SOLICITATION NOTICE
59 -- CIRCUIT CARD ASSEMBLY - DRAWINGS - DRAWINGS
- Notice Date
- 9/9/2015
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334418
— Printed Circuit Assembly (Electronic Assembly) Manufacturing
- Contracting Office
- Department of the Navy, Naval Sea Systems Command, NSWC Port Hueneme Division, 4363 Missile Way, Port Hueneme, California, 93043-4307
- ZIP Code
- 93043-4307
- Solicitation Number
- N63394-15-T-0126
- Archive Date
- 10/3/2015
- Point of Contact
- PAM J STILES, Phone: 805-228-8754, Casie L. Marriage, Phone: 8052280604
- E-Mail Address
-
pamela.stiles@navy.mil, casie.marriage@navy.mil
(pamela.stiles@navy.mil, casie.marriage@navy.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- DRAWINGS # 8592984 DRAWING # 8592985 This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is N63394-15-T-0126 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-83. The associated North American Industrial Classification System (NAICS) code for this procurement is 334418 with a small business size standard of 500 employees. This requirement is a small business set-aside and only qualified offerors may submit quotes. Naval Surface Warfare Center, Port Hueneme Division intends to enter into a Firm Fixed Price contract for the following: Circuit Card Assemblies: •1. 64C2 = VME-6U Multifunction I/O Board Configured With: C2 = 10 Channels A/D, +/- 40 VDC F1 = 10 Channels D/A, +/-10 VDC Z0 = Empty Slot K6 = 16 Channels Programmable Discrete I/O Z0 = Empty Slot Z0 = Empty Slot 0 = No On-Board AC Reference Supply A = VME64 Front Panel P2 & P0 I/O Only H = -40°C to +85°C with Conformal Coating 1 = Front I/O Ethernet Connection 0 = Without Encoder/Commutation Option P/N: 64C2-C2F1Z0K6Z0Z00AH10 Drawing #: 8592984 QTY: 1 each •2. 64CS4 = VME-6U D/S, S/D, LVDT Simulation/Measurement and Multifunction I/O Board Configured With: SJ = 4 Channels Prog Syn/Rsl To Dig, 90 VL-L,115 Vrms, 400Hz-1KHz Z0 = Empty Slot 20 = 2 Channels SYN 90 Vrms Output, 10-115 Vrms Ref, 400-1K Hz Freq, Max Load 2.2 VA/CH 20 = 2 Channels SYN 90 Vrms Output, 10-115 Vrms Ref, 400-1K Hz Freq, Max Load 2.2 VA/CH 20 = 2 Channels SYN 90 Vrms Output, 10-115 Vrms Ref, 400-1K Hz Freq, Max Load 2.2 VA/CH 0 = No On-Board AC Reference Supply A = VME64 Front Panel P2 & P0 I/O Only H = -40°C to +85°C with Conformal Coating 1 = Front I/O Ethernet Connection 0 = Without Encoder/Commutation Option P/N: 64CS4-SJZ02020200AH100 Drawing #: 8592985 QTY: 2 each Questions must be requested by Sept 14, 2015, 5:00 pm PAC, with a solicitation closing date of Sept 18, 2015, 5:00 pm PAC. Inspection and Acceptance is to be at destination with delivery FOB destination, Port Hueneme, CA 93043-4711. New equipment only, no remanufactured or "gray market" items. Bid must be good for a minimum of 45 calendar days after close of buy. Terms are Net 30. In addition to price, responses shall include the following: 1. Company Cage Code 2. Tax ID# 3. Country Items are manufactured in 4.If freight charges apply, please provide firm fixed price (FFP) shipping cost to Port Hueneme, CA 93043-4711. 5. Pricing: Are the items quoted available on a commercial, published, or on-line price listing? If so, please attach to the RFQ response. If internal price listing, please provide the title of your price list with the page number the items are listed on & the date it was established. 6. Does your company accept Wide Area Work Flow (WAWF) for electronic invoicing? WAWF is the DoD mandated of invoicing for Government orders. To register for WAWF, please go to the web site at https://wawf.eb.mil To be eligible for award of a Government contract, contractors must be properly registered in the System for Award Management (SAM). The link to the website is https://www.sam.gov. The selected offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: •· FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition •· FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications •· FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition •· FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items, all clauses in paragraph (a); and the following clauses in paragraph (b): 52.204-10, 52.209-6, 52.209-10, 52.219-6, 52.219-13, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-36, 52.223-18, 52.225-1, 52.225-13, 52.232-33 All changes to the requirement that occur prior to the closing date will be posted to FedBizOpps. It is the responsibility of interested vendors to monitor FedBizOpps for amendments that may be issued to this solicitation. For changes made after the closing date, only those offerors that provide a proposal will be provided any changes/amendments and considered for future discussions and/or award. No hard copies of the solicitation will be mailed. Quotes must be submitted in portable document format (.pdf) by email to the Primary Point of Contact (POC) identified below. It is the responsibility of the offeror to submit offers to the POC at NSWC PHD by the closing date of Sept 18, 2015, 5:00 pm Pac. Award will be made to the lowest priced, technically acceptable, responsive and responsible Offeror. This is a competitive LPTA selection in which technical acceptability is considered the most important factor. By submission of its offer, the Offeror accepts all solicitation requirements, including terms and conditions, representations and certifications, and technical requirements. All technically acceptable offers, with satisfactory past performance, shall be treated equally except for their prices. Failure to meet a requirement may result in an offer being determined technically unacceptable. Offerors must clearly identify any exception to the solicitation and conditions and provide complete accompanying rationale. The Government intends to select ONE contractor for award of this effort.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSEA/N63394/N63394-15-T-0126/listing.html)
- Record
- SN03878298-W 20150911/150910000405-393811ae77691b17172086075b9ed82e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |