FBODaily.com | FedBizOpps: PRESOL | 81 | APF ISO CONTAINERS

FBO DAILY - FEDBIZOPPS ISSUE OF FEBRUARY 18, 2016 FBO #5200
SOLICITATION NOTICE

81 -- APF ISO CONTAINERS

Notice Date: 2/16/2016
Notice Type: Combined Synopsis/Solicitation
NAICS: 332439 — Other Metal Container Manufacturing
Contracting Office: Department of the Air Force, Air Force Materiel Command, AFLCMC / AFSC / AFNWC - HILL AFB, ., Hill AFB, Utah, 84056, United States
ZIP Code: 84056
Solicitation Number: F2DCAE5337B001
Archive Date: 3/23/2016
Point of Contact: Barbara E. Dustin, Phone: 8017754537
E-Mail Address: barbara.dustin@us.af.mil
(barbara.dustin@us.af.mil)
Small Business Set-Aside: Total Small Business
Description: This solicitation, which is for commercial items as described under the requirements section below, is expected to result in the award of a firm-fixed-price contract. This solicitation is prepared in accordance with the format in the Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and no further notice or solicitation will be issued. An award, if any, will be made to the responsible Offeror who submits a proposal that: 1. Conforms to the requirements of the solicitation to include the Product Description (Attachment 1) included in this solicitation. 2. That submits the proposal with the lowest total price and is determined fair and reasonable. Submittal of quotes in response to this solicitation constitutes agreement by the Offeror of all terms & conditions contained herein, which will also be the terms & conditions of any resulting contract. It is the Offeror's responsibility to be familiar with the applicable clauses and provisions. Clauses and provisions in full text may be accessed via the Internet at website http://farsite.hill.af.mil. The Government reserves the right to award without discussions or make no award at all depending upon the quality of responses received and the price fair and reasonableness of the responses received. The solicitation number for this requirement is F2DCAE5337B001 and is hereby issued as a Request for Quotes (RFQ) using FAR Subpart 13, Simplified Acquisition Procedures. This requirement is being solicited as a total small-business set-aside pursuant to FAR Subpart 19.5. NAICS Code: 332439 - Other Metal Container Manufacturing Size Standard: 500 employees Synopsis Closing Date: Proposals must be received not later than 12:30 pm Mountain Standard Time, 8 March 2016. Acceptable means of Submission: All submissions must be submitted electronically to the following email address - barbara.dustin@us.af.mil Any correspondence sent via e-mail must contain the subject line "F2DCAE5337B001 ISO Containers." The entire proposal must be contained in a single e-mail, unless otherwise approved and that does not exceed 5 megabytes including attachments. E-mails with compressed files will not be accepted. Note that e-mail filters at Hill Air Force Base are designed to filter e-mails without subject lines or with suspicious subject lines or contents (i.e.,.exe or.zip files). Therefore, if the specified subject line is not included, the e-mail may not get through the e-mail filters. Also be advised that.zip or.exe files are not allowable attachments and may be deleted by the email filters at Hill AFB. If sending attachments with email, ensure only.pdf,.doc,.docx,.xls or.xlsx documents are sent. The email filter may delete any other form of attachments. This solicitation incorporates FAR provisions and clauses in effect through Federal Acquisition Circular (FAC) Fac 20015-86, effective 30 Dec 2015 and 01 Jan 2016; Defense Federal Acquisition Regulation Supplement (DFARS) Publication Notice DPN 20151230, effective 30 Dec 2015; and Air Force Federal Acquisition Regulation Supplement (AFFARS) Air Force Acquisition Circular (AFAC) 2015-1001, effective 01 Oct 2015. Delivery Destination: FV2019 Military Ocean Terminal Sunny Point (MOTSU) 596 Transportation Brigade 6280 Sunny Point Road Southport, NC 28461 Delivery Type: FOB Destination (As defined in FAR 2.101-Definitions, the seller or consignor is responsible for the cost of shipping and risk of loss.) Inspection and Acceptance: Both inspection and acceptance will be by the Government at Destination. Requirements: The following paragraphs include specifications for Intermodal Shipping Containers (ISO Containers). ISO Containers are IMDG coded and ISO 9000 certified for shipment of ammunition or explosives. All prospective contractors must be registered, and be in good standing, in the System for Award Management (SAM) database to be awarded a DoD contract. The Government will award a contract resulting from this solicitation to the responsible Offeror whose offer conforming to the solicitation represents the lowest priced technically acceptable offer. The Government reserves the right to award no contract at all depending upon (1) the quality of proposals received and (2) the fair and reasonableness of the pricing of proposals received. The following table includes the Technical Rating each proposal will receive. Rating Description Acceptable Proposal clearly meets the minimum requirements of the solicitation. Unacceptable Proposal does not clearly meet the minimum requirements of the solicitation The quotations may be in any format but MUST include: 1. Proposing company's name, address, DUNS number and Cage Code 2. Point of contact's name, phone, and email 3. Quotation number & date 4. Timeframe that the quote is valid 5. Individual item price 6. Total price including shipping (Net 30), No Progress Payments 7. Shipping (FOB Destination) Important Notice to Contractors: Quotations MUST also contain a complete description of items offered and any technical manuals or literature to clearly show that the items meet or exceed the requirements listed in this RFQ. The Contracting Officer will review quotations based on the factors listed in this solicitation and the information furnished by the Offeror. Before price is considered, the proposal must meet the technical specifications from the Product Description, included as Attachment 1 to this solicitation. Important Notice to Contractors: All prospective awardees are required to register at the System for Award Management (SAM) and to maintain active registration during the life of the contract. SAM can be accessed at https://www.sam.gov. Any award resulting from this solicitation will include DFARS Clause 252.232-7003, Electronic Submission of Payment Requests. Section 1008 of the National Defense Authorization Act of Fiscal Year 2001 requires any claims for payment (invoices) under DoD contract to be submitted in electronic form. Wide area Workflow- Receipt and Acceptance (WAWF-RA) is the DoD system of choice for implementing this statutory requirement. Use of the basic system is at no cost to the contractor. Contractors must complete vendor training, which is also available at no cost at http://www.wawftraining.com. Prior to submitting invoices in the production system, contractors must register for an account at http://wawf.eb.mil/. Please direct all questions to Barbara Dustin via email at barbara.dustin@us.af.mil. SUPPLIES OR SERVICES AND PRICES/COSTS The Government shall inspect 5/ea containers at the contractor's site prior to approval to produce and deliver on CLIN 0002. First Article - Government Test All Contractors Must Submit FA Item No. 0001 Firm Fixed Price Quantity U/I Unit Price Amount 5 EA CLIN ACRN ACRN Total 0001 AA NSN: ISO Containers Intermodal Shipping Containers (ISO Containers). ISO Containers are IMDG coded and ISO 9000 certified for shipment of ammunition and explosives. See Product Description at Attachment 1 for a full product description and technical requirements. Priority: Limitations of Liability: Inspection: Acceptance: Inspection/Acceptance Report: Quality Assurance: IUID Required: Applicability: Physical Item Markings: Special Marking Instructions Below Transportation From Continental United States CONUS (CONUS) Sources TYPE / SHIP TO CODE F.O.B. A FV2019 DESTINATION Type / Ship To PACRN Mark For A FV2019 USAF APF Type / Ship To Quantity (U/I) *ARO Contract _ Req No / Pri Required Delivery A FV2019 5 EA *120 Calendar Days Proposed Delivery A FV2019 5 EA ISO Containers - Production Item No. 0002 Firm Fixed Price Quantity U/I Unit Price Amount ISO Containers - Production 245 EA CLIN ACRN ACRN Total 0002 AA NSN: ISO Containers Intermodal Shipping Containers (ISO Containers). ISO Containers are IMDG coded and ISO 9000 certified for shipment of ammunition and explosives. See Product Description at Attachment 1 for a full product description and technical requirements. Priority: Limitations of Liability: Inspection: Acceptance: Inspection/Acceptance Report: Quality Assurance: IUID Required: Applicability: Physical Item Markings: Special Marking Instructions Below Transportation From Continental United States CONUS (CONUS) Sources TYPE / SHIP TO CODE F.O.B. A FV2019 DESTINATION Type / Ship To PACRN Mark For A FV2019 USAF APF Type / Ship To Quantity (U/I) *ARO Approval of First Article _ Req No / Pri Required Delivery A FV2019 245 EA *230 Calendar Days Proposed Delivery A FV2019 245 EA SHIP TO / PLACE OF PERFORMANCE TYPE/CODE: MILITARY OCEAN TERMINAL SUNNY POINT (MOTSU) 596 TRANSPORTATION BRIGADE 6280 SUNNY POINT ROAD SOUTHPORT NC 28461 UNITED STATES MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item) AWARD NUMBER: CONTRACT CLAUSES 252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (IAW DFARS 203.171-4(a), DFARS 212.301(f)(ii)) 252.205-7000 PROVISION OF INFORMATION TO COOPERATIVE AGREEMENT HOLDERS (DEC 1991) (IAW DFARS 205.470, DFARS 212.301(f)(x)) 252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (IAW DFARS 211.274-6(a)(1), DFARS 212.301(f)(xii)) (a) Definitions. As used in this clause- "Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media. "Concatenated unique item identifier" means- (1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or (2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch; and serial number within the original part, lot, or batch number. "Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022. "Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows. "DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid/equivalents.html. "DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number. "Enterprise" means the entity ( e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items. "Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency. "Government's unit acquisition cost" means- (1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery; (2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and (3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery. "Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise ( i.e., Dun & Bradstreet's Data Universal Numbering System (DUNS) Number, GS1 Company Prefix, Allied Committee 135 NATO Commercial and Government Entity (NCAGE)/Commercial and Government Entity (CAGE) Code, or the Coded Representation of the North American Telecommunications Industry Manufacturers, Suppliers, and Related Service Companies (ATIS-0322000) Number), European Health Industry Business Communication Council (EHIBCC) and Health Industry Business Communication Council (HIBCC)), as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.nen.nl/Normontwikkeling/Certificatieschemas-en-keurmerken/Schemabeheer/ISOIEC-15459.htm. "Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier. "Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts. "Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions. "Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards. "Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface. "Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent. "Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise. "Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment. "Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier. "Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier. "Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto. "Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent. "Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html. (b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item. (c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following: (i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:. Contract Line, Subline, or Exhibit Line Item Number Item Description See Schedule as Applicable (ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table: Contract Line, Subline, or Exhibit Line Item Number Item Description *Items less than $5000, which require UID, will be specifically identified in the schedule. See Schedule as Applicable (iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number _____( or See Schedule as Applicable). (iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number _____( or See Schedule as Applicable). (v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability. (2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor. (3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology-International symbology specification-Data matrix; ECC200 data matrix specification. (4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that- (i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor: (A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Indentifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with Air Transport Association Common Support Data Dictionary; and (ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer Syntax for High Capacity Automatic Data Capture Media. (5) U nique item identifier. (i) The Contractor shall- (A) Determine whether to- (1) Serialize within the enterprise identifier; (2) Serialize within the part, lot, or batch number; or (3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number);and (B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version. (C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and (D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version. (ii) The issuing agency code- (A) Shall not be placed on the item; and (B) Shall be derived from the data qualifier for the enterprise identifier. (d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information: (1) Unique item identifier. (2) Unique item identifier type. (3) Issuing agency code (if concatenated unique item identifier is used). (4) Enterprise identifier (if concatenated unique item identifier is used). (5) Original part number (if there is serialization within the original part number). (6) Lot or batch number (if there is serialization within the lot or batch number). (7) Current part number (optional and only if not the same as the original part number). (8) Current part number effective date (optional and only if current part number is used). (9) Serial number (if concatenated unique item identifier is used). (10) Government's unit acquisition cost. (11) Unit of measure. (12) Type designation of the item as specified in the contract schedule, if any. (13) Whether the item is an item of Special Tooling or Special Test Equipment. (14) Whether the item is covered by a warranty. (e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information: (1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part. (2) Unique item identifier of the embedded subassembly, component, or part. (3) Unique item identifier type.** (4) Issuing agency code (if concatenated unique item identifier is used).** (5) Enterprise identifier (if concatenated unique item identifier is used).** (6) Original part number (if there is serialization within the original part number).** (7) Lot or batch number (if there is serialization within the lot or batch number).** (8) Current part number (optional and only if not the same as the original part number).** (9) Current part number effective date (optional and only if current part number is used).** (10) Serial number (if concatenated unique item identifier is used).** (11) Description. ** Once per item. (f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows: (1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/. (2) Embedded items shall be reported by one of the following methods- (i) Use of the embedded items capability in WAWF; (ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or (iii) Via WAWF as a deliverable attachment for exhibit line item number ______, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423. (g) Subcontracts. If the Contractor acquires by subcontract, any items for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items. (The above Clause/Provision has been modified.) 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (IAW FAR 12.301(b)(4)) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015). (2) 52.233-3, Protest After Award (Aug 1996)(31 U.S.C 3553). (3) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004)(Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: [Contracting Officer check as appropriate.] __ __ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sep 2006), with Alternate I (Oct 1995)(41 U.S.C. 4704 and 10 U.S.C. 2402). __ __ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509). __ __ (3) 52.203-15, Whistleblower Protections Under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) __ X __ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2015) (Pub. L. 109-282) (31 U.S.C. 6101 note). (5) [Reserved] __ __ (6) 52.204-14, Service Contract Reporting Requirements (Jan 2014) (Pub. L. 111-117, section 743 of Div. C). __ __ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Jan 2014) (Pub. L. 111-117, section 743 of Div. C). __ __ (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Oct 2015) (31 U.S.C. 6101 note). __ X __ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Jul 2013) (41 U.S.C. 2313). ____ (10) [Reserved} __ __ (11) (i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011)(15 U.S.C. 657a). __ __ (11) (ii) Alternate I (Nov 2011) of 52.219-3. __ __ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer)(15 U.S.C. 657a). __ _ _ (12) (ii) Alternate I (Jan 2011) of 52.219-4. (13) [Reserved] __ X __ (14) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2011)(15 U.S.C. 644). __ __ (14) (ii) Alternate I (Nov 2011). __ __ (14) (iii) Alternate II (Nov 2011). __ __ (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003)(15 U.S.C. 644). __ __ (15) (ii) Alternate I (Oct 1995) of 52.219-7. __ __ (15) (iii) Alternate II (Mar 2004) of 52.219-7. __ X __ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)). __ __ (17) (i) 52.219-9, Small Business Subcontracting Plan (Oct 2015)(15 U.S.C. 637(d)(4)). (In accordance with DDP Memo dated 9 Sep 2013, DAR Tracking Number 2013-O0014, Class Deviation-Summary Subcontract Report Submission, this clause is replaced with DFARS Deviation dated Aug 2013. Effective until incorporated into the FAR or DFARS or until rescinded.) __ __ (17) (ii) Alternate I (Oct 2001) of 52.219-9. __ __ (17) (iii) Alternate II (Oct 2001) of 52.219-9. __ __ (17) (iv) Alternate III (Oct 2015) of 52.219-9. __ (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011) (15 U.S.C. 644(r)). __ X (19) 52.219-14, Limitations on Subcontracting (Nov 2011)(15 U.S.C. 637(a)(14)). __ __ (20) 52.219-16, Liquidated Damages-Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)). __ __ (21) 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside (Nov 2011)(15 U.S.C. 657 f). __ X __ (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C. 632(a)(2)). __ __ (23) 52.219-29, Notice of Set-Aside for, or Sole source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (1 U.S.C. 637(m)). __ __ (24) 52.219-30, Notice of Set-Aside for, or Sole source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)). __ __ (25) 52.222-3, Convict Labor (June 2003)(E.O. 11755). __ __ (26) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan 2016)(E.O. 13126). __ __ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). __ __ (28) 52.222-26, Equal Opportunity (Apr 2015)(E.O. 11246). __ __ (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015)(38 U.S.C. 4212). __ __ (30) 52.222-36, Equal Opportunity For Workers with Disabilities (Jul 2014)(29 U.S.C. 793). __ __ (31) 52.222-37, Employment Reports on Veterans (Oct 2015)(38 U.S.C. 4212). __ X __ (32) 52.222-40, Notification of Employee Rights Under the National Labor relations Act (Dec 2010) E.O. 13496). __ __ (33) (i) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627). __ __ (33) (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627). __ __ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.) __ __ (35) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008)(42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.) __ _ (35) (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.) __ _ (36) (i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514). __ _ (36) (ii) Alternate I (Oct 2015) of 52.223-13. __ _ (37) (i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (Jun 2014) (E.O.s 13423 and 13514). __ _ (37) (ii) Alternate I (Jun 2014) of 52.223-14. __ __ (38) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42.U.S.C. 8259b). __ __ (39) (i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (Oct 2015) (E.O.s 13423 and 13514). __ _ (39) (ii) Alternate I (Oct 2015) of 52.223-16. __ X __ (40) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011)(E.O.13513). __ __ (41) 52.225-1, Buy American--Supplies (May 2014)(41 U.S.C. chapter 83). __ __ (42) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43). __ _ (42) (ii) Alternate I (May 2014) of 52.225-3. __ _ (42) (iii) Alternate II (May 2014) of 52.225-3. __ _ (42) (iv) Alternate III (May 2014) of 52.225-3. __ __ (43) 52.225-5, Trade Agreements (Nov 2013) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note). __ __ (44) 52.225-13, Restriction on Certain Foreign Purchases (Jun 2008)(E.O.s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of Treasury). __ __ (45) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note). __ __ (46) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007)(42 U.S.C. 5150). __ __ (47) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007)(42 U.S.C. 5150). __ __ (48) 52.232-29, Terms for financing of Purchases of Commercial Items (Feb 2002)(41 U.S.C. 4505, 10 U.S.C. 2307(f)). __ __ (49) 52.232-30, Installment Payments for Commercial Items (Oct 1995)(41 U.S.C. 4505, 10 U.S.C. 2307(f)). __ __ (50) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Jul 2013)(31.U.S.C. 3332). __ __ (51) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013)(31.U.S.C. 3332). __ __ (52) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332). __ __ (53) 52.239-1, Privacy or Security Safeguards (Aug 1996)(5 U.S.C. 552a). __ __ (54) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). __ _ (54) (ii) Alternate I (Apr 2003) of 52.247-64. (c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: [Contracting Officer check as appropriate.] __ __ (1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). __ __ (2) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67). __ __ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67). __ __ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (May 2014)(29 U.S.C. 206 and 41 U.S.C. chapter 67). __ __ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards - Price Adjustment (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67). __ __ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67). __ __ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014)(41 U.S.C. chapter 67). __ __ (8) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015)(E. O. 13658). __ __ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). __ __ (10) 52.237-11, Accepting and Dispensing of $1 Coin (Sep 2008) (31 U.S.C. 5112(p)(1)). (d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c) and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in paragraphs (e)(1) of this paragraph in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509). (ii) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow Down required in accordance with paragraph (l) of FAR clause 52.222-17. (iv) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). (v) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246). (vi) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212). (vii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793). (viii) 52.222-37, Employment Reports on Veterans (Oct 2015) (38 U.S.C. 4212). (ix) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (x) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67). (xi) __ __ (A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627). __ __(B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627). (xii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67). (xiii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67). (xiv) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989). (xv) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E. O. 13658). (xvi) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note). (xvii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraphs (e) of FAR clause 52.226-6. (xviii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. 252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (IAW DFARS 223.7306, DFARS 212.301(f)(xxi)) 252.225-7012 PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES (IAW DFARS 225.7002-3(a), DFARS 212.301(f)(xxvii)) 252.226-7001 UTILIZATION OF INDIAN ORGANIZATIONS, INDIAN-OWNED ECONOMIC ENTERPRISES, AND NATIVE HAWAIIAN SMALL BUSINESS CONCERNS (SEP 2004) (IAW DFARS 226.104) 252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (JUN 2012) (IAW DFARS 232.7004) (a) Definitions. As used in this clause- (1) "Contract financing payment" and "invoice payment" have the meanings given in section 32.001 of the Federal Acquisition Regulation. (2) "Electronic form" means any automated system that transmits information electronically from the initiating system to all affected systems. Facsimile, e-mail, and scanned documents are not acceptable electronic forms for submission of payment requests. However, scanned documents are acceptable when they are part of a submission of a payment request made using Wide Area WorkFlow (WAWF) or another electronic form authorized by the Contracting Officer. (3) "Payment request" means any request for contract financing payment or invoice payment submitted by the Contractor under this contract. (4) "Receiving report" means the data required by the clause at 252.246-7000, Material Inspection and Receiving Report. (b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests and receiving reports using WAWF, in one of the following electronic formats that WAWF accepts: Electronic Data Interchange, Secure File Transfer Protocol, or World Wide Web input. Information regarding WAWF is available on the Internet at https://wawf.eb.mil/. (c) The Contractor may submit a payment request and receiving report using other than WAWF only when- (1) The Contracting Officer administering the contract for payment has determined, in writing, that electronic submission would be unduly burdensome to the Contractor. In such cases, the Contractor shall include a copy of the Contracting Officer's determination with each request for payment; (2) DoD makes a payment for commercial transportation services provided under a Government rate tender or a contract for transportation services using a DoD-approved electronic third party payment system or other exempted vendor payment/invoicing system ( e.g., PowerTrack, Transportation Financial Management System, and Cargo and Billing System); (3) DoD makes payment for rendered health care services using the TRICARE Encounter Data System (TEDS) as the electronic format; or (4) When the Governmentwide commercial purchase card is used as the method of payment, only submission of the receiving report in electronic form is required. (d) The Contractor shall submit any non-electronic payment requests using the method or methods specified in Section G of the contract. (e) In addition to the requirements of this clause, the Contractor shall meet the requirements of the appropriate payment clauses in this contract when submitting payment requests. 252.232-7010 LEVIES ON CONTRACT PAYMENTS (IAW DFARS 232.7102) 252.243-7002 REQUESTS FOR EQUITABLE ADJUSTMENT (IAW DFARS 243.205-71) 252.244-7000 SUBCONTRACTS FOR COMMERCIAL ITEMS (IAW DFARS 244.403) 252.247-7023 TRANSPORTATION OF SUPPLIES BY SEA--BASIC (IAW DFARS 247.574(b)) ADDENDUM TO CLAUSE 52.212-4 5352.201-9101 OMBUDSMAN (IAW AFFARS 5301.9103) (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, Kevin at 801 777 - 6549, FAX 801 777 - 6830, email kevin.flinders@us.af.mil. Concerns, issues, Flinders disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer. 52.202-1 DEFINITIONS (IAW FAR 2.201) 52.203-3 GRATUITIES (IAW FAR 3.202) 52.203-5 COVENANT AGAINST CONTINGENT FEES (IAW FAR 3.404) 52.203-7 ANTI-KICKBACK PROCEDURES (IAW FAR 3.502-3) 52.203-8 CANCELLATION, RESCISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR IMPROPER ACTIVITY (IAW FAR 3.104-9(a)) 52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY (IAW FAR 3.104-9(b)) 52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS (OCT 2010) (IAW FAR 3.808(b)) 252.203-7001 PROHIBITION ON PERSONS CONVICTED OF FRAUD OR OTHER DEFENSE-CONTRACT-RELATED FELONIES (IAW DFARS 203.570-3) 252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (SEP 2013) (IAW DFARS 203.970) 252.203-7997 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS (DEVIATION 2016-O0003) (OCT 2015) (IAW DARS Tracking # 2016-O0003) (a) The Contractor shall not require employees or subcontractors seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (b) The Contractor shall notify employees that the prohibitions and restrictions of any internal confidentiality agreements covered by this clause are no longer in effect. (c) The prohibition in paragraph (a) of this clause does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (d) (1) Use of funds appropriated (or otherwise made available) by the Continuing Appropriations Act, 2016 (Pub. L. 114-53) or any other FY 2016 appropriations act that extends to FY 2016 funds the same prohibitions as contained in sections 743 of division E, title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) may be prohibited, if the Government determines that the Contractor is not in compliance with the provisions of this clause. (2) The Government may seek any available remedies in the event the Contractor fails to perform in accordance with the terms and conditions of the contract as a result of Government action under this clause. 52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON RECYCLED PAPER (IAW FAR 4.303) 52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (IAW FAR 4.1804(c), FAR 12.301(d)) 52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEC 2014) (IAW FAR 4.1202(b)) 252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (IAW DFARS 204.404-70(b)) 252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (IAW DFARS 204.7304(c)) 252.204-7015 DISCLOSURE OF INFORMATION TO LITIGATION SUPPORT CONTRACTORS (FEB 2014) (IAW DFARS 204.7403(c), DFARS 212.301(f)(ix)) 52.209-4 FIRST ARTICLE APPROVAL--GOVERNMENT TESTING (IAW FAR 9.308-2(a)(1), FAR 9.308-2(b)(1)) (a) The Contractor shall deliver ** units(s) of Lot/Item * within *** calendar days from the date of this contract to the Government at **** for first article tests. The shipping documentation shall contain this contract number and the Lot/Item identification. The characteristics that the first article must meet and the testing requirements are specified elsewhere in this contract. First Article Item **Quantity ***Calendar Days ****Type/Location **CLIN 0001 5 120 contractor's site (b) Within ** calendar days after the Government receives the first article, the Contracting Officer shall notify the Contractor, in writing, of the conditional approval, approval, or disapproval of the first article. The notice of conditional approval or approval shall not relieve the Contractor from complying with all requirements of the specifications and all other terms and conditions of this contract. A notice of conditional approval shall state any further action required of the Contractor. A notice of disapproval shall cite reasons for the disapproval. *Lot/Item **Approval Days ELIN No. 0001 15 15 N/A (c) If the first article is disapproved, the Contractor, upon Government request, shall submit an additional first article for testing. After each request, the Contractor shall make any necessary changes, modifications, or repairs to the first article or select another first article for testing. All costs related to these tests are to be borne by the Contractor, including any and all costs for additional tests following a disapproval. The Contractor shall furnish any additional first article to the Government under the terms and conditions and within the time specified by the Government. The Government shall act on this first article within the time limit specified in paragraph (b) above. The Government reserves the right to require an equitable adjustment of the contract price for any extension of the delivery schedule or for any additional costs to the Government related to these tests. (d) If the Contractor fails to deliver any first article on time, or the Contracting Officer disapproves any first article, the Contractor shall be deemed to have failed to make delivery within the meaning of the Default clause of this contract. (e) Unless otherwise provided in the contract, the Contractor- (1) May deliver the approved first article as a part of the contract quantity, provided it meets all contract requirements for acceptance and was not consumed or destroyed in testing; and (2) Shall remove and dispose of any first article from the Government test facility at the Contractor's expense. (f) If the Government does not act within the time specified in paragraph (b) or (c) above, the Contracting Officer shall, upon timely written request from the Contractor, equitably adjust under the Changes clause of this contract the delivery or performance dates and/or the contract price, and any other contractual term affected by the delay. (g) The Contractor is responsible for providing operating and maintenance instructions, spare parts support, and repair of the first article during any first article test. (h) Before first article approval, the acquisition of materials or components for, or the commencement of production of, the balance of the contract quantity is at the sole risk of the Contractor. Before first article approval, the costs thereof shall not be allocable to this contract for (1) progress payments, or (2) termination settlements if the contract is terminated for the convenience of the Government. (i) The Government may waive the requirement for first article approval test where supplies identical or similar to those called for in the schedule have been previously furnished by the Offeror/Contractor and have been accepted by the Government. The Offeror/Contractor may request a waiver. (The above Clause/Provision has been modified.) 252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE GOVERNMENT OF A COUNTRY THAT IS A STATE SPONSOR OF TERRORISM (OCT 2015) (IAW DFARS 209.409) 52.211-5 MATERIAL REQUIREMENTS (IAW FAR 11.304) 52.211-8 TIME OF DELIVERY (IAW FAR 11.404(a)(2)) (a) The Government requires delivery to be made according to the following schedule: DELIVERY FOR EACH ITEM IS ANNOTATED IN THE SCHEDULE (PART I SECTION B) UNDER EACH LINE ITEM. The Government will evaluate equally, as regards time of delivery, offers that propose delivery of each quantity within the applicable delivery period specified above. Offers that propose delivery that will not clearly fall within the applicable required delivery period specified above, will be considered nonresponsive and rejected. The Government reserves the right to award under either the required delivery schedule or the proposed delivery schedule, when an offeror offers an earlier delivery schedule than required above. If the offeror proposes no other delivery schedule, the required delivery schedule above will apply. ANNOTATE YOUR PROPOSED DELIVERY, IF ANY, UNDER THE GOVERNMENT'S DELIVERY SET FORTH UNDER EACH ITEM IN THE SCHEDULE. (b) Attention is directed to the Contract Award provision of the solicitation that provides that a written award or acceptance of offer mailed, or otherwise furnished to the successful offeror, results in a binding contract. The Government will mail or otherwise furnish to the offeror an award or notice of award not later than the day award is dated. Therefore, the offeror should compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the Contractor's date of receipt of the contract or notice of award by adding (1) five calendar days for delivery of the award through the ordinary mails, or (2) one working day if the solicitation states that the contract or notice of award will be transmitted electronically. (The term "working day" excludes weekends and U.S. Federal holidays.) If, as so computed, the offered delivery date is later than the required delivery date, the offer will be considered nonresponsive and rejected. (The above Clause/Provision has been modified.) 52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (IAW FAR 11.604(b)) This is a rated order certified for national defense, emergency preparedness, and energy program use, and the Contractor shall follow all the requirements of the Defense Priorities and Allocations System regulation (15 CFR 700). ITEM IDENTIFICATION MARKING AND SHELF LIFE ITEM PROVISIONS (IAW AFMCI 23-102 Chapter 6 Para 6.2.7.3) Requirements set forth below shall apply to any contract issued thereon and will take precedence over other inconsistent requirements herewith. All standards, bulletins, and publications referenced herein shall be of the issue in effect on the date of this document. 1. PHYSICAL MARKING OF ITEMS: SPECIAL INSTRUCTIONS: Items shall be marked in accordance with: (See Individual Line Item) (The above Clause/Provision has been modified.) 2. PACKAGE AND CONTAINER MARKING: Shipments will not be made until the NSN has been assigned, unless specifically authorized by the Contracting Officer. MIL-STD-129/ASTM-D-3951: a. Interior packages and shipping containers shall be marked in accordance with MIL-STD-129 when Military packing is specified and ASTM-D-3951 when commercial packaging is specified. The requirements of paragraph 2.h apply regardless of which packaging is utilized. (1) Design manufacturer's name, trademark or manufacturer's code (from Cataloging Handbook H4-1 or H4-2), identifying number, and serial number, when applicable, shall be included in the identification marking. (2) When applicable, the Air Force project designator code shall be included as the last line of the address marking and the project name related to the project code shall be marked in the clear on the exterior shipping container. b. Tags and labels, when required, shall be contractor's tags or labels conforming to the requirements of MIL-STD-129 or as approved by the procuring activity. Contractor's forms which indicate serviceable condition shall not be any shade of green or red. Labels are authorized to be used on metal containers. Items requiring technical order (T.O.) certification shall be annotated on inner and outer container tags or label with T.O. compliance. c. When dummy containers are used in a unitized load, the dummy containers shall be clearly marked "DUMMY CONTAINER" and located in the load so that the marking will be plainly visible to receiving and storage personnel. d. All interior packages and shipping containers for articles and materials classified as hazardous or restricted under provisions of Title 49, Code of Federal Regulations, or AFR 71-4/DLAM 4145.3/TM 38-250/NAVSUP PUB 505/MCO P 4030.19 shall be marked, regardless of exemption for mode of transportation, with proper shipping name of item; flash point of all liquids having a flash point of 200 degrees F. or below; and percentage concentration of acids and corrosive liquids. In addition, the quantity of each hazardous or restricted material included in a container shall be annotated adjacent to the shipping name of the item, e.g., Acetic Acid (80% concentration) -- 1 qt. e. On shipments of firearms regardless of mode of transportation, selected elements of identification and contractor data markings shall be omitted or obliterated in accordance with the requirements of MIL-STD-129 regarding sensitive items and packing lists shall be placed only inside the containers. f. Special markings for packages and containers when specified on AFMC Form 158 shall be complied with as a part of MIL-STD-129. g. All special coated terneplate containers shall be marked with the legend "CAUTION--DO NOT REUSE AS FOOD CONTAINERS." h. Bar code markings in accordance with MIL-STD-129 shall apply to all units, intermediate and exterior containers for all items going into stock regardless of package size or levels of package specified (including commercial packaging). In addition to the NSN/NATO stock number, the exterior shipping container shall include the 13 digit contract number (plus, if applicable, the four digit call number). Excluded from Bar Code Marking are: (1) Foreign Military Sales. (2) Direct Vendor Delivery (DVD)/Government Furnished Equipment (GFE) shipments. (3) Multipack Exterior Shipping Containers. (Unit and intermediate containers do require a bar coded NSN/NATO stock number. However, the next container (unit or intermediate) inside the multipack will also require a bar coded NSN/NATO stock number and contract number with call number, if applicable, in the lower right hand corner). (4) All unpacked or uncrated items; e.g., vehicles, tires, etc. i. Shipments of wheeled items weighing 2,000 pounds or more and scheduled for transportation by military aircraft will be marked with the individual axle weights in accordance with MIL-STD-129. 3. WARRANTED ITEMS: When the contract contains warranty requirements, warranty information shall be applied on containers and items as follows: a. Container markings shall be as specified in MIL-STD-129. The period or conditions of the warranty shall be specifically stated, i.e., landings, flight hours, operating hours, days from shipping date, etc. b. Items shall be marked in accordance with requirements of MIL-STD-130. Markings shall be located in a manner so as to be conspicuous to the person removing the item from service.When no deleterious effect or functional degradation is caused, the markings shall be black letters on yellow FED-STD-595 color 13655) background. The marking shall include the same period or condition required on the containers. 4. SHELF LIFE ITEMS a. MARKING (1) Shelf life items shall be marked in accordance with MIL-STD-129. (2) Mark items controlled in MIL-STD-1523, or in specifications furnished as a part of the contract or purchase order, with the cure or assembly dates specified therein. b. DELIVERY. Unless specified otherwise in the contract, shelf life items shall have a minimum of 90% of the "storage period" remaining at the time of delivery to the Government. 52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL ITEMS (IAW FAR 12.301(b)(3)) 252.222-7006 RESTRICTIONS ON THE USE OF MANDATORY ARBITRATION AGREEMENTS (DEC 2010) (IAW DFARS 222.7405) 52.223-6 DRUG-FREE WORKPLACE (IAW FAR 23.505) 252.225-7048 EXPORT-CONTROLLED ITEMS (IAW DFARS 225.7901-4) 52.229-3 FEDERAL, STATE, AND LOCAL TAXES (IAW FAR 29.401-3(a)) 52.232-17 INTEREST (IAW FAR 32.611(a), FAR 32.611(b)) 52.232-23 ASSIGNMENT OF CLAIMS (IAW FAR 32.806(a)(1)) 52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (IAW FAR 32.706-3) 52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS (IAW FAR 32.009-2) 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (IAW DFARS 232.7004(b), PGI 232.7004(b)(1), DFARS 212.301(f)(liii)) (a) Definitions. As used in this clause- "Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization. "Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF). "Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system. (b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. (c) WAWF access. To access WAWF, the Contractor shall- (1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov ; and (2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site. (d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/. (e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol. (f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order: (1) Document type. The Contractor shall use the following document type(s). RECEIVING REPORT REQUIRED (Contracting Officer: Insert applicable document type(s). Note: If a "Combo" document type is identified but not supportable by the Contractor's business systems, an "Invoice" (stand-alone) and "Receiving Report" (stand-alone) document type may be used instead.) (2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer. IAW CLIN DETAILS (Contracting Officer: Insert inspection and acceptance locations or "Not applicable.") (3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system. Routing Data Table* Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC HQ0337 Issue By DoDAAC FA8213 Admin DoDAAC N/A Inspect By DoDAAC FV2019 Ship To Code FV2019 Ship From Code N/A Mark For Code USAF APF Service Approver (DoDAAC) N/A Service Acceptor (DoDAAC) N/A Accept at Other DoDAAC N/A LPO DoDAAC N/A DCAA Auditor DoDAAC N/A Other DoDAAC(s) N/A (*Contracting Officer: Insert applicable DoDAAC information or "See schedule" if multiple ship to/acceptance locations apply, or "Not applicable.") (4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, ( e.g. timesheets) in support of each payment request. (5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the "Send Additional Email Notifications" field of WAWF once a document is submitted in the system. MSgt Corey B. Kennedy, corey.kennedy@us.af.mil TSgt Vincent Lemau, Vincent.lemau@us.af.mil 505CBSS.APF@us.af.mil (Contracting Officer: Insert applicable email addresses or "Not applicable.") (g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact. _______________________________________________________________ (Contracting Officer: Insert applicable information or "Not applicable.") (2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988. (The above Clause/Provision has been modified.) ACCOUNTING AND APPROPRIATION DATA Accounting and Appropriation Chargeable ACRN Funds Citation Amount Chargeable AA PSR: G54160 FSR: 032876 DSR: 149004 REFERENCE: AA FD2020-16-50834 ACRN TOTAL $ 0.00 52.242-13 BANKRUPTCY (IAW FAR 42.903) 52.242-17 GOVERNMENT DELAY OF WORK (IAW FAR 42.1305(c)) 52.243-1 CHANGES--FIXED-PRICE (IAW FAR 43.205(a)(1)) (a) The Contracting Officer may at any time, by written order, and without notice to the sureties, if any, make changes within the general scope of this contract in any one or more of the following: (1) Drawings, designs, or specifications when the supplies to be furnished are to be specially manufactured for the Government in accordance with the drawings, designs, or specifications. (2) Method of shipment or packing. (3) Place of delivery. (b) If any such change causes an increase or decrease in the cost of, or the time required for, performance of any part of the work under this contract, whether or not changed by the order, the Contracting Officer shall make an equitable adjustment in the contract price, the delivery schedule, or both, and shall modify the contract. (c) The Contractor must assert its right to an adjustment under this clause within 30 days from the date of receipt of the written order. However, if the Contracting Officer decides that the facts justify it, the Contracting Officer may receive and act upon a proposal submitted before final payment of the contract. (d) If the Contractor's proposal includes the cost of property made obsolete or excess by the change, the Contracting Officer shall have the right to prescribe the manner of the disposition of the property. (e) Failure to agree to any adjustment shall be a dispute under the Disputes clause. However, nothing in this clause shall excuse the Contractor from proceeding with the contract as changed. (The above Clause/Provision has been modified.) 252.243-7001 PRICING OF CONTRACT MODIFICATIONS (IAW DFARS 243.205-70) 52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE (IAW FAR 46.302) 52.246-16 RESPONSIBILITY FOR SUPPLIES (IAW FAR 46.316) 52.246-23 LIMITATION OF LIABILITY (IAW FAR 46.805(a)(1)) 252.246-7000 MATERIAL INSPECTION AND RECEIVING REPORT (IAW DFARS 246.370) INSPECTION AND ACCEPTANCE (IAW FAR 46.401(b), FAR 46.503) Government Contract Quality Assurance Inspection and Acceptance will be at (Final): [CONTRACTOR FILL-IN] Item No(s): See schedule for items with the following code(s) listed below : Inspection Code and Address: Government Contract Quality Assurance Inspection and Acceptance will be at destination(s) specified herein (Final). Item No(s): 0002 (The above Clause/Provision has been modified.) 52.247-1 COMMERCIAL BILL OF LADING NOTATIONS (IAW FAR 47.104-4(a), FAR 47.104-4(b)) 52.247-34 F.O.B. DESTINATION (IAW FAR 47.303-6(c)) 52.247-48 F.O.B. DESTINATION--EVIDENCE OF SHIPMENT (IAW FAR 47.305-4(c)) (a) If this contract is awarded on a free on board (f.o.b.) destination basis, the Contractor-- (1) Shall not submit an invoice for payment until the supplies covered by the invoice have been shipped to the destination; and (2) Shall retain, and make available to the Government for review as necessary, the following evidence of shipment documentation for a period of 3 years after final payment under the contract: (i) If transportation is accomplished by common carrier, a signed copy of the commercial bill of lading for the supplies covered by the Contractor's invoice, indicating the carrier's intent to ship the supplies to the destination specified in the contract (ii) If transportation is accomplished by parcel post, a copy of the certificate of mailing. (iii) If transportation is accomplished by other than common carrier or parcel post, a copy of the delivery document showing receipt at the destination specified in the contract. (b) The Contractor is not required to submit evidence of shipment documentation with its invoice. Applicable Item No(s) 0001 0002 (The above Clause/Provision has been modified.) 52.247-58 LOADING, BLOCKING, AND BRACING OF FREIGHT CAR SHIPMENTS (IAW FAR 47.305-15(a)(2)) 52.247-68 REPORT OF SHIPMENT (REPSHIP) (IAW FAR 47.208-2) (a) Definition. Domestic destination, as used in this clause, means-- (1) A destination within the contiguous United States; or (2) If shipment originates in Alaska or Hawaii, a destination in Alaska or Hawaii, respectively. (b) Unless otherwise directed by the Contracting Officer, the Contractor shall-- (1) Send a prepaid notice of shipment to the consignee transportation officer-- (i) For all shipments of-- (A) Classified material, protected sensitive, and protected controlled material; (B) Explosives and poisons, class 1, division 1.1, 1.2 and 1.3; class 2, division 2.3 and class 6, division 6.1; (C) Radioactive materials requiring the use of a III bar label; or (ii) When a truckload/carload shipment of supplies weighing 20,000 pounds or more, or a shipment of less weight that occupies the full visible capacity of a railway car or motor vehicle, is given to any carrier (common, contract, or private) for transportation to a domestic destination (other than a port for export); (2) Transmits the notice by rapid means to be received by the consignee transportation officer at least 24 hours before the arrival of the shipment; and (3) Send, to the receiving transportation officer, the bill of lading or letter or other document containing the following information and prominently identified as a "Report of Shipment" or "REPSHIP FOR T.O." COORDINATE: Coordinate all shipments to the Delivery Address (MOTSU) Point of Contact (POC) for receipt and acceptance at least 48 hours before delivery with: AMMUNITION SURVEILLANCE, MR. JIMMY SHIELDS, COMMERCIAL: 910-457-5644/8641 INFO: GACP TRANSPORTATION, HILL AFB UT (AFLCMC/EBHMB) email: ooalc.gacp.transportation@us.af.mil or FAX (801) 777-1089. INFO: GACP APF TEAM, HILL AFB UT (AFLCMC/EBHMA) Primary: MSgt Corey B. Kennedy, 801-777-9411, corey.kennedy@us.af.mil. Alternate: TSgt Vincent P. Lemau, 801-586-5211, vincent.lemau@us.af.mil. INFO: HILL AFB APF MANAGEMENT TEAM: 505CBSS.APF@US.AF.MIL. 16. Shipment Date written as a three-digit day of the year (Julian) 17. Origin Locations/Address 18. Intended Destination/Delivery Address 19. Estimated Time of Arrival (ETA) written as a three-digit day of the year (Julian) (Observe Standard Transit Time (STT), if CONUS Truck Shipment and no Required Delivery Date (RDD) identified) 20. Required Delivery Date (RDD) 21. Carrier 22. Bill of Lading (BL) Number (Notes 1, 2) 23. Shipment (Cargo) Name (Example: ISO Containers) 24. ISO Container Serial Number (AFU#) and Seal Number (if applicable): 25. Container Transportation Control Number (TCN) 26. TotalWeight of Contents 27. Quantity (Each), Pieces, Weight, Cube, and Condition Status (Note 2) 28. Mark all shipped Assets for: "FV2190 (USAF APF)" 29. Name, address, and phone number of person responsible for information contained in the REPSHIP NOTES: 12. When the conveyance contains more than one shipment unit, repeat the data elements in separately lettered paragraphs for each shipment unit. 13. A separate REPSHIP is used for each mode of shipment to the destination. SUBJ: Report of Shipment (REPSHIP) FROM: To: Contract Vendor Origin Military Ocean Terminal Sunny Point (MOTSU), 596 Transportation Brigade, 6280 Sunny Point Road, Southport, NC 28461 (The above Clause/Provision has been modified.) 52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (IAW FAR 52.107(f)) (a) The use in this contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause. (b) The use in this contract of any Defense Federal Acquisition Regulation Supplement (48 CFR Chapter 2 LIST OF DOCUMENTS, EXHIBITS OR ATTACHMENTS Form Number Description/File Name Date Number of Pages N/A Attachment_1_Product_Description.docx 15DEC2015 8 SOLICITATION PROVISIONS REPRESENTATIONS, INSTRUCTIONS AND EVALUATIONS 252.203-7005 REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (NOV 2011) (IAW DFARS 203.171-4(b), DFARS 212.301(f)(iv)) 52.204-8 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (IAW FAR 4.1202(a)) (a)(1) The North American Industry Classification System (NAICS) code for this acquisition is 332439. (2) The small business size standard is 500. (3) The small business size standard for a concern which submits an offer in its own name, other than on a construction or service contract, but which proposes to furnish a product which it did not itself manufacture, is 500 employees. (b)(1) If the provision at 52.204-7, System for Award Management, is included in this solicitation, paragraph (d) of this provision applies. (2) If the provision at 52.204-7 is not included in this solicitation, and the offeror is currently registered in the System for Award Management (SAM), and has completed the Representations and Certifications section of SAM electronically, the offeror may choose to use paragraph (d) of this provision instead of completing the corresponding individual representations and certifications in the solicitation. The offeror shall indicate which option applies by checking one of the following boxes: [ ] [ ] certifications in the solicitation. (c) (1) The following representations or certifications in SAM are applicable to this solicitation as indicated: (i) 52.203-2, Certificate of Independent Price Determination. This provision applies to solicitations when a firm-fixed-price contract or fixed-price contract with economic price adjustment is contemplated, unless- (A) The acquisition is to be made under the simplified acquisition procedures in Part 13; (B) The solicitation is a request for technical proposals under two-step sealed bidding procedures; or (C) The solicitation is for utility services for which rates are set by law or regulation. (ii) 52.203-11, Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions. This provision applies to solicitations expected to exceed $150,000. (iii) 52.204-3, Taxpayer Identification. This provision applies to solicitations that do not include the provision at 52.204-7, System for Award Management. (iv) 52.204-5, Women-Owned Business (Other Than Small Business). This provision applies to solicitations that- (A) Are not set aside for small business concerns; (B) Exceed the simplified acquisition threshold; and (C) Are for contracts that will be performed in the United States or its outlying areas. (v) 52.209-2, Prohibition on Contracting with Inverted Domestic Corporations-Representation. (vi) 52.209-5, Certification Regarding Responsibility Matters. This provision applies to solicitations where the contract value is expected to exceed the simplified acquisition threshold. (vii) 52.214-14, Place of Performance--Sealed Bidding. This provision applies to invitations for bids except those in which the place of performance is specified by the Government. (viii) 52.215-6, Place of Performance. This provision applies to solicitations unless the place of performance is specified by the Government. (ix) 52.219-1, Small Business Program Representations (Basic & Alternate I). This provision applies to solicitations when the contract will be performed in the United States or its outlying areas. (A) The basic provision applies when the solicitations are issued by other than DoD, NASA, and the Coast Guard. (B) The provision with its Alternate I applies to solicitations issued by DoD, NASA, or the Coast Guard. (x) 52.219-2, Equal Low Bids. This provision applies to solicitations when contracting by sealed bidding and the contract will be performed in the United States or its outlying areas. (xi) 52.222-22, Previous Contracts and Compliance Reports. This provision applies to solicitations that include the clause at 52.222-26, Equal Opportunity. (xii) 52.222-25, Affirmative Action Compliance. This provision applies to solicitations, other than those for construction, when the solicitation includes the clause at 52.222-26, Equal Opportunity. (xiii) 52.222-38, Compliance with Veterans' Employment Reporting Requirements. This provision applies to solicitations when it is anticipated the contract award will exceed the simplified acquisition threshold and the contract is not for acquisition of commercial items. (xiv) 52.223-1, Biobased Product Certification. This provision applies to solicitations that require the delivery or specify the use of USDA-designated items; or include the clause at 52.223-2, Affirmative Procurement of Biobased Products Under Service and Construction Contracts. (xv) 52.223-4, Recovered Material Certification. This provision applies to solicitations that are for, or specify the use of, EPA- designated items. (xvi) 52.225-2, Buy American Certificate. This provision applies to solicitations containing the clause at 52.225-1. (xvii) 52.225-4, Buy American--Free Trade Agreements--Israeli Trade Act Certificate. (Basic, Alternate I, II, and III) This provision applies to solicitations containing the clause at 52.225- 3. (A) If the acquisition value is less than $25,000, the basic provision applies. (B) If the acquisition value is $25,000 or more but is less than $50,000, the provision with its Alternate I applies. (C) If the acquisition value is $50,000 or more but is less than $77,533, the provision with its Alternate II applies. (D) If the acquisition value is $77,533 or more but its less than $100,000, the provision with its Alternate III applies. (xviii) 52.225-6, Trade Agreements Certificate. This provision applies to solicitations containing the clause at 52.225-5. (xix) 52.225-20, Prohibition on Conducting Restricted Business Operations in Sudan--Certification. This provision applies to all solicitations. (xx) 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transaction Relating to Iran-Representation and Certifications. This provision applies to all solicitations. (xxi) 52.226-2, Historically Black College or University and Minority Institution Representation. This provision applies to solicitations for research, studies, supplies, or services of the type normally acquired from higher educational institutions. (2) The following representations or certifications are applicable as indicated by the Contracting Officer: [Contracting Officer check as appropriate.] X __ X __ (see note) Contracts for Maintenance, Calibration, or Repair of Certain Equipment -- Certification. ). ( Note: If this ) clause is applicable it will be listed in the appropriate clause section of this document. __ (iv) 52.222-52 Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Certification. (see note) EPA-Designated Products (Alternate I only). ( Note: If this clause and it's Alternate I are applicable they ) will be listed in the appropriate clause section of this document. (vi) 52.227-6, Royalty Information. __ _ __ (d) The offeror has completed the annual representations and certifications electronically via the SAM Web site accessed through https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in paragraph (c) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201); except for the changes identified below [offeror to insert changes, identifying change by clause. These amended representation(s) and/or certification(s) are also incorporated in this offer and number, title, date] are current, accurate, and complete as of the date of this offer. FAR Clause # Title Date Change Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on SAM. 252.204-7007 ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (IAW DFARS 204.1202) Substitute the following paragraphs (d) and (e) for paragraph (d) of the provision at FAR 52.204-8: (d) (1) The following representations or certifications in the System for Award Management (SAM) database are applicable to this solicitation as indicated: (i) 252.209-7003, Reserve Officer Training Corps and Military Recruiting on Campus--Representation. Applies to all solicitations with institutions of higher education. (ii) 252.216-7008, Economic Price Adjustment--Wage Rates or Material Prices Controlled by a Foreign Government--Representation. Applies to solicitations for fixed-price supply and service contracts when the contract is to be performed wholly or in part in a foreign country, and a foreign government controls wage rates or material prices and may during contract performance impose a mandatory change in wages or prices of materials. (iii) 252.222-7007, Representation Regarding Combating Trafficking in persons, as prescribed in 222.1771. Applies to solicitations with a value expected to exceed the simplified acquisition threshold. (iv) 252.225-7042, Authorization to Perform. Applies to all solicitations when performance will be wholly or in part in a foreign country. (v) 252.225-7049, Prohibition on Acquisition of Commercial Satellite Services from Certain Foreign Entities-Representation. Applies to solicitations for the acquisition of commercial satellite services. (vi) 252.225-7050, Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism. Applies to all solicitations expected to result in contracts of $150,000 or more. (vii) 252.229-7012, Tax Exemptions (Italy)--Representation. Applies to solicitations when contract performance will be in Italy. (viii) 252.229-7013, Tax Exemptions (Spain)--Representation. Applies to solicitations when contract performance will be in Spain. (ix) 252.247-7022, Representation of Extent of Transportation by Sea. Applies to all solicitations except those for direct purchase of ocean transportation services or those with an anticipated value at or below the simplified acquisition threshold. (2) The following representations or certifications in SAM are applicable to this solicitation as indicated by the Contracting Officer; [ Contracting Officer check as appropriate. ] __ _ (i) 252.209-7002, Disclosure of Ownership or Control by a Foreign Government. __ _ (ii) 252.225-7000, Buy American -Balance of Payments Program Certificate. __ _ (iii) 252.225-7020, Trade Agreements Certificate. __ _ Use with Alternate I __ _ (iv) 252.225-7031, Secondary Arab Boycott of Israel. __ _ (v) 252.225-7035, Buy American -Free Trade Agreements-Balance of Payments Program Certificate. __ _ Use with Alternate I. __ _ Use with Alternate II. __ _ Use with Alternate III. __ _ Use with Alternate IV. __ _ Use with Alternate V. (e) The offeror has completed the annual representations and certifications electronically via the SAM website at https://acquisition.gov/. After reviewing the ORCA database information, the offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in FAR 52.204-8© and paragraph (d) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer, and are incorporated in this offer by reference (see FAR 4.1201); except for the changes identified below [ offeror to insert changes, identifying ]. These amended representation(s) and/or certification(s) are also change by provision number, title, date incorporated in this offer and are current, accurate, and complete as of the date of this offer. FAR/DFARS Provision# Title Date Change Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications located in the SAM database. (The above Clause/Provision has been modified.) 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (NOV 2015) (IAW FAR 12.301(b)(2)) An offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certificates electronically via http://www.acquisition.gov. If an offeror has not completed the annual representations and certifications electronically at the System for Award Management (SAM) website, the offeror shall complete only paragraphs (c) through (o) of this provision. (a) Definitions. As used in this provision- "Economically disadvantage women-owned small business (EDWOSB) concern" that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program. "Forced or indentured child labor " (1) Extracted from any person under the age of 18 under the menace of penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. "Highest-level owner" controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner. "Immediate owner" include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees. "Inverted domestic corporation" corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). "Manufactured end product" (1) PSC 5510, Lumber and Related Basic Wood Materials; (2) Product or Service Group (PSG) 87, Agricultural Supplies; (3) PSG 88, Live Animals; (4) PSG 89, Subsistence; (5) PSC 9410, Crude Grades of Plant Materials; (6) PSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) PSC 9610, Ores; (9) PSC 9620, Minerals, Natural and Synthetic; and (10) PSC 9630, Additive Metal Materials. "Place of manufacture" or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. "Restricted business operations" mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate- (1) Are conducted under contract directly and exclusively with the regional government of southern Sudan; (2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan; (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or (6) Have been voluntarily suspended. " Sensitive technology" - (1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically-- (i) To restrict the free flow of unbiased information in Iran; or (ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and (2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)). "Service-disabled veteran-owned small business concern" (1) Means a small business concern-- (i) Not less than 51 percent of which is owned by one or more service--disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran. (2) "Service-disabled veteran" means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). "Small business concern" dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation. " Small disadvantaged business concern, consistent with 13 CFR 124.1002," means a small business concern under the size standard applicable to the acquisition, that-- (1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by-- (i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and (ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and (2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition. "Subsidiary" (1) Directly by a parent corporation; or (2) Through another subsidiary of a parent corporation. "Veteran-owned small business concern" (1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and (2) The management and daily business operations of which are controlled by one or more veterans. "Women-owned business concern" in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women. "Women-owned small business concern" (1) That is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and (2) Whose management and daily business operations are controlled by one or more women. "Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127)," management and daily business operations of which are controlled by, one or more women who are citizens of the United States. (b)(1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the SAM website. (2) The offeror has completed the annual representations and certification electronically via the SAM website accessed through http://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ____________. [Offeror to identify the applicable paragraphs at (c) through (p) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.] (c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply. (1) Small business concern. The offeror represents as part of its offer that it [ ] is, [ ] is not a small business concern. (2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small The offeror represents as part of its offer that it [ ] a veteran-owned small business concern. business concern in paragraph (c)(1) of this provision.] is, [ ] is not (3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself The offeror represents as as a veteran-owned small business concern in paragraph (c)(2) of this provision.] part of its offer that it [ ] is, [ ] is not a service-disabled veteran-owned small business concern. (4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small The offeror represents that it [ ] is, [ ] is not a business concern in paragraph (c)(1) of this provision.] small disadvantaged business concern as defined in 13 CFR 124.1002. (5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [ ] is, [ ] is not a women-owned small business concern. Note: acquisition threshold. (6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a The offeror represents that- women-owned small business concern in paragraph (c)(5) of this provision.] (i) It [ ] is, [ ] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the Each WOSB concern name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: ______________.] eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation. (7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that- (i) It [ ] is, [ ] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the Each EDWOSB concern participating in the joint venture shall submit a EDWOSB concern and other small businesses that are participating in the joint venture: ______________.] separate signed copy of the EDWOSB representation. (8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a The offeror represents that it [ ] is a women-owned business concern. women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] (9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price: ______________________________________________________ (10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business The offeror represents, as part of its offer, that- concern in paragraph (c)(1) of this provision.] (i) It [ ] is, [ ] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR part 126; and (ii) It [ ] is, [ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall Each HUBZone small business concern participating in the enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: ____________.] HUBZone joint venture shall submit a separate signed copy of the HUBZone representation. (d) Representations required to implement provisions of Executive Order 11246-- (1) Previous Contracts and Compliance. The offeror represents that-- (i) It [ ] has, [ ] has not participated in a previous contract or subcontract subject either to the Equal Opportunity clause of this solicitation; and (ii) It [ ] has, [ ] has not filed all required compliance reports. (2) Affirmative Action Compliance. The offeror represents that-- (i) It [ ] has developed and has on file, [ ] has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60-2), or (ii) It [ ] has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor. (e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payment of reasonable compensation were made. (f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American--Supplies, is included in this solicitation.) (1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product," The terms "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Supplies." (2) Foreign End Products: Line Item No. Country Of Origin _______________ __________________ _______________ __________________ [List as necessary] (3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (g) (1) Buy American--Free Trade Agreements-Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms "Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." (ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American--Free Trade Agreements--Israeli Trade Act": Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products: Line Item No. Country Of Origin _______________ __________________ _______________ __________________ [List as necessary] (iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) of this provision) as defined in the clause of this solicitation entitled "Buy American--Free Trade Agreements--Israeli Trade Act." The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." Other Foreign End Products: Line Item No. Country Of Origin _______________ __________________ _______________ __________________ [List as necessary] (iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (2) Buy American--Free Trade Agreements--Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g) (1) (ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled "Buy American--Free Trade Agreements--Israeli Trade Act": (ii) Canadian End Products: Line Item No. _______________ _______________ [List as necessary] (3) Buy American--Free Trade Agreements--Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g) (1) (ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled "Buy American--Free Trade Agreements--Israeli Trade Act": Canadian or Israeli End Products: Line Item No. Country Of Origin _______________ __________________ _______________ __________________ [List as necessary] (4) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g) (1) (ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American--Free Trade Agreements--Israeli Trade Act": Free Trade Agreement Country End Products (Other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products: Line Item No. Country Of Origin _______________ __________________ _______________ __________________ [List as necessary] (5) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled "Trade Agreements." (ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products. Other End Products: Line Item No. Country Of Origin _______________ __________________ _______________ __________________ [List as necessary] (iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American statute. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation. (h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals- (1) [ ] Are, [ ] are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency; (2) [ ] Have, [ ] have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: Commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or Commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating criminal tax laws, or receiving stolen property; (3) [ ] Are, [ ] are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and (4) [ ] Have, [ ] have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,500 for which the liability remains unsatisfied. (i) Taxes are considered delinquent if both of the following criteria apply: (A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted. (B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded. (ii) Examples. (A) The taxpayer has received a statutory notice of deficiency, under I.R.C. section 6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appear rights. (B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. section 6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals Contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (C) The taxpayer has entered into an installment agreement pursuant to I.R.C. section 6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment. (D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. section 362 (the Bankruptcy Code). (i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). [The Contracting Officer must list in paragraph (j)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor; unless excluded at 22.1503(b).] (1) Listed End Products. Listed End Product Listed Countries of Origin _______________ __________________ _______________ __________________ (2) Certification. [If the Contracting Officer has identified end products and countries of origin in paragraph (j)(1) of this provision, then the offeror must certify to either (j)(2)(i) or (j)(2)(ii) by checking the appropriate block.] [ ] was mined, produced, or manufactured in the corresponding country as listed for that product. [ ] mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that is has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor. (j) Place of Manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly- (1) [ ] In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) [ ] Outside the United States. (k) Certificates regarding exemptions from the application of the Service Contract Labor Standards. (Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.) (1) [ ] Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1). The offeror [ ] does [ ] does not certify that- (i) The items of equipment to be serviced under this contract are used regularly for other than Governmental purposes and are sold or traded by the offeror (or subcontractor in the case of an exempt subcontract) in substantial quantities to the general public in the course of normal business operations; (ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for the maintenance, calibration, or repair of such equipment; and (iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and equivalent employees servicing the same equipment of commercial customers. (2) [ ] Certain services as described in FAR 22.1003-4(d)(1). The offeror [ ] does [ ] does not certify that- (i) The services under the contract are offered and sold regularly to non-Governmental customers, and are provided by the offeror (or subcontractor in the case of an exempt subcontract) to the general public in substantial quantities in the course of normal business operations; (ii) The contract services will be furnished at prices that are, or are based on, established catalog or market prices (see FAR 22.1003-4(d)(2)(iii)); (iii) Each service employee who will perform the services under the contract will spend only a small portion of his or her time (a monthly average of less than 20 percent of the available hours on an annualized basis, or less than 20 percent of available hours during the contract period if the contract period is less than a month) servicing the Government contract; and (iv) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract is the same as that used for these employees and equivalent employees servicing commercial customers. (3) If paragraph (k)(1) or (k)(2) of this clause applies- (i) If the offeror does not certify to the conditions in paragraph (k)(1) or (k)(2) and the Contracting Officer did not attach a Service Contract Labor Standards wage determination to the solicitation, the offeror shall notify the Contracting Officer as soon as possible; and (ii) The Contracting Officer may not make an award to the offeror if the offeror fails to execute the certification in paragraph (k)(1) or (k)(2) of this clause or to contact the Contracting Officer as required in paragraph (k)(3)(i) of this clause. (l) Taxpayer Identification Number (TIN) (26 U.S.C. 6109, 31 U.S.C. 7701). (Not applicable if the offeror is required to provide this information to the SAM database to be eligible for award.) (1) All offerors must submit the information required in paragraphs (l)(3) through (l)(5) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the Internal Revenue Service (IRS). (2) The TIN may be used by the Government to collect and report on any delinquent amounts arising out of the offeror's relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror's TIN. (3) Taxpayer Identification Number (TIN). [ ] [ ] [ ] [ ] income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States; [ ] [ ] (4) Type of organization. Sole proprietorship; [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] (5) Common parent. Offeror is not owned or controlled by a common parent; [ ] [ ] Name___________________________________________ TIN_____________________________________________ (m) Restricted business operations in Sudan. By submission of its offer, the offeror certifies that the offeror does not conduct any restricted business operations in Sudan. (n) Prohibition on Contracting with Inverted Domestic Corporations. (1) Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with either an inverted domestic corporation, or a subsidiary of an inverted domestic corporation, unless the exception at 9.108-2(b) applies or the requirement is waived in accordance with the procedures at 9.108-4. (2) Representation. By submission of its offer, the offeror represents that- (i) It [ ] is, [ ] is not an inverted domestic corporation; and (ii) It [ ] is, [ ] is not a subsidiary of an inverted domestic corporation. (o) Prohibition on contracting with entities engaging in certain activities or transactions relating to Iran. (1) The offeror shall email questions concerning sensitive technology to the Department of State at CISADA106@state.gov. (2) Representation and Certification. Unless a waiver is granted or an exception applies as provided in paragraph (o)(3) of this provision, by submission of its offer, the offeror- (i) Represents, to the best of its knowledge and belief, that the offeror does not export any sensitive technology to thegovernment of Iran or any entities or individuals owned or controlled by, or acting on behalf or at the direction of, the government of Iran; (ii) Certifies that the offeror, or any person owned or controlled by the offeror, does not engage in any activities for which sanctions may be imposed under section 5 of the Iran Sanctions Act; and (iii) Certifies that the offeror, and any person owned or controlled by the offeror, does not knowingly engage in any transaction that exceeds $3,500 with Iran's Revolutionary Guard Corps or any of its officials, agents, or affiliates, the property and interests in property of which are blocked pursuant to the International Emergency Economic Powers Act (50(U.S.C. 1701 et seq.) (see OFAC's Specially Designated Nationals and Blocked Persons List at http://www.treasury.gov/ofac/downloads/t11sdn.pdf ). (3) The representation and certification requirements of paragraph (o)(2) of this provision do not apply if- (i) This solicitation includes a trade agreements certification (e.g., 52.212-3(g) or a comparable agency provision); and (ii) The offeror has certified that all the offered products to be supplied are designated country end products. (p) Ownership or Control of Offeror. (Applies in all solicitations when there is a requirement to be registered in SAM or a requirement to have a DUNS Number in the solicitation. (1) The Offeror represents that it [ ] has or [ ] does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (2) and if applicable, paragraph (3) of this provision for each participant in the joint venture. (2) If the Offeror indicates "has" in paragraph (p)(1) of this provision, enter the following information: Immediate owner CAGE code:_____________________________________________ Immediate owner legal name:______________________________________________ (Do not use a "doing business as" name) Is the immediate owner owned or controlled by another entity: [ ] (3) If the Offeror indicates "yes" in paragraph (p)(2) of this provision, indicating that the immediate owner is owned or controlled by another entity, then enter the following information: Highest level owner CAGE code:_____________________________________________ Highest level owner legal name:______________________________________________ (Do not use a "doing business as" name) ADDENDUM TO PROVISION 52.212-1 252.203-7996 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS--REPRESENTATION (DEVIATION 2016-O0003) (IAW DARS Tracking # 2016-O0003) (a) In accordance with section 101(a) of the Continuing Appropriations Act, 2016 (Pub. L. 114-53) and any subsequent FY 2016 appropriations act that extends to FY 2016 funds the same restrictions as are contained in section 743 of division E, title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), none of the funds appropriated (or otherwise made available) by this or any other Act may be used for a contract with an entity that requires employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (b) The prohibition in paragraph (a) of this provision does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (c) Representation. By submission of its offer, the Offeror represents that it does not require employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. 52.204-7 SYSTEM FOR AWARD MANAGEMENT (IAW FAR 4.1105(a)(1)) 52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (IAW FAR 4.1804(a), FAR 12.301(d)) 252.204-7004 ALTERNATE A, SYSTEM FOR AWARD MANAGEMENT (IAW DFARS 204.1105) 252.204-7008 COMPLIANCE WITH SAFEGUARDING COVERED DEFENSE INFORMATION CONTROLS (IAW DFARS 204.7304(a)) 52.207-4 ECONOMIC PURCHASE QUANTITY--SUPPLIES (IAW FAR 7.203) (a) Offerors are invited to state an opinion on whether the quantity(ies) of supplies on which bids, proposals or quotes are requested in this solicitation is (are) economically advantageous to the Government. (b) Each offeror who believes that acquisitions in different quantities would be more advantageous is invited to recommend an economic purchase quantity. If different quantities are recommended, a total and a unit price must be quoted for applicable items. An economic purchase quantity is that quantity at which a significant price break occurs. If there are significant price breaks at different quantity points, this information is desired as well. OFFEROR RECOMMENDATIONS ITEM QUANTITY QUOTATION PRICE TOTAL (c) The information requested in this provision is being solicited to avoid acquisitions in disadvantageous quantities and to assist the Government in developing a data base for future acquisitions of these items. However, the Government reserves the right to amend or cancel the solicitation and re-solicit with respect to any individual item in the event quotations received and the Government's requirements indicate that different quantities should be acquired. 52.209-7 INFORMATION REGARDING RESPONSIBILITY MATTERS (IAW FAR 9.104-7(b)) (a) Definitions. As used in this provision- "Administrative proceeding" means a non-judicial process that is adjudicatory in nature in order to make a determination of fault or liability ( e.g., Securities and Exchange Commission Administrative Proceedings, Civilian Board of Contract Appeals Proceedings, and Armed Services Board of Contract Appeals Proceedings). This includes administrative proceeding at the Federal and State level but only in connection with performance of a Federal contract or grant. It does not include agency actions such as contract audits, site visits, corrective plans, or inspection of deliverables. "Federal contracts and grants with total value greater than $10,000,000" means- (1) The total value of all current, active contracts and grants, including all priced options; and (2) The total value of all current, active orders including all priced options under indefinite-delivery, indefinite-quantity, 8(a), or requirements contracts (including task and delivery and multiple-award Schedules). "Principal" means an officer, director, owner, partner, or a person having primary management or supervisory responsibilities within a business entity ( e.g., general manager; plant manager; head of a division or business segment; and similar positions). (b) The offeror [_] has [_] does not have current active Federal contracts and grants with total value greater than $10,000,000. (c) If the offeror checked "has" in paragraph (b) of this provision, the offeror represents, by submission of this offer, that the information it has entered in the Federal Awardee Performance and Integrity Information System (FAPIIS) is current, accurate, and complete as of the date of submission of this offer with regard to the following information: (1) Whether the offeror, and/or any of its principals, has or has not, within the last five years, in connection with the award to or performance by the offeror of a Federal contract or grant, been the subject of a proceeding, at the Federal or State level that resulted in any of the following dispositions: (i) In a criminal proceeding, a conviction. (ii) In a civil proceeding, a finding of fault and liability that results in the payment of a monetary fine, penalty, reimbursement, restitution, or damages of $5,000 or more. (iii) In an administrative proceeding, a finding of fault and liability that results in- (A) The payment of a monetary fine or penalty of $5,000 or more; or (B) The payment of a reimbursement, restitution, or damages in excess of $100,000. (iv) In a criminal, civil, or administrative proceeding, a disposition of the matter by consent or compromise with an acknowledgment of fault by the Contractor if the proceeding could have led to any of the outcomes specified in paragraphs (c)(1)(i), (c)(1)(ii), or (c)(1)(iii) of this provision. (2) If the offeror has been involved in the last five years in any of the occurrences listed in (c)(1) of this provision, whether the offeror has provided the requested information with regard to each occurrence. (d) The offeror shall post the information in paragraphs (c)(1)(i) through (c)(1)(iv) of this provision in FAPIIS as required through maintaining an active registration in the System for Award Management database via https://www.acquisition.gov (see 52.204-7). 252.209-7991 REPRESENTATION BY CORPORATIONS REGARDING AN UNPAID DELINQUENT TAX LIABILITY OR A FELONY CONVICTION UNDER ANY FEDERAL LAW--FISCAL YEAR 2016 APPROPRIATIONS (DEVIATION 2016-O0002) (IAW DARS Tracking # 2016-O0002) (a) In accordance with section 101(a) of the Continuing Appropriations Act, 2016 (Pub. L. 114-53) and any subsequent FY 2016 appropriations act that extends to FY 2016 funds the same restrictions as are contained in sections 744 and 745 of division E, title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), none of the funds made available by this or any other Act may be used to enter into a contract with any corporation that- (1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government; or (2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless the agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government. (b) The Offeror represents that- (1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, (2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months. 52.211-14 NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, AND ENERGY PROGRAM USE (IAW FAR 11.604(a)) Note: DX or DO rating will be completed on cover page. 52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS (IAW FAR 12.301(b)(1)) 252.213-7000 NOTICE TO PROSPECTIVE SUPPLIERS ON USE OF PAST PERFORMANCE INFORMATION RETRIEVAL SYSTEM--STATISTICAL REPORTING IN PAST PERFORMANCE EVALUATIONS (IAW FAR 213.106-2-70) THE FOLLOWING IS FILL-IN DATA FOR PROVISION 52.204-8 PARA (c)(2)(ii): 52.222-18 CERTIFICATION REGARDING KNOWLEDGE OF CHILD LABOR FOR LISTED END PRODUCTS (Mar 2011) (b) Listed End Products. Listed End Product See http://www.dol.gov/ilab/reports/child-labor/list-of-products/ for full list of excluded products and countries of origin. Listed Countries of Origin See http://www.dol.gov/ilab/reports/child-labor/list-of-products/ for full list of excluded products and countries of origin. (c) Certification. The Government will not make award to an offeror unless the offeror, by checking the appropriate block, certifies to either paragraph (c)(1) or paragraph (c)(2) of this provision. [ ] produced, or manufactured in a corresponding country as listed for that end product. [ ] produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that it has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture such end product. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor. (The above Clause/Provision has been modified.) 52.225-18 PLACE OF MANUFACTURE (IAW FAR 25.1101(f)) (a) Definitions. As used in this clause- "Manufactured end product" means any end product and service codes (PSCs) 1000-9999, except- (1) PSC 5510, Lumber and Related Basic Wood Materials; (2) Product Service Group (PSG) 87, Agricultural Supplies; (3) PSG 88, Live Animals; (4) PSG 89, Subsistence; (5) PSC 9410, Crude Grades of Plant Materials; (6) PSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) PSC 9610, Ores; (9) PSC 9620, Minerals, Natural and Synthetic; and (10) PSC 9630, Additive Metal Materials. "Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. (b) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly- (1) [ ] In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) [ ] Outside the United States. 52.233-2 SERVICE OF PROTEST (IAW FAR 33.106(a)) (a) Protests, as defined in section 33.101 of the Federal Acquisition Regulation, that are filed directly with an agency, and copies of any protests that are filed with the Government Accountability Office (GAO), shall be served on the Contracting Officer (addressed as follows) by obtaining written and dated acknowledgment of receipt from (See page. 1 Issuing Office) (b) The copy of any protest shall be received in the office designated above within one day of filing a protest with the GAO. 52.247-50 NO EVALUATION OF TRANSPORTATION COSTS (IAW FAR 47.305-5(c)(1)) 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (IAW FAR 52.107(a)) This solicitation incorporated one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The full text of a clause may be accessed electronically at this/these address(es): Regulations URLs: (Click on the appropriate regulation.) http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/far1toc.htm http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/dfars/dfar1toc.htm http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/af_afmc/affars/affar1toc.htm NOTE: desired regulation reference, using your browser's FIND function. When located, click on the regulation reference (hyperlink). 52.252-5 AUTHORIZED DEVIATIONS IN PROVISIONS (IAW FAR 52.107(e)) (a) The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the provision. (b) The use in this solicitation of any Defense Federal Acquisition Regulation Supplement (DFARS) (48 CFR Chapter 2 ) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (APR 1984) After selecting the appropriate regulation above, at the "Table of Contents" page conduct a search for the (FEB 1998) (APR 1984) (SEP 2006) (MAR 2015) (2) The offeror may supply an end product listed in paragraph (b) of this provision that was mined, (1) The offeror will not supply any end product listed in paragraph (b) of this provision that was mined, (JUN 2015) (OCT 2015) (APR 2008) (OCT 2015) (JUL 2013) (AUG 1987) (DEC 2015) (FEB 2014) (JUL 2015) (JUL 2013) (OCT 2015) Yes or [ ] No. Name and TIN of common parent: Other________________________________________ International organization per 26 CFR 1.6049-4; Foreign government; Government entity (Federal, State, or Local); Corporate entity (tax-exempt); Corporate entity (not tax-exempt); Partnership; Offeror is an agency or instrumentality of the Federal Government. Offeror is an agency or instrumentality of a foreign government; Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have TIN is not required because: TIN has been applied for. TIN:_________________________________________ (ii) The offeror may supply an end product listed in paragraph (j)(1) of this provision that was (i) The offeror will not supply any end product listed in paragraph (j)(1) of this provision that Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified means a small business concern that is at least 51 percent directly and unconditionally owned by, and the means a small business concern-- means a concern which is at least 51 percent owned by one or more women; or means a small business concern-- means an entity in which more than 50 percent of the entity is owned- means a concern, including its affiliates, that is independently owned and operated, not -- means business operations in Sudan that include power production activities, means the place where an end product is assembled out of components, or otherwise made means any end product and service codes (PSCs) 1000-9999, except- means a foreign incorporated entity that meets the definition of an inverted domestic means an entity, other than the offeror, that has direct control of the offeror. Indicators of control means the entity that owns or controls an immediate owner of the offeror, or that owns or means all work or service-- means a small business concern (JAN 2015) (vii) 52.227-15, Representation of Limited Rights Data and Restricted Computer Software. _ (B) Alternate I. (A) Basic. (v) 52.223-9, with its Alternate I, Estimate of Percentage of Recovered Material Content for (iii) 52.222-48, Exemption from Application of the Service Contract Labor Standards to (ii) 52.222-18, Certification Regarding Knowledge of Child Labor for Listed End Products. (i) 52.204-17, Ownership or Control of Offeror. (ii) Paragraph (d) does not apply and the offeror has completed the individual representations and (i) Paragraph (d) applies. (JAN 2016) ).clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (APR 1984) (FEB 2006) (APR 1984) (FEB 1999) (NOV 1991) (FEB 2006) (SEP 1999) (MAR 2008) (FEB 1997) (APR 1984) (AUG 1996) (DEC 1991) (AUG 1987) (APR 1984) (JUL 1995) CIN: F2DCAE5337B001 57 63400. 57 5 47 HN 4E27R4 020000 46502 28031F 503000 F2DCAE $0.00 (AUG 1998) (MAY 2013) (DEC 2013) (JUN 2013) (MAY 2014) (MAY 2014) (FEB 2013) (JUN 2013) (MAY 2001) (MAY 2015) (FEB 1998) (APR 2008) (JUN 1997) (AUG 2000) (SEP 1989) (DEC 2015) (APR 1992) (JUL 2015) (MAY 2011) (DEC 2008) (MAY 2014) (MAY 2014) (MAY 2014) (MAY 2014) (APR 1984) (NOV 2013) (NOV 2015) (APR 2014) (JUN 2013) (DEC 2012) (DEC 2006) (FEB 2013) (JUN 2013) (JAN 2016) (DEC 2013) (SEP 2011) A FV2019 None ; Yes Standard Inspection Receiving Report Required Destination Destination Other Than High Value Item R ROUTINE 8140-01-296-7241 None ; Yes Commercial Item Inspection Receiving Report Required Destination Origin Other Than High Value Item R ROUTINE 8140-01-296-7241
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OOALC/F2DCAE5337B001/listing.html)
Record: SN04020676-W 20160218/160216234348-4348dfc29e34759f563505f815ba261e (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

81 -- APF ISO CONTAINERS