SOLICITATION NOTICE
28 -- The Dalles Lock and Dam Project Turbine Headcovers and Associated Supplies
- Notice Date
- 2/8/2016
- Notice Type
- Presolicitation
- NAICS
- 332710
— Machine Shops
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, USACE District, Portland, Attn: CECT-NWP, PO Box 2946, Portland, Oregon, 97208-2946, United States
- ZIP Code
- 97208-2946
- Solicitation Number
- W9127N-16-R-0037
- Archive Date
- 5/31/2016
- Point of Contact
- Jeffrey S. Renner, Phone: (503) 808-4630
- E-Mail Address
-
jeff.s.renner@usace.army.mil
(jeff.s.renner@usace.army.mil)
- Small Business Set-Aside
- N/A
- Description
- This is a re-solicitation of the cancelled requirement W9127N-15-R-0046. On or about March 1, 2016 the US Army Corps of Engineers (USACE) Portland District intends to issue a solicitation for the purchase of two (2) turbine headcovers and associated supply items to be used with the turbine headcovers. The turbine headcover, also known as the sump plate, is the most interior stationary component of the headcover assembly. It mounts to the inner flange of the inner headcover with 48 fasteners and is located directly above the turbine runner. Its primary purpose is to keep water from entering the power house and help provide structural rigidity to the headcover assembly. The packing box and the oil sump are mounted to the headcover. The packing box is used to provide a water seal around the rotating shaft. The oil sump is an oil reservoir for lubrication of the turbine guide bearing. The following is the list of all items to be purchased: Two (2) Turbine Headcovers and Fasteners. Two (2) Oil Sumps and Fasteners. Twenty (20) Sump Plate Studs. Twenty (20) Nuts for Sump Plate Studs. Four (4) Packing Box Bolts. One Hundred and Six (106) Seal Ring Machine Screws. Two (2) Seal Ring Segment Sets. Two (2) Sets of Packing Box, Gland, Lantern, and Fasteners. The USACE will also reserve the right to exercise the following options items: Six (6) Turbine Headcovers and Fasteners. Six (6) Oil Sumps and Fasteners. Sixty (60) Sump Plate Studs. Sixty (60) Nuts for Sump Plate Studs. Twelve (12) Packing Box Bolts. Three hundred and eighteen (318) Seal Ring Machine Screws. Six (6) Seal Ring Segment Sets. Six (6) Sets of Packing Box, Gland, Lantern, and Fasteners. After issuance, solicitation and supporting documents will be made available on the Federal Business Opportunities website https://www.fbo.gov. The acquisition will be pursued in an Unrestricted, Full and Open competition. This opportunity is expected to result in a Lowest Price Technically Acceptable, Firm Fixed Price, Commercial Supply Contract Award. The NAICS Code for this solicitation is 332710-Machine Shops. The size standard is five hundred (500) employees. The federal supply code is 2830- Water Turbines. Point of Contact for small business questions or assistance is the Portland District Deputy for Small Business, Carol McIntyre at carol.a.mcintyre@usace.army.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA57/W9127N-16-R-0037/listing.html)
- Place of Performance
- Address: The Dalles Lock and Dam Project, I-84 Exit 88, The Dalles, Oregon, 97058-0564, United States
- Zip Code: 97058-0564
- Zip Code: 97058-0564
- Record
- SN04013582-W 20160210/160208234753-a9e061117c38c6c184fb0f4af1e914a0 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |