MODIFICATION
59 -- Sources Sought to modify existing stock of check valves with NSN: 4820-01-449-5590 to meet the new performance requirements of Drawing 5035817 Rev F.
- Notice Date
- 7/9/2015
- Notice Type
- Modification/Amendment
- Contracting Office
- ACC-APG - Aberdeen Division B, HQ CECOM CONTRACTING CENTER, 6001 COMBAT DRIVE, ABERDEEN PROVING GROU, MD 21005-1846
- ZIP Code
- 21005-1846
- Solicitation Number
- MARKET-SURVEY-5873-1
- Response Due
- 7/23/2015
- Archive Date
- 9/7/2015
- Point of Contact
- Lindsay Newhouse, 4438615484
- E-Mail Address
-
ACC-APG - Aberdeen Division B
(lindsay.d.newhouse.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- DO NOT CONTACT POSTER - L. NEWHOUSE. FOR ANY INFORMATION CONTACT: Scott Mahoney, RDER-PRP-G, (443) 395-6242 This is a Market Survey to locate a source for the modification of existing check valves with NSN: 4820-01-449-5590 to meet the new performance requirements of Drawing 5035817 Rev F to meet the performance requirements of the next higher assembly (NHA), Mast-Group, Hydraulic-Pneumatic OA-9054(V)4/G (NSN: 5985-01-129-1794). The OA-9054(V)4/G Mast Group is part of the PATRIOT Missile Defense System and is used to carry the amplifiers and antennae associated with the UHF communications equipment located in the various PATRIOT shelters. The existing stock of check valves has been identified to not perform in accordance with (IAW) the NHA performance requirements due to an ambiguity in the technical drawing 5035817 Rev E. This acquisition is for a one-time modification/repair effort of 140 valves. Existing valves can be inspected per request to CECOM at scott.h.mahoney4.civ@mail.mil. Check valves will not be disassembled in any way during inspection. The Original Equipment Manufacturer (OEM) for these check valves is AutoValve Inc. CAGE: 3SDB5. Detailed technical data for the manufacture or acceptance of these items is not available from the Army. Specification controlled government drawing 5035817 Rev F that details the mechanical, material and finish, environmental, marking, quality assurance, and configuration requirements is available upon request. All technical requests should be made to scott.h.mahoney4.civ@mail.mil Suppliers capable of modifying these units must so indicate, by writing via email to scott.h.mahoney4.civ@mail.mil. The response must include production lead time, production capacity by month, surge capacity, ranges for price breaks if applicable or any other information that could affect the acquisition, supply and delivery of the parts. The response should also include documentation such as a copy of a purchase order if the supplier was a vendor to the listed source or a statement from listed source demonstrating that the supplier can, in fact, supply the Army with these modified units from the supplier listed above. Successful supplier may be required to warrant that the item supplied will satisfactorily perform when used for the purpose intended by the Army. For more information contact Scott Mahoney, RDER-PRP-G, (443) 395-6242. The deadline for response is 23 July 2015.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/ab2045df4148f4571f60445ca4dcb7ce)
- Place of Performance
- Address: ACC-APG - Aberdeen Division B HQ CECOM CONTRACTING CENTER, 6001 COMBAT DRIVE ABERDEEN PROVING GROU MD
- Zip Code: 21005-1846
- Zip Code: 21005-1846
- Record
- SN03791904-W 20150711/150710000204-ab2045df4148f4571f60445ca4dcb7ce (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |