Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF JULY 19, 2015 FBO #4986
SOURCES SOUGHT

36 -- Sources Sought for the Fabrication and Delivery of Bulkheads for use in the navigation lock at McNary Lock and Dam

Notice Date
7/17/2015
 
Notice Type
Sources Sought
 
NAICS
332312 — Fabricated Structural Metal Manufacturing
 
Contracting Office
USACE District, Walla Walla, 201 N. Third Avenue, Walla Walla, WA 99362-1876
 
ZIP Code
99362-1876
 
Solicitation Number
W912EF-15-R-SS61
 
Response Due
7/31/2015
 
Archive Date
9/15/2015
 
Point of Contact
Cynthia Jacobsen, 509-527-7203
 
E-Mail Address
USACE District, Walla Walla
(cynthia.h.jacobsen@usace.army.mil)
 
Small Business Set-Aside
N/A
 
Description
This is not a solicitation. This information is for planning purposes only and is not to be construed as a commitment by the Government, implied or otherwise, to issue a solicitation or award a contract. The information we receive from this sources sought will aid in the development of the forthcoming solicitation W912EF-15-R-0065. Please read the following and respond in accordance with the requirements if interested in proposing on this project. REQUIREMENT DESCRIPTION The required work is to fabricate and deliver 8 navigation lock culvert bulkheads for McNary Dam. The bulkheads are inserted into slots at the upstream and downstream sides of the fill and drain tainter valves in the navigation lock. The bulkheads are utilized to dewater the tainter valves and the navigation lock chamber. The 8 bulkheads will be of a typical design with each bulkhead weighing approximately 7 tons and are approximately 12'-11 quote mark tall, 12'-10 quote mark wide, and 2'-0 quote mark deep. All bulkheads will be built from structural steel. The fabricator shall be certified under the AISC Bridge QMS Certification program, Intermediate (IBR). Equivalent certifications under the former AISC fabricator certification program that are still current will be acceptable. The fabricator shall be certified on or before the date of proposal submission and the certification shall remain current for the duration of the contract. Welders and welding operators shall meet the qualification requirements established by AWS D1.5M/D1.5. After the bulkheads are fabricated, each bulkhead will be painted with vinyl paint. Vinyl paint will be formula V-766e, Vinyl-Type Gray Impacted Immersion Coating. The painting shall be performed by a qualified painting contractor. The Paint Applicator shall be a certified SSPC QP 3 Painting Contractor. An AISC/SPE quote mark Sophisticated Paint Endorsement quote mark Certificate will also be accepted. The delivery schedule will require 4 bulkheads to be delivered to McNary Dam not later than February 4, 2016 and 4 bulkheads will be required to be delivered not later than May 26, 2016. SUBMISSION REQUIREMENTS FOR RESPONSES TO THIS SOURCES SOUGHT SYNOPSIS 1) Your intent to submit a quote for this project when it is formally advertised. 2) Name of firm with address, phone, and point of contact. 3) CAGE Code, DUNS number, or a copy of your System for Award Management (SAM) information. 4) The category of small business, such as 8(a), HUBZONE, or SDVOSB etc. 5) Statement of Capability (SOC) stating your skills, experience, knowledge, and equipment required to perform the specified type of work. This should include documentation of past specialized experience and technical competence in fabricating similar products, up to three (3) past projects for which your firm was the contractor. The SOC should be no more than three pages in length. 6) Submit a copy of the AISC Bridge QMS Certification program, Intermediate (IBR) certification or equivalent certifications under the former AISC fabricator certification program that are still current. 7) Submit a copy of the SSPC QP 3 or AISC/SPE quote mark Sophisticated Paint Endorsement quote mark certificate verifying current certification under these requirements. 8) Confirm your ability to meet the bulkhead delivery schedule requirements. Interested parties should submit their responses to Cyndi Jacobsen, Contract Specialist, via email to cynthia.h.jacobsen@usace.army.mil. Your response to this notice must be received by 3:00 PM PST, July 31, 2015.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA68/W912EF-15-R-SS61/listing.html)
 
Place of Performance
Address: McNary Lock and Dam 82790 Devore Rd. Umatilla OR
Zip Code: 97882-1441
 
Record
SN03800976-W 20150719/150717234705-6530ee801581d9098a42c592352505fd (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.