SOLICITATION NOTICE
61 -- Thermal Batteries
- Notice Date
- 12/2/2015
- Notice Type
- Presolicitation
- NAICS
- 335912
— Primary Battery Manufacturing
- Contracting Office
- Department of the Navy, Naval Air Systems Command, Naval Air Warfare Center Weapons Division Dept. 2, Commander, NAWCWD, Code 220000D, 429 E. Bowen Rd - Stop 4015, China Lake, California, 93555-6100, United States
- ZIP Code
- 93555-6100
- Solicitation Number
- N6893616R0003
- Archive Date
- 12/16/2016
- Point of Contact
- Christopher N. Bigelow, Phone: (760) 939-2530, Mary K Jacobs, Phone: (760) 939-6043
- E-Mail Address
-
christopher.bigelow@navy.mil, mary.jacobs@navy.mil
(christopher.bigelow@navy.mil, mary.jacobs@navy.mil)
- Small Business Set-Aside
- N/A
- Description
- NAVAIR intends to award a sole source Indefinite Delivery Indefinite Quantity contract with a five year ordering period based on FAR 6.302-1, Only One Responsible Source, to EaglePicher Technologies, LLC for a minimum quantity of 50 and maximum quantity of 500 thermal batteries that meet the requirements listed below. Key requirements are, but not limited to, the following bullet points: • Size = 2 in diameter X 2.25 in Length • Voltage Output = 25VDC to 32 VDC; Load = 3.25A base load with periodic additional 2.00A pulses; Rise Time = 0.330 sec max over all environments; Life = 67.5 seconds. • Maintenance = None over life of battery. • Weight = Max 1.0 lbs. • Temperature Range =operating -65F to +185F. • Operating Acceleration Environments = in accordance with specification AMX6099. • Non-operating Acceleration Environments = in accordance with specification AMX6099. • Activation Squib EP-250-1. • Materials (Case and Headers) = Type 304 Stainless Steel. Material (Terminals) = 52 Fe/Ni alloy hot solder dipped. • Safety = in accordance with MIL-STD-1385, S9310-AQ-SAF-010 and applicable electronic safety requirement of MIL-STD-454 requirement 1. Thermal Battery must pass application specific use reviewed by Government NAWCWD battery subject matter experts, NAWCWD System Safety, and the non-nuclear munitions safety board (NNMSB), as well as system level environmental qualification testing. Since the thermal battery is a critical subcomponent of an AN/DKT-89 telemeter, the thermal battery must be a form, fit, and function drop-in replacement for the current battery supplied by EaglePicher (Part Number EAP-12258A) as detailed in source control drawing 639AS11129. All responsible sources may submit a proposal, which shall be considered by the agency, no later than 16 December, 2015. Proposals will be emailed to Chris Bigelow at christopher.bigelow@navy.mil. All responsible sources must be registered in the System for Award Management (SAM) database at the following website: https://www.sam.gov/portal/public/SAM/.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVAIR/N68936D2/N6893616R0003/listing.html)
- Record
- SN03958501-W 20151204/151202234255-6cd881ccf0ca982bb1a1b87a51746015 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |