SOURCES SOUGHT
34 -- LOW SPEED CUTTING SAW
- Notice Date
- 1/5/2016
- Notice Type
- Sources Sought
- NAICS
- 332216
— Saw Blade and Handtool Manufacturing
- Contracting Office
- Department of the Army, Army Contracting Command, ACC - APG (W911QX) Adelphi, 2800 POWDER MILL RD, ADELPHI, Maryland, 20783-1197, United States
- ZIP Code
- 20783-1197
- Solicitation Number
- W911QX-16-T-0073
- Archive Date
- 1/26/2016
- Point of Contact
- Adrian Barber, Phone: 3013941503
- E-Mail Address
-
adrian.t.barber.civ@mail.mil
(adrian.t.barber.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- Sources Sought Instructions (1) Action Code : SOURCES SOUGHT This is a Sources Sought Notice only. This is not a request for proposal, but a survey to locate potential sources. This Sources Sought does not constitute an Invitation for Bids, Request for Proposals, or a Request for Quotations, and is not to be construed as a commitment by the Government to issue an order or otherwise pay for the information solicited, nor is it a guarantee of a forthcoming solicitation or contract. It is for market research purposes only. Respondents will not be notified of the results of the evaluation. The purpose of this Sources Sought Notice is to gain knowledge of interest, capabilities, and qualifications of various members of industry, to include the Small Business Community: Small Business, Section 8(a), Historically Underutilized Business Zones (HUB-Zone), Service-Disabled Veteran-Owned Small Business (SDVOSB), Women-Owned Small Business (WOSB), and Economically Disadvantaged Women-Owned Small Business (EDWOSB). The Government must ensure there is adequate competition among the potential pool of responsible contractors. Small business, Section 8(a), HUBZone, SDVOSB, WOSB, & EDWOSB businesses are highly encouraged to participate. (2) Date : 01/05/2015 (3) Classification Code : 34 (4) NAICS Code: 332216 (5) NAICS Size Standard: 500 employees (6) Contracting Office Address: 2800 Powder Mill Road Bldg. 601 Adelphi, Maryland 20783 (7) Subject: Sources Sought for Low Speed Cutting Saw (8) Proposed Solicitation Number: W911QX-16-T-0073 (9) Sources Sought Closing Response Date: 01/11/2016 (10) Contact Point: Adrian Barber, Contract Specialist, adrian.t.barber.civ@mail.mil 301-394-1503 (11) A. Objective: To find sources that are qualified to meet the supplies/services as listed in section 11B. Note that the specific requirements in section C are subject to change prior to the release of any solicitation. B. Salient Characteristics Low Speed Cutting Saw • 115V, 50/60 Hz, 1-phase • 10-500 RPM variable speed w/ LED display • Motor with a horsepower (HP) of 1/15 or greater • Precision micrometer accurate positioning of samples • Sliding weight assembly for adjustable load application • Gravity-fed cutting system • Minimum 2" diameter cutting capacity • Ability to handle blade diameters of 3-6" with a 1/2" arbor hole • Automatic shut-off sensor with adjustable stop • Removable splash guard • Removable catch screen • Removable coolant reservoir • Spring-loaded dressing stick attachment to enable dressing during sectioning • Touchpad switch controls for all functions C. Responses: All interested parties should notify this office in writing, mail, fax, or e-mail within the posted date. Responses shall include: (I) To what extent each of the specifications can be met. (II) Include your type of business (i.e. commercial, academia), whether your organization is classified as a large or small business based on the 500 employee size standard that accompanies NAICS code 332216. If a small business, you must also list any small disadvantaged status you hold [HUBZone, 8(a), Service Disabled Veteran Owned Small Business (SDVOSB), Women Owned Small Business (WOSB), Economically Disadvantaged Women-Owned Small Business (EDWOSB), etc.]. (III) Past experience/ performance through the description of completed projects. (12) Responses to this sources sought synopsis are due no later than 2359 (11:59 PM) eastern standard time 11 January 2016. Submissions should be emailed to Adrian Barber adrian.t.barber.civ@mail.mil. Questions concerning this sources sought synopsis may be directed to Adrian Barber at adrian.t.barber.civ@mail.mil or 301-394-1503. Please be advised that.zip and.exe files cannot be accepted. (13) Place of Contract Performance: Vendor's facility (14) Estimated Delivery Timeframe or Period of Performance: Three (3) weeks after date of award.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/98ee1980d73df8cf17cad2dc5ed77cad)
- Place of Performance
- Address: Vendor's facility, United States
- Record
- SN03982707-W 20160107/160105234308-98ee1980d73df8cf17cad2dc5ed77cad (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |