DOCUMENT
65 -- VA258-15-AP-4976//644-16-1-5909-0005 CE Lifescience CE V-Ring - Attachment
- Notice Date
- 8/4/2015
- Notice Type
- Attachment
- NAICS
- 339113
— Surgical Appliance and Supplies Manufacturing
- Contracting Office
- Department of Veterans Affairs;VISN/18PHX;4135 S. Power Rd;Mesa, AZ 85212
- ZIP Code
- 85212
- Solicitation Number
- VA25815N0654
- Archive Date
- 8/14/2015
- Point of Contact
- Melissa Harding
- E-Mail Address
-
6-7935<br
- Small Business Set-Aside
- N/A
- Description
- ***This is NOT a solicitation for quotes. This is only a Request for Information: Sources Sought to see if any other vendors can meet the requirements. *** The Department of Veterans Affairs proposes to enter into a new contract on the basis of other than full and open competition to establish a consignment contract to restock bioprosthesis from Edwards Lifescience (Edwards) for the brand-name Carpentier Edwards Physio Mitral Ring intended for the correction of mitral valve insufficiency, or mixed mitral insufficiency and stenosis, where treatment does not necessitate a replacement of the natural mitral valve. For Type I mitral insufficiencies with no subvalvular lesions and normal valvular movements, this ring technique used alone is sufficient. However, this ring technique must be associated with mitral valvuloplasty repair in Type II insufficiencies with a prolapsed valve due to elongation or rupture of the chordae tendineae or papillary muscle and in Type III insufficiencies with limitation of valvular movements due to fusion of the commissures or chordae, or chordal hypertrophy. If any vendor can meet the below specifications BRAND NAME OR EQUAL TO, please respond to this Sources Sought with enough information to demonstrate that these specifications can be met. GENERAL REQUIREMENTS Task 1 - The Carpentier-Edwards Physio Annuloplasty Ring is intended to meet the challenges of modern valvuloplasty by maintaining the physiologic annular shape and motion. "Subtask 1 The annuloplasty ring is designed to follow the functional changes which occur during the cardiac cycle, thereby maintaining coaptation and valve integrity in systole while permitting good hemodynamics in diastole. "Subtask 2 The decision to undertake annuloplasty can be made only after visual analysis of the lesion present. The most favorable conditions for annuloplasty using a prosthetic ring is a combination of the distended natural valve ring associated with supple valve cusps and normal chordae tendineae. The remodeling annuloplasty technique with Carpentier-Edwards Physio Annuloplasty Ring, may be used in all acquired or congenital mitral insufficiencies with dilatation and deformation of the fibrous mitral annulus, with the exception of severe congenital malformations (e.g. AV canal or hypoplastic commissures), or severe degenerative valvular diseases where there is considerable excess tissue. ? DELIVERABLES CE 4450-24MM 24MM FLEXIBLE MITRAL ANNULOPLASTY RING1 CE 4450-26MM 26MM FLEXIBLE MITRAL ANNULOPLASTY RING1 CE 4450-28MM 28MM FLEXIBLE MITRAL ANNULOPLASTY RING1 CE 4450-30MM 30MM FLEXIBLE MITRAL ANNULOPLASTY RING1 CE 4450-32MM 32MM FLEXIBLE MITRAL ANNULOPLASTY RING1 CE 4450-34MM 34MM FLEXIBLE MITRAL ANNULOPLASTY RING1 CE 4450-36MM 36MM FLEXIBLE MITRAL ANNULOPLASTY RING1 CE 4450-38MM 38MM FLEXIBLE MITRAL ANNULOPLASTY RING1 6200T24Physio Tricuspid Annuloplasty System 24T1 6200T26Physio Tricuspid Annuloplasty System 26T1 6200T28Physio Tricuspid Annuloplasty System 28T1 6200T30Physio Tricuspid Annuloplasty System 30T1 6200T32Physio Tricuspid Annuloplasty System 32T1 6200T34Physio Tricuspid Annuloplasty System 34T1 6200T36Physio Tricuspid Annuloplasty System 36T1 CE 4400-28MM 28MM RIGID MITRAL ANNULOPLASTY RING1 CE 4400-30MM30MM RIGID MITRAL ANNULOPLASTY RING1 CE 4400-32MM32MM RIGID MITRAL ANNULOPLASTY RING1 CE 4400-34MM34MM RIGID MITRAL ANNULOPLASTY RING1 ***This is NOT a solicitation for quotes. This is only a Sources Sought to see if any other vendors can meet the requirements. ***
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/VA/PhVAMC/HMC/VA25815N0654/listing.html)
- Document(s)
- Attachment
- File Name: VA258-15-N-0654 VA258-15-Q-0072_1.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=2212547&FileName=VA258-15-N-0654-000.docx)
- Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=2212547&FileName=VA258-15-N-0654-000.docx
- File Name: VA258-15-N-0654 FBO-DESCRIPTION.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=2212548&FileName=VA258-15-N-0654-001.docx)
- Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=2212548&FileName=VA258-15-N-0654-001.docx
- Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
- File Name: VA258-15-N-0654 VA258-15-Q-0072_1.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=2212547&FileName=VA258-15-N-0654-000.docx)
- Record
- SN03822147-W 20150806/150804235333-04e4260eeacc90e1b1d75b2102f656a0 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |