SOLICITATION NOTICE
16 -- Trailer
- Notice Date
- 8/7/2015
- Notice Type
- Presolicitation
- NAICS
- 333924
— Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43218-3990, United States
- ZIP Code
- 43218-3990
- Solicitation Number
- SPMYM1-15-Q-0096
- Archive Date
- 8/27/2015
- Point of Contact
- Jessica R. G. Hedgepeth, Phone: 7573969446
- E-Mail Address
-
jessica.gonzales@dla.mil
(jessica.gonzales@dla.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- The Defense Logistics Agency, DLA Maritime Norfolk, Contracting Division, intends to negotiate a Firm Fixed Price contract to procure Trailers 2 each to be shipped to the Trident Refit Facility, Kings Bay, Georgia 31547. The North American Industry Classification System (NAICS) code is 333924 (Industrial Truck, Tractor, Trailer & Stacker Machinery, Metal Platform: LAPES) and the procurement will be 100% set aside for small businesses. The contract line items are as follows: CLIN 0001: Trailer 2 Each This is for an 8' wide, 40' long bumper pull trailer, which will be pulled by a truck. (Please send email to jessica.gonzales@dla.mil with Drawings of Overhead view, Side View, and Front): (All dimensions are LENGTH x WIDTH x HEIGHT) 1 = 36" X 48"X29" desk w/ 2 file drawers, office type desk, wood laminate and steel 2 = 24" X 72" X 36" overhead cabinets, galvanized/stainless steel 3 = 24" X 48" X 42" work bench w/cabinets, stationary, galvanized/stainless steel 4 = 36" X 72" X 36" galvanized/stainless steel workbench w/ heavy duty drawers 5 = 24" X 96" stainless steel cabinets; floor to ceiling (~ 9 cabinets) 6 = 24" X 48" steel shelves; floor to ceiling 7 = 8' fluorescent lights 8 = 36" X 72" X 30" table, wood/wood laminate and steel 9 = AC/Heater unit, contractor installed, 6,000 to 9000 BTU of cooling/heating, roof mounted, 1 located above office area and 1 located above office area. 10 = In floor access to storage, 24" X 24" hatch with recessed, spring loaded handle 11 = refrigerator, contractor installed, ~20" X ~20" X ~34" (WidthxDepthxHeight) (ie Frigidaire FFPR40L2QB) 1 = exterior access to underfloor storage, recessed locking (w/key) slam latch/paddle handle 2 = AC/Heater units -Partition wall at 20' -6,000 lbs. tie downs (external, attached to frame) Additional Requirements • Flat front: This is a style type for enclosed trailer • Rounded roof: This is a style type for enclosed trailer • R5 insulation in office area (floor, ceiling, and walls) • Inside height of 7' • Spare tire • 36" fold up step for side door • Double rear doors: min 36" each, all Aluminum Anti-Rack Cam Lock with Stainless Steel Hasp, no windows/glass, Zinc Plated Steel Strap Hinges with Grease Zerks • Side door (36" wide) w/ dead bolt lock • Tinted side windows in office section x4 (36"X24") • 4 trailer stabilizer jacks (scissor jacks ) • Underfloor storage, 40' X 8' X 2' • Non-wax tile flooring (gray, checkered, or blue) or wood laminate in office • Spray in protective flooring in storage section • Office walls finished with water resistant paneling ○ Colors: light blue, light colored wood, yellow, turquoise • Luan lining in storage area, ATP Wall Guard, • Chassis undercarriage fully coated with anti-corrosion protectant • Electrical Requirements: ○ SAE color coded 12V electrical system ○ 7 way trailer end connector ○ 120V wall switch for lights (one in office next to entry, one in storage near partition door) ○ 10 120V 20A duplex receptacles - 2 on each wall; alternating circuits in the office -2 above the work bench in the storage area; alternating circuits ○ 120/240V 100A Service panel with 100A main breaker ○ 120/240V 50A motorbase twist lock receptacle wired to service panel ○ 50A separable 25' shoreline molded male twist lock female • 0.030 aluminum exterior; red, white, or silver in color • LED clearance lights: 3 on each side, 1 in front, 1 in rear (red) • LED stop/tail/turn lights; one on each side of the back • All cabinets need to have handle locking latches (not friction latches) (key lock slam/paddle latch • 24 inch ATP Stone Guard with Integrated Corners in front • Vertical Posts & Roof Bows: One-piece galvanized steel roof bows. Vertical posts on 16 inch centers & notched to eliminate bowed sides. • 3/8 inch DryMax High-Performance Interior Sidewalls • 3/4 inch DryMax High-Performance Interior Decking • Tubular Steel Main Rails • Full Height Steel C-channel Crossmembers • 3/8 inch DryMax High-Performance Interior Sidewalls • 3/4 inch DryMax High-Performance Interior Decking • Tubular Steel Main Rails • Full Height Steel C-channel Crossmembers FEATURE: DESCRIPTION: 1.)A-Frame Single Axle: 2-piece Integrated A-Frame Tandem Axels: 3-piece Integrated A-Frame with center tube anchored to tube crossmember 2.)Jack Ram 2000 lb. with Removable Sand Pad 3.)Main Frame Heavy-Duty Tubular Steel Main Rails 4.)Front & Rear Corners Radius steel cornerposts, front & rear, extended to bottom of frame for maximum welding surface for long lasting durability 5.)Front Wall Vertical posts on 16" centers with Heavy Gauge Full Width End Rail 6.)Vertical Supports 1 1/8" Hat section on 16" centers 7.)Roof Supports Galvanized roof bows on 24" centers 8.)Axle Torflex with EZ lube & brake flange 9.)Tires/Wheels Goodyear radial tires with e-coated silver spoke wheels 10.)Corrosion Prevention Measures: Complete Chassis Undercoated with CPC. All exposed steel fram surfaces are primed & painted. Electrolysis Barrier between frame & aluminum exterior skin. 11.)12-Volt Wiring Run inside frame with no exposed wiring 12.)Junction Box Easy access junction box inside trailer & on A-Frame 13.)Exterior Lighting All exterior lighting including clearance, marker & brake lights are 12-Volt LED 14.)Flooring ¾" Plywood floor with exterior surface undercoated & interior surface painted gray 15.)Interior Sidewalls ¼" Plywood trimmed with "H" moldings 16.)Exterior Skin.030 Aluminum (11 colors) 4', 5' & 6' wide models are Bonded 17.)Fenders Single Axle: Aluminum Tread Plate. Tandem Axles: Aluminum Mill Finish 18.)Roof 1-Piece Aluminum (8' & Wide body models-Galvanized steel) 19.)Roof Cove.080 Extruded Anodized aluminum cove with drip rail 20.)Fasteners Corrosion Resistant Stalguard Coated 21.)Hinges (Swing Doors) Aluminum or steel with Zirk fittings 22.)Hinges (Ramp Doors) ¾" Pin full width 23.)Door Latching Aluminum Anti-Rack Cam with stainless steel hasp The solicitation number will be SPMYM1-15-Q-0096. The solicitation is expected to be posted on or around 07 August 2015 and close on 12 August 2015 and responses may be faxed to the attention of Jessica Hedgepeth at fax number 757-396-9447 or emailed to her at jessica.gonzales@dla.mil. Any questions must be written and sent by email provided above. Please make sure that the solicitation number (SPMYM1-15-Q-0096) is included in the subject line of any email correspondence. Emails without subject lines will not be read due to security issues. Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at either www.neco.navy.mil or www.fedbizopps.gov, as this office no longer issues hard-copy solicitations. By submitting a proposal, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPMYM1-15-Q-0096/listing.html)
- Place of Performance
- Address: Norfolk Naval Shipyard, Portsmouth, VA 23709, Portsmouth, Virginia, 23709, United States
- Zip Code: 23709
- Zip Code: 23709
- Record
- SN03829305-W 20150809/150807235313-07114d4c660959eb9b0ca09cd580fa60 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |