Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF FEBRUARY 04, 2015 FBO #4820
MODIFICATION

20 -- FABRICATE VARIOUS BUOY COMPONENTS

Notice Date
2/2/2015
 
Notice Type
Modification/Amendment
 
NAICS
332999 — All Other Miscellaneous Fabricated Metal Product Manufacturing
 
Contracting Office
Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC), 2401 Hawkins Point Road, Building 31, Mail Stop 26, Baltimore, Maryland, 21226-5000, United States
 
ZIP Code
21226-5000
 
Solicitation Number
HSCG40-15Q-830400003
 
Archive Date
2/21/2015
 
Point of Contact
Robert Orofino, Phone: 410-762-6503, William H. Torfason, Phone: 410-762-6325
 
E-Mail Address
Robert.R.Orofino@uscg.mil, William.H.Torfason@uscg.mil
(Robert.R.Orofino@uscg.mil, William.H.Torfason@uscg.mil)
 
Small Business Set-Aside
Total Small Business
 
Description
The following questions were asked concerning this solicitation. Answers follow. Q) On CLIN 1 items #8 calls for the material to be steel. Is there a certain grade of steel that should be used? A36hot roll or 1018 cold roll or something else? A) CG specification P-420-0334 cites ASTM A36/A 36M, Requirements for Carbon Structural Steel, Shapes, Plates and Bars, which cites ASTM A6/A6M, Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling, regarding supplemental requirements. Apply the material chemical composition listed in Table 2, of A36, for hot-rolled carbon steel BARS. That composition of steel is acceptable for producing the buoy gong tapper assembly (NSN 2050-01-019-0107) tapper rod, item #8 in CG drawing 121159 Rev D. ___________________________________________________________ Exhibit #1, 2050-01-334-9293 1. We are quoting the short tapper assembly, correct? ANSWER: No. 2050-01-334-9293 is a short (25 inch) top mark stand. Use spec # P-420-0099 and drawing 121138 for this item. Please note: The short tapper assembly NSN is, 2050-01-025-3526. Use Spec P-420-0334 and drawing 121159 for the tapper. 2. Can we substitute 316 SS for the Wrought iron on Item#12 or does it have to be wrought iron? Is there any other material that could be used? ANSWER: Wrought iron is required for manufacturing item #12, small tapper ball, on drawing 121159, Buoy Bell and Gong Tappers. This material ensures that proper sound is produced when buoy bells and gongs are struck by the ball. Please note: There is no item #12 listed in materials on drawing 121138, Lantern Bridge and Top Mark Stands. Exhibit #2, 2050-01-334-9293 1. Are Items #6 and #7 to be included in our proposal? If so, we need more details. ANSWER: No. Item #6 and #7, on drawing 121138, are to be provided and attached to the stand by CG unit end users. 2. We are quoting the short stand, correct? ANSWER: That is correct, the short (25 inch) top mark stand. Use Spec P-420-0099 and drawing 121138. Exhibit #3, 5840-01-043-6233 1. For the top (Items #2 and #3) Could we quote this as (1) piece with no welding? Flanged only head ANSWER: Yes, you may quote material items #2, ring and #3, top plate from drawing 120316 as a single stamped piece. Note: You may also quote material items #4, ring and #5, bottom ring as one piece, if you have the capability of stamping the larger bottom plate. Note: Ensure the finished bend adheres to drawing 120316 Section C-C for the top plate and Section D-D for the bottom plate. Exhibit #4, 5840-01-261-9882 1. For the top (Items #2 and #3) Could we quote this as (1) piece with no welding? Flanged only head ANSWER: Yes, you may quote material items #2, top plate/bottom plate and #3, top flange/bottom flange from drawing 121024 as single stamped pieces. Note: Ensure the finished bend adheres to drawing 121024 Section A-A for the top plate and Section B-B for the bottom plate. Exhibit #5, 6117-01-334-9295 1. Are we to include Items #11 and #12 in our proposal? ANSWER: Yes. The stuffing tube and packing gland must be provided IAW Spec P-422-0377, Fabrication Of Aluminum Solar Panel Frames.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/USCGELC/HSCG40-15Q-830400003/listing.html)
 
Record
SN03630429-W 20150204/150202234531-e2ba66e6eddcda2d5630c9ecdd718033 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.