FBODaily.com | FedBizOpps: PRESOL | 12 | Fire Suppression System - Combined Synopsis/Solicitation - UFC 3-600-01-Section 21 1300 - Statement of Requirements

FBO DAILY - FEDBIZOPPS ISSUE OF MARCH 12, 2016 FBO #5223
SOLICITATION NOTICE

12 -- Fire Suppression System - Combined Synopsis/Solicitation - UFC 3-600-01-Section 21 1300 - Statement of Requirements

Notice Date: 3/10/2016
Notice Type: Combined Synopsis/Solicitation
NAICS: 333999 — All Other Miscellaneous General Purpose Machinery Manufacturing
Contracting Office: Department of the Air Force, Air Education and Training Command, Maxwell AFB Contracting Squadron, 50 LeMay Plaza South, Bldg 804, Maxwell AFB, Alabama, 36112-6334
ZIP Code: 36112-6334
Solicitation Number: F2X3CE6025A002
Archive Date: 4/7/2016
Point of Contact: Monica Philpot, Phone: 334-953-3528, Marcus Abram, Phone: 334-953-3526
E-Mail Address: monica.philpot@us.af.mil, marcus.abram@us.af.mil
(monica.philpot@us.af.mil, marcus.abram@us.af.mil)
Small Business Set-Aside: N/A
Description: Statement of Requirements UFC 3-600-01 - Fire Protection Engineering for Facilities; Unified Facilities Criteria (UFC); 26 September 2006 Change 3, 1 March 2013. Combo GENERAL INFORMATION The 42nd Contracting Squadron, 50 LeMay Plaza, Bldg 804, Maxwell AFB, AL has a requirement to purchase Fire Suppression Systems for 823 Red Horse Squadron (RHS) Vigilant Warrior Site. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This requirement is issued as a Request for Quote (RFQ) (RFQ-F2X3CE6025A002). The solicitation document and incorporated provisions and clauses are those in effect the Federal Acquisition Circular 2005-87 (07 Mar 2016) and the DPN 20160226 effective 26 Feb 2016. A Firm Fixed Priced Award will be made in accordance with the following: NAICS Code: 333999; size standard: 500 The Defense Priorities and Allocations System rating is C9E. IMPORTANT NOTES: 1. THE GOVERNMENT IS SOLICITING FOR "OPEN MARKET" QUOTES ONLY. GENERAL SERVICES ADMINISTRATION (GSA) QUOTES WILL NOT BE CONSIDERED. 2. ALL PRODUCTS MUST BE NEW; NO REFURBISHED OR USED ITEMS WILL BE ACCEPTED. NATURE OF ACQUISITON: The 823 RHS Vigilant Warrior Site in Titus, AL has a requirement to purchase the below listed items outlined in CLINS 0001 - CLINS 0004. This procurement will be awarded under Simplified Acquisition Procedures. All inquiries/responses to this notice must be received by 23 March 2016, 4:00 p.m CST. SCHEDULE OF SUPPLIES/SERVICES: This acquisition is for the purchase of the following items: CLIN 0001: Parts and Equipment for Automatic Sprinkler Fire Suppression System for 4,500 sq ft Assembly facility in accordance with (IAW) the attached SOR paragraph 1.1 - 1.1.11. Estimated Quantity: - 1 Each CLIN 0002: Installation for Automatic Sprinkler Fire Suppression System for 4,500 sq ft Assembly facility IAW the attached SOR paragraph 2.0 - 2.5. Estimated Quantity: 1 Each CLIN 0003: Parts and Equipment for Automatic Sprinkler Fire Suppression System for eight (8) 968 sq ft lodging facilities and six (6) 660 sq ft lodging facilities IAW the attached SOR paragraph 1.2. - 1.2.9. Estimated Quantity: 14 Each CLIN 0004: Installation for Automatic Sprinkler Fire Suppression System for eight (8) 968 sq ft lodging facilities and six (6) 660 sq ft lodging facilities IAW the attached SOR paragraph 2.0 - 2.5. Estimated Quantity: 14 Each DELIVERY INFORMATION Delivery Address: 823d Red Horse Squadron Attention: Capt. Leonard 241 Lakeland Dr. Titus, AL 36080 Shipping will be FOB Destination QUOTATION PREPARATION INSTRUCTIONS To ensure timely and equitable evaluation of quotes, offerors must comply with instructions contained herein. Quotes must be complete, self-sufficient, and respond directly to the requirements of this RFQ. a. The offeror must submit dated quote on company letterhead with unit prices and extended prices in response to this solicitation. In doing so and without taking any exception to the requirements of this synopsis/solicitation, including Statement of Requirement, "Schedule of Supplies/Services", and terms and conditions, the offeror accedes to all solicitation requirements. Offerors must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale. b. Offerors must include a completed copy of the provisions at FAR 52.212-3, Alternate I, Offeror Representations and Certifications - Commercial Items and 252.225-7035 Buy American-Free Trade Agreements-Balance Of Payments Program Certificate-Basic. c. Interested parties capable of providing the requirement must submit a written quote to include discount terms, tax identification number, cage code, and DUNS. d. To be eligible to receive an award resulting from this RFQ, contractors must be registered in the DoD Systems for Award Management database, no exceptions. To register, please visit http://www.sam.gov or by calling 1-866-606-8220. e. Responses to this notice shall be provided in writing via e-mail to Monica Philpot at monica.philpot@us.af.mil and Marcus Abram at marcus.abram@us.af.mil. All responses shall be received NLT 4:00 PM CST on 23 March 2016. Email is the preferred method. Points of Contact: Monica Philpot, Contracting Specialist; Phone (334) 953-3528, Fax (334) 953-3543 and Marcus Abram, Contracting Officer, Phone (334)953-3526. f. Project Milestone Plan (PMP): The contractor provide a a PMP that shows a timeline from issuance of the contract to delivery of the Fire Suppression System to the delivery location identifed in this solicitation. The PMP may be expressed in terms of "days after contract". The PMP shalll include, at a minimum a timeline for: Description Days After Contract Product Design Product Ordering Product Delivery Product Installation g. A site visit is scheduled at the Vigiliant Warrior Camp on Thursday, March 17, 2016 at 11:00 A.M. CST. Bidders/Offerors should be at 241 Lakeland Dr. Titus, AL 36080. Please provide a list of all attendees. All attendee's names will need to be submitted by Tuesday, 15 March, 2016 at 4:00 P.M. CST. In addition to the attendees name include their title, and a telephone number for each individual. Submit your request to Monica Philpot at monica.philpot@us.af.mil and Mr. Marcus Abram at marcus.abram@us.af.mil. Offerors are encouraged to visit the site and take steps as may be reasonably necessary to ascertain the nature and location of work and the general and local conditions that can affect the work or cost thereof. Failure to do so will not relieve offerors from the responsibility for estimating properly the difficulty or cost of successfully performing the work. The Government will assume no responsibility for any understanding or representation concerning conditions made by any of its officers or agents prior to the execution of the contract, unless included in the request for quote, the specification, or related documents. All pertinent questions shall be submitted by e-mail by Monday, March 21, 2016 at 1:00 P.M. CST. IMPORTANT NOTE: Multiple Offerors nor Multiple Awards will be considered. A single award will be made in the resultant contract. BASIS FOR AWARD Award will be based on technical acceptability and price. For quotes determined technically acceptable, a best value selection will be made based on price. Offeor must meet the following requirements to be determined technically acceptable: a) Meets all the minimum requirements, included in SOR paragraphs 1.1 - 1.2.9 and takes no exception to the requirements of this synopsis/solicitation, including specification, "Schedule of Supplies/Services." b) Project Milestone Plan (PMP): The PMP will be evaluated to ensure a reasonable timeline is established from issuance of the contract to delivery of the Fire Suppression System to the delivery location identifed in this solicitation. The PMP may be expressed in terms of "days after contract". This PMP shall include, at a minimum, a timeline for: Description Days After Contract Product Design Product Ordering Product Delivery Product Installation Quotes will be assigned ratings of Acceptable (clearly meets minimum requirements) or Unacceptable (does not clearly meet minimum requirements). CONTRACT TERMS AND CONDITIONS: The following clauses apply: By reference: 52.204-9, Personal Identity Verification of Contractor Personnel (Jan 2011) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2015) 52.204-13, System for Award Management Maintenance (Jul 2013) 52.209-6, Protecting the Governments Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Oct 2015) 52.209-10, Prohibition on Contracting With Inverted Domestic Corporations (Nov 2015) 52.211-17, Delivery of Excess Quantities (Sep 1989) 52.212-4,Contract Terms and Conditions -- Commercial Items (May 2015) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2014) 52.219-28, Post Award Small Business Program Representation (Jul 2013) 52.222-19, Child Labor - Cooperation with Authorities and Remedies (Feb 2016) 52.222-21, Prohibition of Segregated Facilities (Apr 2015) 52.222-22, Previous Contracts and Compliance Reports (Feb 1999) 52.222-26, Equal Opportunity (Apr 2015) 52.222-36, Affirmative Action for Workers with Disabilities (Jul 2014) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) 52.232-33, Payment by Electronic Funds Transfer- System for Award Management (Jul. 2013) 52.233-3, Protest after Award (Aug 1996) 52.233-4, Applicable Law For Breach Of Contract Claim (OCT 2004) 252.203-7000, Requirements Related to Compensation of Former DoD officials (Sep 2011) 252.203-7002, Requirement to Inform Employees of Whistleblower Rights (Sep 2013) 252.204-7003, Control of Government Personnel Work Product (Apr 1992) 252.211-7008, Use of Government-Assigned Serial Numbers (Sep 2010) 252.223-7008, Prohibition of Hexavalent Chromium (Jun 2013) 252.225-7002, Qualifying Country Sources as Subcontractors (Dec 2012) 252.225-7036, Buy American - Free Trade Agreements - Balance of Payments 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports (Jun 2012) 252.232-7010, Levies on Contract Payments (Dec 2006) 252.243-7001, Pricing of Contract Modifications (Dec 1991) 252.244-7000, Subcontracts for Commercial Items (Jun 2013) 252.247-7023, Transportation of Supplies by Sea (Apr 2014) By Full Text: Electronic Submission Of Payment Requests And Receiving Reports (Jun 2012) (a) Definitions. As used in this clause- (1) "Contract financing payment" and "invoice payment" have the meanings given in section 32.001 of the Federal Acquisition Regulation. (2) "Electronic form" means any automated system that transmits information electronically from the initiating system to all affected systems. Facsimile, e-mail, and scanned documents are not acceptable electronic forms for submission of payment requests. However, scanned documents are acceptable when they are part of a submission of a payment request made using Wide Area WorkFlow (WAWF) or another electronic form authorized by the Contracting Officer. (3) "Payment request" means any request for contract financing payment or invoice payment submitted by the Contractor under this contract. (4) "Receiving report" means the data required by the clause at 252.246-7000, Material Inspection and Receiving Report. (b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests and receiving reports using WAWF, in one of the following electronic formats that WAWF accepts: Electronic Data Interchange, Secure File Transfer Protocol, or World Wide Web input. Information regarding WAWF is available on the Internet at https://wawf.eb.mil/. (c) The Contractor may submit a payment request and receiving report using other than WAWF only when- (1) The Contracting Officer administering the contract for payment has determined, in writing, that electronic submission would be unduly burdensome to the Contractor. In such cases, the Contractor shall include a copy of the Contracting Officer's determination with each request for payment; (2) DoD makes payment for commercial transportation services provided under a Government rate tender or a contract for transportation services using a DoD-approved electronic third party payment system or other exempted vendor payment/invoicing system (e.g., PowerTrack, Transportation Financial Management System, and Cargo and Billing System); (3) DoD makes payment for rendered health care services using the TRICARE Encounter Data System (TEDS) as the electronic format; or (4) When the Governmentwide commercial purchase card is used as the method of payment, only submission of the receiving report in electronic form is required. (d) The Contractor shall submit any non-electronic payment requests using the method or methods specified in Section G of the contract. (e) In addition to the requirements of this clause, the Contractor shall meet the requirements of the appropriate payment clauses in this contract when submitting payment requests. (End of clause) FAR 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (DEVIATION 2013-O0019) (MAR 2016) (a) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (a) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (b) (1) Notwithstanding the requirements of any other clause in this contract, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (b)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (41 U.S.C. 3509). (ii) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow down required in accordance with paragraph (1) of FAR clause 52.222-17. (iv) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). (v) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246). (vi) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212). (vii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793). (viii) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212). (ix) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (x) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67). (xi) ____ (A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627). ___ (B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 E.O. 13627). (xii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.) (xiii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67) (xiv) 52.222-54, Employment Eligibility Verification (Oct 2015). (xv) 52.222-55, Minimum Wages Under Executive Order 13658 (Mar 2016) (E.O. 13658). (xvi) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note). (xvii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xviii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (xviii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of Clause) 52.252-2 -- CLAUSES INCORPORATED BY REFERENCE (Feb 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/vffara.htm (End of Clause) 52.252-6--Authorized Deviations in Clauses (Apr 1984) (a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause. (b) The use in this solicitation or contract of any Defense Federal Acquisition Regulation (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of Clause) 5352.201-9101 Ombudsman APR 2014 (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, Primary: Mr. David E. Jones, Deputy Chief, Contracting Division, HQ AFICA/KT; Alternate: Mr. Stephen G. Smith, Chief, Acquisition Support Branch, HQ AFICA/KTC; Address: 2035 First Street West, Ste 1, JBSA Randolph AFB TX 78150-4324; Telephone Numbers: (210) 652-7907 or (210) 652-7075; Facsimile Number: (210) 652-8344; and E-mail Addresses: david.jones.3@us.af.mil or stephen.smith@randolph.af.mil. Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/HQ AFICA/AFISRA/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431. (INTERIM CHANGE: See Policy Memo 14-C-05) (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer. (End of clause) 252.211-7003 Item Unique Identification and Valuation (Dec 2013) (a) Definitions. As used in this clause- "Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media. "Concatenated unique item identifier" means- (1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or (2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number. "Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022. "Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows. "DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html. "DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number. "Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items. "Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency. "Government's unit acquisition cost" means- (1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery; (2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and (3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery. "Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise (i.e., Dun & Bradstreet's Data Universal Numbering System (DUNS) Number, GS1 Company Prefix, Allied Committee 135 NATO Commercial and Government Entity (NCAGE)/ Commercial and Government Entity (CAGE) Code, or the Coded Representation of the North American Telecommunications Industry Manufacturers, Suppliers, and Related Service Companies (ATIS-0322000) Number), European Health Industry Business Communication Council (EHIBCC) and Health Industry Business Communication Council (HIBCC)), as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.nen.nl/Normontwikkeling/Certificatieschemas-en-keurmerken/Schemabeheer/ISOIEC-15459.htm under "Register." "Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier. "Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts. "Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions. "Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards. "Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface. "Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent. "Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise. "Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment. "Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier. "Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier. "Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto. "Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent. "Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html. (b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item. (c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following: (i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items: Contract Line, Subline, or Exhibit Line Item Number Item Description (ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table: Contract Line, Subline, or Exhibit Line Item Number Item Description ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ (If items are identified in the Schedule, insert "See Schedule" in this table.) (iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ____. (iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____. (v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability. (2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor. (3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification. (4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that- (i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor: (A) Application Identifiers (AIs) (FormatIndicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and (ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media. (5) Unique item identifier. (i) The Contractor shall- (A) Determine whether to- (1) Serialize within the enterprise identifier; (2) Serialize within the part, lot, or batch number; or (3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and (B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version; (C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and (D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version. (ii) The issuing agency code- (A) Shall not be placed on the item; and (B) Shall be derived from the data qualifier for the enterprise identifier. (d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information: (1) Unique item identifier. (2) Unique item identifier type. (3) Issuing agency code (if concatenated unique item identifier is used). (4) Enterprise identifier (if concatenated unique item identifier is used). (5) Original part number (if there is serialization within the original part number). (6) Lot or batch number (if there is serialization within the lot or batch number). (7) Current part number (optional and only if not the same as the original part number). (8) Current part number effective date (optional and only if current part number is used). (9) Serial number (if concatenated unique item identifier is used). (10) Government's unit acquisition cost. (11) Unit of measure. (12) Type designation of the item as specified in the contract schedule, if any. (13) Whether the item is an item of Special Tooling or Special Test Equipment. (14) Whether the item is covered by a warranty. (e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information: (1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part. (2) Unique item identifier of the embedded subassembly, component, or part. (3) Unique item identifier type.** (4) Issuing agency code (if concatenated unique item identifier is used).** (5) Enterprise identifier (if concatenated unique item identifier is used).** (6) Original part number (if there is serialization within the original part number).** (7) Lot or batch number (if there is serialization within the lot or batch number).** (8) Current part number (optional and only if not the same as the original part number).** (9) Current part number effective date (optional and only if current part number is used).** (10) Serial number (if concatenated unique item identifier is used).** (11) Description. ** Once per item. (f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows: (1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/. (2) Embedded items shall be reported by one of the following methods- (i) Use of the embedded items capability in WAWF; (ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or (iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ___, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423. (g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items. (End of clause The following provisions apply: FAR 52.204-7, System for Award Management (Jul 2013) FAR 52.212-1, Instructions to Offerors -- Commercial Items (Oct 2015) FAR 52.212-3, ALT 1, Offeror Representations and Certificatios - Commerical Items (Mar 2016) Offerors are reminded that Representations and Certifications are maintained at the following website: https://www.sam.gov. In the event Representations and Certifications are not on file, Offerors must include a completed copy of the provisions at FAR Part 52 or on on-line at http://farsite.hill.af.mil. DFARS 252.204-7004, Alternate A, System for Award Management (Feb 2014) DFARS 252.204-7011, Alternative Line Item Structure (Sept 2011) 252.225-7035 BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (NOV 2014) (a) Definitions. "Bahrainian end product," "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "foreign end product," "Moroccan end product," "Panamanian end product," "Peruvian end product," "qualifying country end product," and "United States," as used in this provision, have the meanings given in the Buy American-Free Trade Agreements-Balance of Payments Program-Basic clause of this solicitation. (b) Evaluation. The Government- (1) Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and (2) For line items subject to the Buy American-Free Trade Agreements-Balance of Payments Program-Basic clause of this solicitation, will evaluate offers of qualifying country end products or Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products without regard to the restrictions of the Buy American or the Balance of Payments Program. (c) Certifications and identification of country of origin. (1) For all line items subject to the Buy American-Free Trade Agreements-Balance of Payments Program-Basic clause of this solicitation, the offeror certifies that- (i) Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product; and (ii) Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country. (2) The offeror shall identify all end products that are not domestic end products. (i) The offeror certifies that the following supplies are qualifying country (except Australian or Canadian) end products: (Line Item Number) (Country of Origin) (ii) The offeror certifies that the following supplies are Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products: (Line Item Number) (Country of Origin) (iii) The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of "domestic end product": (Line Item Number) (Country of Origin (If known)) (End of provision) Attachment: Statement of Requirements
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AETC/MaxAFBCS/F2X3CE6025A002/listing.html)
Place of Performance: Address: Titus, Alabama, 36080, United States; Zip Code: 36080
Record: SN04046023-W 20160312/160310235014-b6cb89d73851ff64d9a4b89df44af7d3 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

12 -- Fire Suppression System - Combined Synopsis/Solicitation - UFC 3-600-01-Section 21 1300 - Statement of Requirements