MODIFICATION
36 -- Rubber Extruder
- Notice Date
- 3/18/2015
- Notice Type
- Modification/Amendment
- NAICS
- 326291
— Rubber Product Manufacturing for Mechanical Use
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43218-3990, United States
- ZIP Code
- 43218-3990
- Solicitation Number
- SPMYM3-15-Q-3049
- Archive Date
- 4/21/2015
- Point of Contact
- Rachel J. Toracinta, Phone: 2074386818
- E-Mail Address
-
rachel.toracinta@navy.mil
(rachel.toracinta@navy.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR Subpart 12.6 and FAR Subpart 13.5, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on both FEDBIZOPPS ( https://www.fbo.gov/ )and NECO ( http://www.neco.navy.mil/ ). The RFQ number is SPMYM3-15-Q-3049. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005-78 and DFARS Change Notice 20150129. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm. The NAICS code is 326291 and the Small Business Standard is 500 Employees. Competition for this requirement is set-aside 100% for Small Businesses. DLA Maritime - Portsmouth, Kittery, ME Contracting Office requests responses from qualified sources capable of providing: *** Offers MUST be submitted by fax to 207-438-1251. Do NOT email your quotations. Emailed Quotations will NOT be considered for award*** CLIN 0001: Rubber Extruder, 2" Bore, Hot Feed in Accordance with the attached specifications. THE MANUFACTURER OF THIS MATERIAL MUST BE A SMALL BUSINESS. IF YOU ARE NOT THE ACTUAL MANUFACTURER, PLEASE CLEARLY INDICATE THE COMPANY THAT IS AND THEIR SIZE STATUS. CLARIFICATION ADDED ON 2/20/2015: FOR THE TWO BULLETS IN SECTION 5.1, CONTRACTORS DO NOT NEED TO PROVIDE THE ROLL GAP-DISTANCE BETWEEN ROLLS, OR THE FRICTION RATIO-ROLL SPEED RATIO. CLARIFICATION ADDED ON 3/18/2015: Normally the mechanic will cut the previous milled rubber into 1.5" to 2" strips, then hand feed them into the extruder (waist/chect height). There is no automatic feed needed for this extruder; all we need for this order is the extruder itself. OFFERORS ARE REQUIRED TO SUBMIT DESCRIPTIVE LITERATURE THAT SHOWS HOW THEIR PRODUCT MEETS ALL OF THE SPECIFICATIONS. FAILURE TO PROVIDE THIS INFORMATION MAY RESULT IN YOUR QUOTATION BEING CONSIDERED TECHNICALLY UNACCEPTABLE. Delivery Location is Portsmouth Naval Shipyard, Receiving Officer, Bldg 170, Code 501.2, Kittery, ME 03904. Responsibility and Inspection: unless otherwise specified in the order, the supplier is responsible for the performance of all inspection requirements and quality control. The following FAR provision and clauses are applicable to this procurement: Applicable FAR clauses: 52.203-3, 52.203-6, 52.204-4, 52.204-7, 52.204-10, 52.207-4, 52.209-6, 52.211-14, 52.211-15, 52.211-17, 52.212-1, 52.212-2, 52.212-3, 52.212-4, 52.212-5 (DEV), 52.216-1, 52.216-22, 52.216-27, 52-217-5, 52.217-6, 52.217-9, 52.219-6, 52-219-8, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.222-40, 52.222-54, 52.223-11, 52,223-18, 52.225-13, 225.227-7015, 52.232-18, 52.232-39, 52.233-1, 52.233-2, 52.242-15, 52.242-17, 52.246-1, 52.247-34, 52.252-1, 52.252-2, 52.252-5, 52.252-6, and 52.253-1. Under Clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items including: 52.204-10, 52.209-6, 52.217-4,, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.223-18, 52.225-13, 52.232-18, 52.232-39. Additional contract terms and conditions applicable to this procurement are: DFARS Clauses: 252.203-7000, 252.203-7002, 252.203-7005, 252.204-7003, 252.204-7004 (ALT A), 252.204-7006, 252.209-7004, 252.291-7003, 252.223-7008, 252.225-7002, 252.225-7012, 252.225-7020, 252.225-7021, 252.232-7003, 252.232-7006, 252.232-7010, 252.243-7001, 252.243-7002, 252.244-7000, 252.246-7000, and 252.247-7023. DLAD Provision: 52.215-9023. A reverse auction may be held for this requirement. This announcement will close at 02:30 PM EST on April 06, 2015. Contact Rachel Toracinta at 207-438-6818/Rachel.Toracinta@navy.mil. All responsible sources may submit a quote which shall be considered by the agency. To be awarded on an All or None basis. METHOD OF PROPOSAL SUBMISSION: The NECO website has a submit bid button next to the solicitation number. DO NOT use the submit bid button on NECO to submit your proposal. Offers MUST be submitted by fax to 207-438-1251. Do NOT email your quotations. Emailed Quotations will NOT be considered for award. System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed on-line at http://www.sam.gov/. Wide Area Work Flow (WAWF). Quoter's must be registered in WAWF to be considered for award unless government purchase card is utilized for procurement. Registration can be completed on-line at https://wawf.eb.mil. The WAWF Assistance Line is also available at 1-866-618-5988. All quotes shall include price(s) FOB Destination, a point of contact, name, email, fax, and phone number, GSA contract number if applicable, business size, country product of origin, place of manufacture, delivery time, payment terms, if registered in WAWF and/or if quoter accepts payment by Government Purchase Card. Quoter's shall include a completed copy of 52.212-3 and its ALT I with quotes unless vendor is registered in SAM. If registered, please so state on quote and affirm representations and certifications are up to date. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements. When submitting a quote it is very important that all offerors understand it is their responsibility to ensure they meet all requirements of the RFQ, not just those requirements stated in the specification such as terms and conditions, representations and certifications. The quote should not simply rephrase or restate the Government's requirements, but rather shall provide substantiation as to how the offeror intends to meet the requirements. ******* End of Combined Synopsis/Solicitation *******
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPMYM3-15-Q-3049/listing.html)
- Place of Performance
- Address: Kittery, Maine, 03904, United States
- Zip Code: 03904
- Zip Code: 03904
- Record
- SN03671447-W 20150320/150318234825-fb656311fd2d823a376737026c0df5a6 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |