Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF NOVEMBER 26, 2014 FBO #4750
SOLICITATION NOTICE

59 -- IQC for Antenna

Notice Date

11/24/2014
 

Notice Type

Presolicitation
 

NAICS

334220 — Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing
 

Contracting Office

Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime - BSM, P O Box 3990, Columbus, Ohio, 43216-5000, United States
 

ZIP Code

43216-5000
 

Solicitation Number

SPE7MX15R0007
 

Point of Contact

Tracy S. Roberts, Phone: 6146922714
 

E-Mail Address

Tracy.Roberts@dla.mil
(Tracy.Roberts@dla.mil)
 

Small Business Set-Aside

N/A
 

Description

RESPONSE DATE: Offers/Responses are due prior to the Closing Date and Time specified in BLOCK 9 on Page 1 of the Solicitation/Request for Proposal (RFP). The solicitation will be available in DIBBS on or about its estimated issue date of December 10, 2014. DESCRIPTION: N SN(s): 5985-01-306-8110 Estimated Annual Quantity: 760 Each 5985-01-308-8988 Estimated Annual Quantity: 3355 Each Delivery to various DLA Stock location with phased deliveries. Both NSNs require First Article Test (FAT). Delivery with FAT is 300 days. Delivery if FAT is waived is 150 days. Item Description: NSN: 5985-01-306-8110 NAME: ANTENNA ELEMENT SQAP013068110 APPLIES MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). FULL AND OPEN COMPETITION APPLIES. IF THE APPLICABLE (OEM OR MILITARY) DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES AN ACCEPTABLE QUALITY LEVEL (AQL), THE SAMPLING ACCEPTANCE NUMBER SHALL BE REDUCED TO ZERO (0). FOR EXAMPLE, IF THE ACCEPT REJECT CRITERIA IS ACCEPT ON (3) DEFECTS AND REJECT ON (4) DEFECTS, THE NEW ACCEPT REJECT CRITERIA IS ACCEPT ON (0) DEFECTS AND REJECT THE ENTIRE LOT ON (1) DEFECT. EVEN THOUGH THE ACCEPTANCE LEVEL IS ELIMINATED, THE SAMPLE SIZE REMAINS THE SAME. DLAD 52.246-9004, PRODUCT VERIFICATION TESTING, APPLIES. THIS CLAUSE IS A GOVERNMENT OPTION THAT CAN ONLY BE INVOKED UPON THE COGNIZANT CONTRACT ADMINISTRATION OFFICE NOTIFYING THE CONTRACTOR THAT PVT SAMPLES ARE TO BE SELECTED. FIRST ARTICLE TEST REQUIREMENTS THIS SUPPLEMENTAL QUALITY ASSURANCE PROVISION (SQAP) DELINEATES THE FIRST ARTICLE AND PRODUCTION/ACCEPTANCE TEST REQUIREMENTS FOR NSN 5985-01-306-8110. THE FIRST ARTICLE TEST REQUIREMENTS SPECIFIED IN THIS SQAP ARE APPLICABLE WHEN FIRST ARTICLE TESTING IS SPECIFIED IN THE CONTRACT. THE PRODUCTION/ACCEPTANCE TEST REQUIREMENTS ARE APPLICABLE AT ALL TIMES. IDENTIFICATION: (80063) A3018230-1 APPLICABLE DOCUMENTS: (80063) A3148018 REV 'B' DTD 25 SEPT 1995 AND ALL ASSOCIATED DOCUMENTS. (80063) A3018230 REV 'E' DTD 30 APRIL 1997 AND ALL ASSOCIATED DOCUMENTS. THE FIRST ARTICLE SAMPLE SHALL BE MANUFACTURED IN THE SAME FACILITY WHICH WILL BE UTILIZED FOR THE PRODUCTION QUANTITIES OF THE CONTRACT. FIRST ARTICLE CONTRACTOR TESTING: CONTRACTOR SHALL TEST 9 SAMPLES IN ACCORDANCE WITH SECTIONS 4.4 THRU 4.8.5 OF (80063) A3148018 REV 'B' DTD 25 SEPT 1995 AS APPLICABLE TO REQUIREMENTS OF ARMY DRAWING A3018230 AND ALL APPLICABLE DOCUMENTS. FIRST ARTICLE TEST REPORTS: FIRST ARTICLE TEST REPORTS SHALL BE PROVIDED TO THE GOVERNMENT WITHIN 60 DAYS OF AWARD DATE OF THE CONTRACT. THE GOVERNMENT WILL HAVE 90 DAYS TO APPROVE/DISAPPROVE THE TEST REPORT. FIRST ARTICLE TEST REPORTS SHALL BE APPROVED BY THE COGNIZANT QAR. A COPY OF THE APPROVED TEST REPORT SHALL BE SENT TO THE CONTRACT ADMINISTRATOR LISTED ON THE CONTRACT. FIRST ARTICLE SAMPLE DISPOSITION: FIRST ARTICLE TEST SAMPLES SHALL BE RETAINED BY THE CONTRACTOR AND SHALL NOT BE SUBMITTED AS PART OF THE ORDER QUANTITY. FAT APPROVAL BY SIMILARITY: ANTENNAS OF SIMILAR CLASSIFICATION MANUFACTURED ON THE SAME PRODUCTION LINE INVOLVING THE SAME PROCESS, MAY BE GRANTED FAT APPROVAL BY THE ACQUIRING ACTIVITY PROVIDED THE MANUFACTURER ALREADY HAS A ANTENNA OF EQUAL OR GREATER COMPLEXITY WITH CURRENT FAT APPROVAL. IAW BASIC DRAWING NR 80063 A3018230 REVISION NR E DTD 04/30/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013007 REVISION NR E DTD 02/13/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013630 REVISION NR G DTD 08/19/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013657 REVISION NR L DTD 06/13/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013851 REVISION NR H DTD 08/17/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3014014 REVISION NR D DTD 08/05/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013848 REVISION NR K DTD 04/30/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018080 REVISION NR F DTD 04/30/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018418 REVISION NR B DTD 06/13/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3012675 REVISION NR DTD 06/29/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018230-1 REVISION NR D DTD 04/30/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 AG00000600 REVISION NR C DTD 06/04/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013845 REVISION NR G DTD 03/14/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013849 REVISION NR J DTD 04/06/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013660 REVISION NR H DTD 03/14/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018202 REVISION NR A DTD 12/13/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013115 REVISION NR AK DTD 07/12/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013122 REVISION NR J DTD 02/14/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013631 REVISION NR H DTD 06/22/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013850 REVISION NR F DTD 06/22/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018472 REVISION NR C DTD 06/13/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3148018 REVISION NR B DTD 09/29/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A313140 REVISION NR C DTD 06/12/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013078 REVISION NR C DTD 06/08/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013628 REVISION NR H DTD 04/06/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013629 REVISION NR H DTD 04/12/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013846 REVISION NR H DTD 03/14/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018053 REVISION NR D DTD 03/11/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018419 REVISION NR E DTD 04/30/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018230-1 REVISION NR DTD 01/18/2013 PART PIECE NUMBER: IAW REFERENCE QAP 16236 SQAP013068110 REVISION NR DTD 01/23/2013 PART PIECE NUMBER: NSN: 5985-01-308-8988 NAME: ANTENNA This item must be in compliance with the Reduction of Lead in Drinking Water Act of 2011, revised Section 1417 of the Safe Drinking Water Act (SDWA or Act). Compliance to the Reduction of Lead in Drinking Water Act was effective on January 4, 2014. This item is considered lead free, which means: (1) not containing more than 0.2 percent lead when used with respect to solder and flux; and (2) not more than a weighted average of 0.25 percent lead when used with respect to the wetted surfaces of pipes, pipe fittings, plumbing fittings, and fixtures. CRITICAL APPLICATION ITEM THE GOVERNMENT RESERVES THE RIGHT TO WAIVE THE REQUIREMENTS FOR FIRST ARTICLE TESTING FOR THOSE OFFERORS OF A PRODUCT WHICH HAS BEEN PREVIOUSLY ACCEPTED BY THE GOVERNMENT AND HAS NOT BEEN FOUND TO BE UNSATISFACTORY. MUST BE IAW ARMY (80063) DRAWING A3017899, REVISION "G", DTD 27 SEP 1995 SQAP013088988 APPLIES FIRST ARTICLE INSPECTION IS REQUIRED CONTRACTOR FAT APPLIES. PER FAR 52.209-3: (A) THE CONTRACTOR SHALL TEST 9 UNIT(S) PER DLAD 52.209-9017, ALT III DISPOSITION OF FIRST ARTICLES: FIRST ARTICLE TEST SAMPLES SHALL BE RETAINED BY THE CONTRACTOR AND SHALL NOT BE SUBMITTED AS PART OF THE ORDER QUANTITY. FULL AND OPEN COMPETITION APPLIES. IF THE APPLICABLE (OEM OR MILITARY) DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES AN ACCEPTABLE QUALITY LEVEL (AQL), THE SAMPLING ACCEPTANCE NUMBER SHALL BE REDUCED TO ZERO (0). FOR EXAMPLE, IF THE ACCEPT REJECT CRITERIA IS ACCEPT ON (3) DEFECTS AND REJECT ON (4) DEFECTS, THE NEW ACCEPT REJECT CRITERIA IS ACCEPT ON (0) DEFECTS AND REJECT THE ENTIRE LOT ON (1) DEFECT. EVEN THOUGH THE ACCEPTANCE LEVEL IS ELIMINATED, THE SAMPLE SIZE REMAINS THE SAME. THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE (ODS) IN THE DESIGN, MANUFACTURING, TESTING, CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM UNDER ANY MILITARY OR FEDERAL SPECIFICATION, STANDARD OR DRAWING REFERENCED IN THIS ITEM DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS OBTAINED. THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS. THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS DEFINED IN "FAR 11.001" OR TO PART-NUMBERED- ONLY ITEMS. THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATTLE CREEK, MI 49037-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25." MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). IAW BASIC DRAWING NR 80063 A3017899 REVISION NR G DTD 09/27/1995 PART PIECE NUMBER: A3017899-2 IAW REFERENCE DRAWING NR 80063 A3012887 REVISION NR D DTD 06/25/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013007 REVISION NR E DTD 02/13/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013141 REVISION NR G DTD 07/08/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013158 REVISION NR D DTD 08/05/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013159 REVISION NR E DTD 08/05/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013298 REVISION NR T DTD 08/05/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013630 REVISION NR G DTD 08/19/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013633 REVISION NR J DTD 06/10/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013657 REVISION NR L DTD 06/13/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013851 REVISION NR H DTD 08/17/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013863 REVISION NR F DTD 08/17/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013865 REVISION NR G DTD 08/17/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013870 REVISION NR H DTD 08/17/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013909 REVISION NR G DTD 08/17/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3014013 REVISION NR D DTD 08/05/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3014014 REVISION NR D DTD 06/18/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018495 REVISION NR C DTD 04/20/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018498 REVISION NR D DTD 06/03/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013841 REVISION NR H DTD 04/30/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013848 REVISION NR K DTD 04/30/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013866 REVISION NR H DTD 04/30/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018080 REVISION NR F DTD 04/30/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018219 REVISION NR F DTD 04/30/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018418 REVISION NR B DTD 06/13/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018433 REVISION NR B DTD 12/11/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018475 REVISION NR C DTD 01/04/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3017901 REVISION NR H DTD 04/29/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3017902 REVISION NR H DTD 01/03/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3017905 REVISION NR F DTD 04/30/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018218 REVISION NR H DTD 04/30/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018230 REVISION NR E DTD 04/30/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3012675 REVISION NR DTD 06/29/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3186822 REVISION NR DTD 04/14/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018230-1 REVISION NR D DTD 04/30/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3012992 REVISION NR K DTD 06/18/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013618 REVISION NR M DTD 06/06/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3017903-1 REVISION NR G DTD 09/26/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018215 REVISION NR F DTD 09/28/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018218-1 REVISION NR G DTD 09/27/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018492 REVISION NR E DTD 09/28/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018492-1 REVISION NR D DTD 10/02/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3186817 REVISION NR A DTD 09/29/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013129 REVISION NR K DTD 06/12/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3012966 REVISION NR C DTD 01/18/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013655 REVISION NR H DTD 03/11/2009 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3017899-2 REVISION NR DTD 10/26/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013124 REVISION NR J DTD 05/02/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013845 REVISION NR G DTD 03/14/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013849 REVISION NR J DTD 04/06/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013799 REVISION NR K DTD 06/29/1976 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013108 REVISION NR H DTD 09/23/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 MP-A37321 REVISION NR B DTD 01/04/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013552 REVISION NR AE DTD 02/10/2009 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013660 REVISION NR H DTD 03/14/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018074 REVISION NR A DTD 03/04/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3142167 REVISION NR A DTD 09/13/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3142195 REVISION NR C DTD 09/13/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3142196 REVISION NR C DTD 09/13/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3142246 REVISION NR A DTD 09/13/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018201 REVISION NR A DTD 12/13/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018202 REVISION NR A DTD 06/12/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018434 REVISION NR B DTD 12/13/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018438 REVISION NR A DTD 12/13/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018524 REVISION NR A DTD 12/13/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3019071 REVISION NR E DTD 12/13/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3019237 REVISION NR B DTD 12/13/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3186823 REVISION NR DTD 04/14/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3186824 REVISION NR DTD 04/14/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3186825 REVISION NR DTD 09/21/2006 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3186826 REVISION NR DTD 04/14/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013115 REVISION NR AK DTD 07/12/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013151 REVISION NR W DTD 08/21/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013122 REVISION NR J DTD 02/14/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013128 REVISION NR G DTD 09/23/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3211803 REVISION NR B DTD 03/23/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3211804 REVISION NR DTD 02/07/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013631 REVISION NR H DTD 06/22/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013850 REVISION NR F DTD 06/22/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013864 REVISION NR F DTD 06/06/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3017900 REVISION NR C DTD 06/10/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3017903 REVISION NR G DTD 09/28/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3017907 REVISION NR F DTD 09/27/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3017908 REVISION NR B DTD 01/07/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3017930 REVISION NR G DTD 05/19/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018024 REVISION NR H DTD 12/11/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018071 REVISION NR C DTD 06/13/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018072 REVISION NR C DTD 12/13/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018073 REVISION NR B DTD 06/13/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018086 REVISION NR D DTD 04/22/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018095 REVISION NR A DTD 06/13/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018220 REVISION NR C DTD 12/19/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018222 REVISION NR D DTD 08/19/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018231 REVISION NR D DTD 06/06/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018472 REVISION NR C DTD 06/13/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018473 REVISION NR B DTD 06/18/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018474 REVISION NR B DTD 06/21/1990 PART PIECE NUMBER: IW REFERENCE DRAWING NR 80063 A3018494 REVISION NR D DTD 11/27/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018494-1 REVISION NR C DTD 06/08/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3142168 REVISION NR C DTD 11/25/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3147948 REVISION NR B DTD 11/15/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3186821 REVISION NR DTD 04/15/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018534 REVISION NR L DTD 10/27/2007 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 AG0000600 REVISION NR C DTD 09/21/1955 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3014011 REVISION NR L DTD 12/21/2005 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3148018 REVISION NR B DTD 09/29/1995 PART PIECE NUMBER: IAW REFERENCE QAP 16236 SQAP013088988 REVISION NR DTD 10/12/2012 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013078 REVISION NR C DTD 06/08/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013628 REVISION NR H DTD 04/06/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013629 REVISION NR H DTD 04/12/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013846 REVISION NR H DTD 03/14/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018053 REVISION NR D DTD 03/11/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018419 REVISION NR E DTD 04/30/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 MP-A46387 REVISION NR DTD 01/10/2006 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013683 REVISION NR BK DTD 02/27/2007 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3013140 REVISION NR C DTD 06/12/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3018070 REVISION NR C DTD 06/13/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3210897 REVISION NR C DTD 04/07/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 A3017899-2 REVISION NR DTD 02/11/2014 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80063 E4GC201-007 REVISION NR DTD 05/29/1995 PART PIECE NUMBER: All responsible sources may submit an offer/quote which shall be considered. The solicitation document contains information that has been designated as "Militarily Critical Technical Data." Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid requirement may have a copy of the solicitation document. All requests for copies of the solicitation document must include a certified copy of DD Form 2345, Militarily Critical Technical Data Agreement. To obtain certification, contact: Commander, Defense Logistics Information Service (DLIS), ATTN: U.S./Canada Joint Certification Office, 74 Washington Avenue North, Battle Creek, MI 49017-3084 or call the DLIS at (800)-352-3572. The DLIS Unites States/Canada Joint Certification Lookup service is available via the Internet at: http://www.dlis.dla.mil/ccal/. Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Product Lists, Military Handbooks, and other standardization documents from the DoD Single Stock Point (DODSSP), in Philadelphia, PA. Most documents are available in Adobe PDF format from the ASSIST database via the Internet at http://assist.daps.dla.mil/. Users may search for documents using the ASSIST-Quick Search and, in most cases, download the documents directly via the Internet using standard browser software. Documents not available for downloading from ASSIST can be ordered from the DODSSP using the ASSIST Shopping Wizard, after establishing a DODSSP Customer Account by following the registration procedures or by phoning the DoDSSP Special Assistance Desk at (215) 697-6396/6257 (DSN: 442-6396/6257). Users not having access to the Internet may contact the DODSSP Special Assistance Desk at (215) 697-6396/6257 (DSN: 442-6396/6257) or mail requests to the DODSSP, Bldg. 4/D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. Patterns, Drawings, Deviations Lists, Purchase Descriptions, etc., are not stocked at the DODSSP. One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. Drawings/specifications will be available through the DIBBS solicitation link in the synopsis on the solicitation issue date. The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government. The total duration (base plus option years) shall not exceed _5_ years. While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC-BSM/SPE7MX15R0007/listing.html)
 

Record

SN03580863-W 20141126/141124234640-bfd7e32bb788c2fb648f173887ce1d6e (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |