Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF JULY 31, 2015 FBO #4998
SOLICITATION NOTICE

17 -- Phase Dock Equipment

Notice Date

7/29/2015
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

333924 — Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing
 

Contracting Office

Department of the Air Force, Air Combat Command, 355 CONS, 3180 S Craycroft Rd, Davis Monthan AFB, Arizona, 85707-3522
 

ZIP Code

85707-3522
 

Solicitation Number

FA4877-15-Q-0373
 

Point of Contact

Macy E. Benjamin, Phone: 5202282217, Jozlyn J. Brewton, Phone: 5202283873
 

E-Mail Address

macy.benjamin@us.af.mil, jozlyn.brewton@us.af.mil
(macy.benjamin@us.af.mil, jozlyn.brewton@us.af.mil)
 

Small Business Set-Aside

N/A
 

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format prescribed in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Solicitation FA4877-15-Q-0373 is issued as a request for quotation (RFQ). This solicitation document incorporates provisions and clauses of those in effect through Federal Acquisition Circular 2005-83, Defense Circular Number 20150626, and Air Force Acquisition Circular 2015-0406. This procurement is being issued with no set aside. The results of this requirement will be a firm fixed priced (FFP) contract. The right to make multiple or no award is reserved in the event it is advantageous to the Government to do so. Items called for by this RFQ have been identified in the schedule by brand name or equal. The contractor shall provide the following Contract Line Item Number (CLIN): CLIN 0001- HH-60G AIRCRAFT SUPPORT FRAME (HH-60G BELLY CRADLE)- (3EA) Overall Dimensions: 66 inches W x 54 inches L x 25.9 inches (nominal) Designed to support aircraft at STA 217/308. Frame Construction: Bosch/Rexroth aluminum extrusion Capacity: 20,000 - Aircraft (ACFT) support frame (HH-60 Belly cradle) to support ACFT during phase/Depot Field Team (DFT) repairs. Size 72" wide by 54" deep and 28" tall (adjustable up/down 9"). Frame made with 90mm by 90mm heavy Bosh strut and trussed for rigidity and strength. Ends equipped with screw down leveling jacks rated at 2 tons each to lift and support 5 tons. The frame will have 4 each swivel casters used for transportation only. Edge in contact with ACFT will be a 1" hard felt or equal CLIN 0002- HHThis is a combined synopsis/solicitation for commercial items prepared in accordance with the format prescribed in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Solicitation FA4877-15-Q-0373 is issued as a request for quotation (RFQ). This solicitation document incorporates provisions and clauses of those in effect through Federal Acquisition Circular 2005-83, Defense Circular Number 20150626, and Air Force Acquisition Circular 2015-0406. This procurement is being issued with no set aside. The results of this requirement will be a firm fixed priced (FFP) contract. The right to make multiple or no award is reserved in the event it is advantageous to the Government to do so. Items called for by this RFQ have been identified in the schedule by brand name or equal. The contractor shall provide the following Contract Line Item Number (CLIN): CLIN 0001- HH-60G AIRCRAFT SUPPORT FRAME (HH-60G BELLY CRADLE)- (3EA) Overall Dimensions: 66 inches W x 54 inches L x 25.9 inches (nominal) Designed to support aircraft at STA 217/308. Frame Construction: Bosch/Rexroth aluminum extrusion Capacity: 20,000 - Aircraft (ACFT) support frame (HH-60 Belly cradle) to support ACFT during phase/Depot Field Team (DFT) repairs. Size 72" wide by 54" deep and 28" tall (adjustable up/down 9"). Frame made with 90mm by 90mm heavy Bosh strut and trussed for rigidity and strength. Ends equipped with screw down leveling jacks rated at 2 tons each to lift and support 5 tons. The frame will have 4 each swivel casters used for transportation only. Edge in contact with ACFT will be a 1" hard felt or equal CLIN 0002- HH-60G AIRCRAFT FOLDING MID-SECTION/TAIL SUPPORT- (1 EA) Overall Dimensions: 36.7 inches W x 44.9 inches L x 38.9 inches 'H nominal). Frame Construction: Bosch/Rexroth aluminum extrusion. Capacity: 20,000 lbs. Support Saddle: Welded aluminum plate - Folding Mid-Section /Tail Support to support ACFT during phase/DFT repairs. Size 33" wide, 44.9" long, 31.50" tall with a curved support saddle to match radius of underside of ACFT at support location. Frame will be Bosch aluminum extrusion of 90mm by 90mm and "saddle" will be constructed of aluminum plate and radius will be covered with W' rubber pad. Ends equipped with screw down leveling jacks rated at 20,000lbs maximum and allow stand to increase 9" in height. Underside will have skid pads to protect floors. "Saddle" will lock in upright position when in use and fold down for ease of install/removal or equal CLIN 0003- HH-60G AIRCRAFT TAIL PYLON SUPPORT STAND- (1EA) Overall Dimensions: 30.0" x 120."L x 59"H (nominal). Construction: 311 x 3" x 3/16" wall square steel tube base Finish: Black powder coat. Capacity: 1,500 lbs. Support Point: Foot pegs supported by - Pylon Support Stand to support tail pylon for maintenance during phase/DFT. The Stand will be designed to attach to pylon hinge fittings support the upper section by the foot step pegs. The construction will be 3" by 311 by 3/16" square wall steel tube. Finish will be black powder coat. The support will have an rectangular base configuration with 4 swivel locking 611 by 2" casters. The pylon hinge fittings will be attached to mounting points on a tilting plate provided at one end of the support stand. The pylon will be lowered in to the stand by the hoist that removed it from the airframe in its "on airframe" position. Once the hinge fittings are secured, the pylon will lower onto the support frame. The foot pegs will be supported by adjustable vertical post equipped with padded receiver cups. Each foot peg on both sides of the pylon will be used in the support of the pylon. Overall size: 124" long, 59"tall and 30" wide. Shipped fully assemble and ready to use. Capacity rating 1500 lbs. or equal CLIN 0004- HH-60G AIRCRAFT CABIN TO TAIL SUPPORT STAND -(1 EA) Overall Dimensions: 30.0" x 120."L x 59"H (nominal) Construction: 3" x 3" x 3/16" wall square steel tube base Finish: Black powder coat. Capacity: 1,500 lbs. Support Point: Foot pegs supported by Cabin/Tail Support Stand to support aircraft (ACFT) during phase/DFT. Stand designed to attach to lift lugs at cabinet/tail joint. The construction will be 311 by 3" by 3/16" square wall steel tube. Finish being black powder coat. The support will have an "H" base configuration with 4 swivel locking casters and 4 screw jack for lifting and leveling. The support will be provided by 2 removable 211 schedule 80 steel tubes that fit into pockets on the portable base. The support tubes will be removable to allow locating the base the air frame. Once the portable base is in place the support tubes will be removed from their storage ·positions and inserted into the support sleeves. 1 Support for the air frame is to be achieved by extending the screw down floor locks until height and level required met. The support tubes will have mount points to match the tie down points on the air frame. The tubes can be rotated to raise or lower the attachment position. Casters will be 2 rigid and 2 swivels, 611 diameter. Screw down jacks will have 2.5 ton lifting capacity each with 12" of usable vertical travel or equal CLIN 0005-HH-60G AIRCRAFT TEMPORARY FLOOR PANEL -(1 EA) Temp Floor Panel to provide a work area while ACFT is in phase/DFT repair hard plastic material, must be able to withstand average human weight, ability to be removed and install multiple times. Panel will have support under it via ACFT structure so it must be smooth and not damage ACFT or equal CLIN 0006- HH-60G AIRCRAFT TEMPORARY FLOOR PANEL (MIDDLE AFT FLOOR W/RECESSED HANDLES) -(1 EA) - Temp Floor Panel to provide a work area while ACFT is in phase/DFT repair. Hard plastic material, must be able to withstand average human weight, ability to be removed and install multiple times. Panel will have support under it via ACFT structure so it must be smooth and not damage ACFT or equal CLIN 0007- HH-60G AIRCRAFT TEMPORARY FLOOR PANEL (AFT FLOOR) -(1 EA) Temp Floor Panel to provide a work area while ACFT in phase/DFT repair. Hard plastic material, must be able to withstand average human weight, ability to be removed and install multiple times. Panel will have support under it via ACFT structure so it must be smooth and not damage ACFT or equal CLIN 0008- HH-60G AIRCRAFT TEMPORARY FLOOR PANEL (TRANSITION STEP) -(1 EA) Temp Floor Panel to provide a work area while ACFT is in phase/DFT repair Hard plastic material, must be able to withstand average human weight, ability to be removed and install multiple times. Panel will have support under it via ACFT structure so it must be smooth and not damage ACFT or equal CLIN 0009- HH-60G AIRCRAFT TEMPORARY FLOOR PANEL -(1 EA) Temp Floor Panel to provide a work area while ACFT is in phase/DFT repair. Hard plastic material must be able to withstand average human weight, ability to be removed and install multiple times. Panel will have support under it via ACFT structure so it must be smooth and not damage ACFT or equal CLIN 0010- HH-60G AIRCRAFT TEMPORARY FLOOR PANEL (CO-PILOT FLOOR) -(1 EA) Temp Floor Panel to provide a work area while ACFT is in phase/DFT repair. Hard plastic material, must be able to withstand average human weight, removed and install multiple times. Panel will have support under it via ACFT structure so it must be smooth and not damage ACFT. CLIN 0011- HH-60G AIRCRAFT TEMPORARY FLOOR PANEL (MAIN GEAR BOX (MGB) WELL COVER W/ALUMINUM EXTRUSION REINFORMENT BOLTED TO UNDERSIDE (1 EA) - Due to panel not having underlying support other than the edges, it will require additional reinforcement to handle up to 600 pounds. It must be smooth and not damage ACFT at contact points. Temp Floor Panel is to provide a work area while ACFT is in phase/DFT repair. Hard plastic material, ability to be removed and install multiple times or equal CLIN 0012- Delivery Info: DODF1PT5E 0012 HH-60G AIRCRAFT TEMPORARY FLOOR PANEL (MIDDLE FORWARD FLOOR) - (1 EA) Temp Floor Panel to provide a work area while ACFT is in phase/DFT repair. Hard plastic material, must be able to withstand average human weight, ability to be removed and install multiple times. Panel will have support under it via ACFT structure so it must be smooth and not damage ACFT. THIS REQUIREMENT IS BRAND NAME OR EQUAL. IF QUOTING AN OR EQUAL ITEM PLEASE INCLUDE ALL APPLICABLE DETAILS TO SHOW THAT THE PROPSED ITEM MEETS REQUIRED SPECIFICATIONS. Shipping will be FOB Destination to F1PT5E - 923rd AMXS, 3071 South 1st Street, Building 1550, DMAFB, Tucson, AZ. 85707-2522. The shipment should be marked for TSgt William Gaylord. 52.204-7, System for Award Management 52.211-6, Brand Name or Equal applies to this acquisition. 52.204-13, System for Award Management Maintenance 52.212-1, Instructions to Offeror -- Commercial applies to this acquisition. 52.212-2, Evaluation -- Commercial Items applies to this acquisition. Quotes will be evaluated on price. Offeror must include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Items with its offer or have an Online Representations and Certification Application which is current. 52.212-4, Contract Terms and Conditions -- Commercial Items applies to this acquisition. 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders-Commercial applies to this acquisition. 52.222-50, Combating Trafficking in Persons 52.233-3, Protest After Award 52.233-4, Applicable Law for Breach of Contract Claim 52.204-10, Reporting Executive compensation and First-Tier Subcontract Awards 52.209-6, Protecting the Government' Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.219-1, Small Business Program Representations Alternate I of 52.219-1 52.219-28, Post Award Small Business Program Representation 52.222-3, Convict Labor 52.222-19, Child Labor-Cooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities 52.222-22, Previous Contracts and Compliance Reports 52.222-26, Equal Opportunity 52.222-35, Equal Opportunity for Veterans 52.222-36, Affirmative Action for Workers with Disabilities 52.222-37, Employment Reports on Veterans 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving 52.225-13, Restrictions on Certain Foreign Purchases 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-Representation and Certifications 52.239-1, Privacy or Security Safeguards 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels 52.232-40, Providing Accelerated Payments to Small Business Subcontractors 52.237-1, Site Visit applies to this acquisition. 252.204-7004 Alt A, System for Award Management applies to this acquisition. 252.203-7000, Requirements Relating to Compensation of Former DoD Officials 252.225-7036 Alt I Buy American- Free Trade Agreements-Balance of Payments 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports 252.232-7006, Wide Area WorkFlow Payment Instructions 252.232-7010, Levies on Contract Payment 252.247-7023, Transportation of Supplies by Sea DM006 - Individual Access to DM with a Criminal Background DM010 - Illegal Immigrants and Foreign Nationals DM017 - Davis Monthan AFB Marijuana Policy DM019 - Contractor Manpower Reporting 5352.242-9000, Contractor Access to Air Force Installations 5352.223-9001, Health and Safety on Government Installations 5352.201-9101, AF Ombudsman clause- ACC Ombudsman follows: Mr. Christopher S. Williams, OL KC AFICA,129 Andrews Street, Suite 102, Joint Base Langley-Eustis, VA 23665-2769, phone: (757) 764-6513, fax: (757) 764-4400, email: christopher.williams.196@us.af.mil Any questions pertaining to this acquisition shall submitted in writing no later than 30 July, 2015 by 1:00 PM. Written questions shall be sent to SrA Macy Benjamin via email at macy.benjamin@us.af.mil or fax at (520) 228-2217. It is the responsibility of the offeror to view the website for any changes or amendments to this RFQ. Quotes will be due to the 355th Contracting Squadron, 3180 S. Craycroft Rd. Davis-Monthan AFB, AZ 85707, via fax or email by 6 August 2015, 10:00 AM, Arizona Local Time. Point of Contact is: SrA Macy Benjamin at email: macy.benjamin@us.af.mil, phone: (520) 228 2217, or A1C Jozlyn Brewton at jozlyn.Brewton@us.af.mil PH: (520) 228-3873 or by fax at (520) 228-5284. If faxing a quote please call for confirmation that quote was received. 60G AIRCRAFT FOLDING MID-SECTION/TAIL SUPPORT- (1 EA) Overall Dimensions: 36.7 inches W x 44.9 inches L x 38.9 inches 'H nominal). Frame Construction: Bosch/Rexroth aluminum extrusion. Capacity: 20,000 lbs. Support Saddle: Welded aluminum plate - Folding Mid-Section /Tail Support to support ACFT during phase/DFT repairs. Size 33" wide, 44.9" long, 31.50" tall with a curved support saddle to match radius of underside of ACFT at support location. Frame will be Bosch aluminum extrusion of 90mm by 90mm and "saddle" will be constructed of aluminum plate and radius will be covered with W' rubber pad. Ends equipped with screw down leveling jacks rated at 20,000lbs maximum and allow stand to increase 9" in height. Underside will have skid pads to protect floors. "Saddle" will lock in upright position when in use and fold down for ease of install/removal or equal CLIN 0003- HH-60G AIRCRAFT TAIL PYLON SUPPORT STAND- (1EA) Overall Dimensions: 30.0" x 120."L x 59"H (nominal). Construction: 311 x 3" x 3/16" wall square steel tube base Finish: Black powder coat. Capacity: 1,500 lbs. Support Point: Foot pegs supported by - Pylon Support Stand to support tail pylon for maintenance during phase/DFT. The Stand will be designed to attach to pylon hinge fittings support the upper section by the foot step pegs. The construction will be 3" by 311 by 3/16" square wall steel tube. Finish will be black powder coat. The support will have an rectangular base configuration with 4 swivel locking 611 by 2" casters. The pylon hinge fittings will be attached to mounting points on a tilting plate provided at one end of the support stand. The pylon will be lowered in to the stand by the hoist that removed it from the airframe in its "on airframe" position. Once the hinge fittings are secured, the pylon will lower onto the support frame. The foot pegs will be supported by adjustable vertical post equipped with padded receiver cups. Each foot peg on both sides of the pylon will be used in the support of the pylon. Overall size: 124" long, 59"tall and 30" wide. Shipped fully assemble and ready to use. Capacity rating 1500 lbs. or equal CLIN 0004- HH-60G AIRCRAFT CABIN TO TAIL SUPPORT STAND -(1 EA) Overall Dimensions: 30.0" x 120."L x 59"H (nominal) Construction: 3" x 3" x 3/16" wall square steel tube base Finish: Black powder coat. Capacity: 1,500 lbs. Support Point: Foot pegs supported by Cabin/Tail Support Stand to support aircraft (ACFT) during phase/DFT. Stand designed to attach to lift lugs at cabinet/tail joint. The construction will be 311 by 3" by 3/16" square wall steel tube. Finish being black powder coat. The support will have an "H" base configuration with 4 swivel locking casters and 4 screw jack for lifting and leveling. The support will be provided by 2 removable 211 schedule 80 steel tubes that fit into pockets on the portable base. The support tubes will be removable to allow locating the base the air frame. Once the portable base is in place the support tubes will be removed from their storage ·positions and inserted into the support sleeves. 1 Support for the air frame is to be achieved by extending the screw down floor locks until height and level required met. The support tubes will have mount points to match the tie down points on the air frame. The tubes can be rotated to raise or lower the attachment position. Casters will be 2 rigid and 2 swivels, 611 diameter. Screw down jacks will have 2.5 ton lifting capacity each with 12" of usable vertical travel or equal CLIN 0005-HH-60G AIRCRAFT TEMPORARY FLOOR PANEL -(1 EA) Temp Floor Panel to provide a work area while ACFT is in phase/DFT repair hard plastic material, must be able to withstand average human weight, ability to be removed and install multiple times. Panel will have support under it via ACFT structure so it must be smooth and not damage ACFT or equal CLIN 0006- HH-60G AIRCRAFT TEMPORARY FLOOR PANEL (MIDDLE AFT FLOOR W/RECESSED HANDLES) -(1 EA) - Temp Floor Panel to provide a work area while ACFT is in phase/DFT repair. See drawing for dimensions, hard plastic material, must be able to withstand average human weight, ability to be removed and install multiple times. Panel will have support under it via ACFT structure so it must be smooth and not damage ACFT or equal CLIN 0007- HH-60G AIRCRAFT TEMPORARY FLOOR PANEL (AFT FLOOR) -(1 EA) Temp Floor Panel to provide a work area while ACFT in phase/DFT repair. See drawing for dimensions, hard plastic material, must be able to withstand average human weight, ability to be removed and install multiple times. Panel will have support under it via ACFT structure so it must be smooth and not damage ACFT or equal CLIN 0008- HH-60G AIRCRAFT TEMPORARY FLOOR PANEL (TRANSITION STEP) -(1 EA) Temp Floor Panel to provide a work area while ACFT is in phase/DFT repair See drawing for dimensions, hard plastic material, must be able to withstand average human weight, ability to be removed and install multiple times. Panel will have support under it via ACFT structure so it must be smooth and not damage ACFT or equal CLIN 0009- HH-60G AIRCRAFT TEMPORARY FLOOR PANEL -(1 EA) Temp Floor Panel to provide a work area while ACFT is in phase/DFT repair. See drawing for dimensions, hard plastic material must be able to withstand average human weight, ability to be removed and install multiple times. Panel will have support under it via ACFT structure so it must be smooth and not damage ACFT or equal CLIN 0010- HH-60G AIRCRAFT TEMPORARY FLOOR PANEL (CO-PILOT FLOOR) -(1 EA) Temp Floor Panel to provide a work area while ACFT is in phase/DFT repair. See drawing for dimensions, hard plastic material, must be able to withstand average human weight, removed and install multiple times. Panel will have support under it via ACFT structure so it must be smooth and not damage ACFT. CLIN 0011- HH-60G AIRCRAFT TEMPORARY FLOOR PANEL (MAIN GEAR BOX (MGB) WELL COVER W/ALUMINUM EXTRUSION REINFORMENT BOLTED TO UNDERSIDE (1 EA) - Due to panel not having underlying support other than the edges, it will require additional reinforcement to handle up to 600 pounds. It must be smooth and not damage ACFT at contact points. Temp Floor Panel is to provide a work area while ACFT is in phase/DFT repair. See drawing for dimensions, hard plastic material, ability to be removed and install multiple times or equal CLIN 0012- Delivery Info: DODF1PT5E 0012 HH-60G AIRCRAFT TEMPORARY FLOOR PANEL (MIDDLE FORWARD FLOOR) - (1 EA) Temp Floor Panel to provide a work area while ACFT is in phase/DFT repair See drawing for dimensions, hard plastic material, must be able to withstand average human weight, ability to be removed and install multiple times. Panel will have support under it via ACFT structure so it must be smooth and not damage ACFT. THIS REQUIREMENT IS BRAND NAME OR EQUAL. IF QUOTING AN OR EQUAL ITEM PLEASE INCLUDE ALL APPLICABLE DETAILS TO SHOW THAT THE PROPSED ITEM MEETS REQUIRED SPECIFICATIONS. Shipping will be FOB Destination to F1PT5E - 923rd AMXS, 3071 South 1st Street, Building 1550, DMAFB, Tucson, AZ. 85707-2522. The shipment should be marked for TSgt William Gaylord. 52.204-7, System for Award Management 52.211-6, Brand Name or Equal applies to this acquisition. 52.204-13, System for Award Management Maintenance 52.212-1, Instructions to Offeror -- Commercial applies to this acquisition. 52.212-2, Evaluation -- Commercial Items applies to this acquisition. Quotes will be evaluated on price. Offeror must include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Items with its offer or have an Online Representations and Certification Application which is current. 52.212-4, Contract Terms and Conditions -- Commercial Items applies to this acquisition. 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders-Commercial applies to this acquisition. 52.222-50, Combating Trafficking in Persons 52.233-3, Protest After Award 52.233-4, Applicable Law for Breach of Contract Claim 52.204-10, Reporting Executive compensation and First-Tier Subcontract Awards 52.209-6, Protecting the Government' Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.219-1, Small Business Program Representations Alternate I of 52.219-1 52.219-28, Post Award Small Business Program Representation 52.222-3, Convict Labor 52.222-19, Child Labor-Cooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities 52.222-22, Previous Contracts and Compliance Reports 52.222-26, Equal Opportunity 52.222-35, Equal Opportunity for Veterans 52.222-36, Affirmative Action for Workers with Disabilities 52.222-37, Employment Reports on Veterans 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving 52.225-13, Restrictions on Certain Foreign Purchases 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-Representation and Certifications 52.239-1, Privacy or Security Safeguards 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels 52.232-40, Providing Accelerated Payments to Small Business Subcontractors 52.237-1, Site Visit applies to this acquisition. 252.204-7004 Alt A, System for Award Management applies to this acquisition. 252.203-7000, Requirements Relating to Compensation of Former DoD Officials 252.225-7036 Alt I Buy American- Free Trade Agreements-Balance of Payments 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports 252.232-7006, Wide Area WorkFlow Payment Instructions 252.232-7010, Levies on Contract Payment 252.247-7023, Transportation of Supplies by Sea DM006 - Individual Access to DM with a Criminal Background DM010 - Illegal Immigrants and Foreign Nationals DM017 - Davis Monthan AFB Marijuana Policy DM019 - Contractor Manpower Reporting 5352.242-9000, Contractor Access to Air Force Installations 5352.223-9001, Health and Safety on Government Installations 5352.201-9101, AF Ombudsman clause- ACC Ombudsman follows: Mr. Christopher S. Williams, OL KC AFICA,129 Andrews Street, Suite 102, Joint Base Langley-Eustis, VA 23665-2769, phone: (757) 764-6513, fax: (757) 764-4400, email: christopher.williams.196@us.af.mil Any questions pertaining to this acquisition shall submitted in writing no later than 30 July, 2015 by 1:00 PM. Written questions shall be sent to SrA Macy Benjamin via email at macy.benjamin@us.af.mil or fax at (520) 228-2217. It is the responsibility of the offeror to view the website for any changes or amendments to this RFQ. Quotes will be due to the 355th Contracting Squadron, 3180 S. Craycroft Rd. Davis-Monthan AFB, AZ 85707, via fax or email by 6 August 2015, 10:00 AM, Arizona Local Time. Point of Contact is: SrA Macy Benjamin at email: macy.benjamin@us.af.mil, phone: (520) 228 2217, or A1C Jozlyn Brewton at jozlyn.Brewton@us.af.mil PH: (520) 228-3873 or by fax at (520) 228-5284. If faxing a quote please call for confirmation that quote was received.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/ACC/355CONS/FA4877-15-Q-0373/listing.html)
 

Place of Performance

Address: Davis-Monthan AFB, Tucson, Arizona, 85707, United States

Zip Code: 85707
 

Record

SN03815463-W 20150731/150730000107-d1f93c5f22e4d279bace0e9b6a1fb967 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |