MODIFICATION
37 -- Soil Sampler - Solicitation 1
- Notice Date
- 9/15/2015
- Notice Type
- Modification/Amendment
- NAICS
- 333111
— Farm Machinery and Equipment Manufacturing
- Contracting Office
- Agricultural Research Service - Western Business Service Center
- ZIP Code
- 00000
- Solicitation Number
- AG-32SD-S-15-SR15
- Archive Date
- 10/10/2015
- Point of Contact
- Shannon N. Robbie, Phone: 970-492-7016
- E-Mail Address
-
Shannon.Robbie@ars.usda.gov
(Shannon.Robbie@ars.usda.gov)
- Small Business Set-Aside
- N/A
- Description
- RFQ AG-32SD-S-15-SR15 The USDA Agricultural Research Service Northern Great Plains Research Lab in Mandan, North Dakota is in need of one soil sampler per the specifications below. This is a Total Small Business Set Aside, only registered small businesses may submit a quote at this time. All vendors must be registered and active in the System for Award Management (SAM) at www.sam.gov. Please provide your company's DUNS # with your quote. Soil Sampler Specifications: • The sampler should be mountable on the bed of a Utility Vehicle (i.e. 6 wheeler) • The sampler should be a hydraulically-driven probe with >4,000 lbs down force and >2,500 lbs pull force. • The sampler should possess an engine with a capacity >20 HP. • The engine should have a starter and alternator (i.e., starts with the turn of a key). • The engine should have a 6 gallon gas tank and a 10 gallon oil reservoir. • The sampler should have a minimum stroke mast of 42", and the mast should swing laterally to allow for collection of multiple cores at a single location. • The stroke mast should recline forward into the bed of the UTV during transport between sampling locations. • The sampler should possess a rotary head, thereby allowing for the potential use of an auger. • The sampler should possess a hydraulic rotary tube cleaning brush. • The sampler should possess a 4-way leveling system. • The sampler should weight no more than 1,000 lbs. • Installation of sampler onto the bed of a Utility Vehicle should be included in the quote. • The sampler must be installed and ready for use. • Once the sampler is ready for pick up a brief training session should follow on the use of the machine. *Note that installation by be included; Research Location will haul the UTV there and back for install.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/da5b15deb8ac364ac5025fb97e67dae7)
- Place of Performance
- Address: USDA Agricultural Research Service, Northern Great Plains Research Lab, 1701 10th Avenue South West, Mandan, North Dakota, 58554, United States
- Zip Code: 58554
- Zip Code: 58554
- Record
- SN03886482-W 20150917/150915235833-da5b15deb8ac364ac5025fb97e67dae7 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |