Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF NOVEMBER 14, 2014 FBO #4738
SOLICITATION NOTICE

51 -- RFQ 5180-00-752-9359 - RFQ

Notice Date

11/12/2014
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

332216 — Saw Blade and Handtool Manufacturing
 

Contracting Office

General Services Administration, Federal Acquisition Service (FAS), FMHAC & HSOC, 1500 East Bannister Road, Kansas City, Missouri, 64131, United States
 

ZIP Code

64131
 

Solicitation Number

RFQ-5180-00-752-9359
 

Archive Date

11/29/2014
 

Point of Contact

Katie Norton, Phone: 8169263582
 

E-Mail Address

katie.norton@gsa.gov
(katie.norton@gsa.gov)
 

Small Business Set-Aside

N/A
 

Description

RFQ REQUEST FOR QUOTATION RFQ-5180-00-752-9359 November 12, 2014 United States of America GSA Global Supply 1500 E. Bannister Road Kansas City, Missouri 64131 Phone: (816) 926-3582 Email: katie.norton@gsa.gov FOR INFORMATION, PLEASE CONTACT: Katie Norton Please submit your response by close of business Friday November 14, 2014 via the above email. Important: This is a request for quotations, and quotations furnished are not offers. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation, or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. If you are unable to quote, please so indicate on this form and return. Please review the attached item purchase description(s). Delivery shall be FOB Destination. Shipment time ____________________ARO (After receipt of order) Price is valid through ____________________________ Vendor's Minimum Order Amount, if any:___________________ Business size: Large _______ or Small ________ Vendor's DUNS Number: ____________________________________ Name & address of vendor and signature of quoter: Name:_____________________________________________________ Address:___________________________________________________ City:_________________________________ State:________________ Telephone: _____________________________FAX: _________________ Print name:___________________________________________________ Signature:____________________________________ Date:_________ PLEASE NOTE: Effective October 1, 2003 all vendors seeking to do business with the Federal Government are required to register with the Central Contract Registration at www.ccr.gov. If you are not registered and are not willing to register we will not be able make an award to your firm. Return pages 1 and 2. Failure to return all pages will result in your quote being removed from consideration. Please provide pricing for the following NSN(s). See description(s) below. NSN QTY Unit price 5180-00-752-9359 5 5180-00-752-9359 Ver.: 20 UI: SE THREADING SET, SCREW: The following header paragraph(s) shall apply to the item purchase description(s) where applicable. If there is a conflict between the item purchase description and the header paragraph(s), the header paragraph(s) shall take precedence over the item purchase description. Notwithstanding the requirements specified herein, cadmium plating is not acceptable. In the event no alternative coating, finish, or plating is specified, a rust preventative finish as used in standard commercial practice shall apply. When chromium plating or finish is specified and the manufacturer has a commercial coating of the same color and texture of chromium that the manufacturer uses in lieu of chromium; then the alternative coating can be used, provided the coating meets Aerospace Standard SAE AS4984. Each set or kit shall contain a dated parts list or packing list citing the GSA contract number (if applicable), GSA purchase order number, date of purchase order, kit national stock number (NSN), each component NSN (if applicable), kit noun name, each component noun name, and quantity of each component. Unless otherwise specified in the item purchase description, each kit or set and each component of the kit or set shall have, in addition to any other required marking, identification marking indicating the manufacturer's name or identifying symbol, and the state or country of manufacture. The marking shall be engraved, etched, or stamped in such a manner that it will be permanent to the extent that it will remain clear and legible throughout the life of the item. Workmanship: Details of workmanship shall be in accordance with the best commercial standards and practices. Paints, coatings, platings, and finishes shall be smooth, adherent, continuous, and not stained or discolored. Fasteners shall be firmly secured and show no evidence of deformation, cross threading, or hazardous burrs. Adhesives and lubricants adequate for their intended purpose shall be properly and neatly applied. Adhesives shall be adequately cured. Wires and cables shall be neatly dressed and shall not be frayed or in contact with sharp edges. Wire and cable insulation shall show no evidence of burns, abrading, or pinch marks. There shall be no interference, binding, or galling of parts. External and bearing surfaces shall be free of tool and gouge marks, nicks, or other surface imperfections. The item shall be clean and free of corrosion and debris (e.g. chips shavings, slivers) or other foreign material. The item shall be free from manufacturing workmanship defects (e.g., loose, missing, binding or misaligned parts, sharp or rough external edges, corners or surfaces) and material defects (e.g., pits, rips, fins, burrs, tears, nodules, cracks, blisters) which may adversely impact the item's serviceability, durability, safety, or appearance. DESCRIPTION Set shall be furnished in an impact resistant plastic, metal or wood case and shall be provided with cutouts, trays or inserts and so arranged that the components cannot come in contact with each other, thus preventing any damage to the cutting edges and allowing for easy selection. When case is either plastic or metal, lid shall be padded with a petroleum resistant padding, attached to inside of lid, to keep taps and dies from moving during shipment and handling. Wooden case material shall be well seasoned hard wood (plywood is unacceptable). When wood cutouts are provided finger notches/indentions are required allowing for easy removal of tools during use. Empty compartments in cutouts/inserts are unacceptable. Cases shall have a smooth finish with a moisture resistant coating of paint, clear lacquer or varnish. The case shall consist of a body, hinged lid, and a latch for securing the lid in a closed position. A listing of components with a transparent protective cover/coating to preserve the listing shall be furnished in the kit, secured to the inside of the case lid. Exception to Quantity Quantity shall be 1 each for the following NSNs as a component of this kit: 5136-00-239-2775, 5136-00-239-2777, 5136-00-239-2778, 5136-00-239-2779, 5136-00-239-2780, 5136-00-221-1236, 5136-00-729-5686, 5136-00-821-1027, 5136-00-825-0332, 5136-00-729-5684, 5136-00-821-1030, 5136-00-228-1040, 5136-00-729-5695, 5136-00-729-5694, 5136-00-585-6760, 5136-00-221-7874, 5136-00-729-5689, 5136-00-580-7316, 5136-00-232-1974, 5136-00-580-7327, 5136-00-580-7357, 5210-00-203-7763, 5210-00-221-1893, 5120-00-277-4069 Quantity shall be 2 each for the following NSNs as a component of this kit: 5133-00-227-9658, 5133-00-189-9246, 5133-00-189-9254, 5133-00-189-9261, 5133-00-189-9262, 5133-00-189-9270, 5133-00-189-9272, 5133-00-189-9274, 5133-00-189-9281, 5133-00-189-9288 See Technical Specifications paragraph(s): T2.4, T3.1, T4.1 and T6.1 List of Components of 5180-00-752-9359: 1. 5136-00-239-2775 Qty: 1 UI: EA DIE, THREAD CUTTING DESCRIPTION Style Designator: Round split with internal adjusting screw Thread Size, Pitch, Series: 4-40UNC Diameter: 13/16 inch Thickness: 1/4 inch Thread Direction: Right-hand Material: High Speed Steel See Technical Specifications paragraph(s): T1.2 2. 5136-00-239-2777 Qty: 1 UI: EA DIE, THREAD CUTTING: DESCRIPTION Style Designator: Round Split with Internal Adjusting Screw Thread Size, Pitch, Series: 6-32 UNC Thread Pitch Diameters: 0.1141 / 0.1169 inches Thread Direction: Right Hand Outside Diameter: 13/16 inch Thickness: 1/4 inch Material: High Speed Steel See Technical Specifications paragraph(s): T1.2 3. 5136-00-239-2778 Qty: 1 UI: EA DIE, THREAD CUTTING: DESCRIPTION Style Designator: Round split with internal adjusting screw. Thread Size, Pitch and Series: 8-32 UNC Outside Diameter: 13/16 inches Thickness: 5/8 inch Thread Direction: Right-hand Material: High Speed Steel See Technical Specifications paragraph(s): T1.2 4. 5136-00-239-2779 Qty: 1 UI: EA DIE, THREAD CUTTING: DESCRIPTION Style Designator: Round split with internal adjusting screw. Thread Pitch Diameters: 0.1586 to 0.1629 inches Thread Size and Series: 10-24 UNC Outside Diameter: 13/16 inch Thickness: 1/4 inch Thread Direction: Right-hand Material: Steel, High Speed overall See Technical Specifications paragraph(s): T1.2 5. 5136-00-239-2780 Qty: 1 UI: EA DIE, THREAD CUTTING DESCRIPTION Style designator: Round split with internal adjusting screw Thread Size, Pitch And Series: 12-24-UNC Outside Diameter: 13/16 inch Thickness: 1/4 inch Thread Direction: Right-hand Material: High Speed Steel See Technical Specifications paragraph(s): T1.2 6. 5136-00-221-1236 Qty: 1 UI: EA DIESTOCK: DESCRIPTION Die diameter size accommodated: 13/16 inch Die thickness accommodated: 1/4 inch Overall length: 6 inches minimum, 8 inches maximum. Die shape for which designed: Round Guide Adjustability: Adjustable Handle Quantity: 2 Special features: Handles 180 degrees apart Material: Steel See Technical Specifications paragraph(s): T1.5 7. 5136-00-729-5686 Qty: 1 UI: EA TAP, THREAD CUTTING DESCRIPTION Type: Standard Straight Thread Thread Size-Series: 4-40 UNC Pitch Diameter Limits: (H2) 0.0963/ 0.0968 in. Chamfer Type: Taper Thread Form Method: Ground Style Designator: Straight flute Thread Direction: Right-Hand Flute Quantity: 3 Material: High Speed Steel See Technical Specifications paragraph(s): T1.4 8. 5136-00-821-1027 Qty: 1 UI: EA TAP, THREAD CUTTING DESCRIPTION Type: Standard Straight Thread Thread Size-Series: 0.138-32 UNC (6-32 UNC) Pitch Diameter: (H2), 0.1182/0.1187 in. Chamfer Type: Taper Thread Form: Ground Thread Direction: Right-hand Flute Quantity: 3 Style: Straight flute Material: High Speed Steel See Technical Specifications paragraph(s): T1.4 9. 5136-00-825-0332 Qty: 1 UI: EA TAP, THREAD CUTTING DESCRIPTION Type: Standard Straight Thread Thread Size-Series: 0.164-32 UNC Pitch Diameter Limits: (H2) 0.1442/ 0.1447 in. Chamfer Type: Taper Thread Form Method: Ground Style Designator: Straight flute Thread Direction: Right-Hand Flute Quantiy: 4 Material: High Speed Steel See Technical Specifications paragraph(s): T1.4 10. 5136-00-729-5684 Qty: 1 UI: EA TAP, THREAD CUTTING DESCRIPTION Type: Standard Straight Thread Thread Size-Series: 10-24 UNC Pitch Diameter Limits: (H2) 0.1634/ 0.1639 inch Chamfer Type: Taper Thread Form Method: Ground Style Designator: Straight flute Thread Direction: Right-Hand Flute Quantity: 4 Material: High Speed Steel See Technical Specifications paragraph(s): T1.4 11. 5136-00-821-1030 Qty: 1 UI: EA TAP, THREAD CUTTING DESCRIPTION Type: Standard Straight Thread Thread Size-Series: 0.216-24 UNC Pitch Diameter: See Below Chamfer Type: Taper Thread Form: Ground Style: Straight flute Thread Direction: Right-hand Flute Quantity: 4 Material: High Speed Steel EXCEPTION TO SPECIFICATION: Pitch Diameter Limits shall be: Min: 0.1894"; Max: 0.1899", H2. See Technical Specifications paragraph(s): T1.4 12. 5136-00-228-1040 Qty: 1 UI: EA TAP, THREAD CUTTING DESCRIPTION Type: Standard Straight Thread Thread Size-Series: 4-40 UNC Pitch Diameter Limits: (H2) 0.0963/ 0.0968 inch Chamfer Type: Plug Thread Form Method: Ground Style Designator: Straight Flute Thread Direction: Right-Hand Flute Quantiy: 3 Material: High Speed Steel See Technical Specifications paragraph(s): T1.4 13. 5136-00-729-5695 Qty: 1 UI: EA TAP, THREAD CUTTING DESCRIPTION Type: Standard Straight Thread Thread Size-Series: 6-32 UNC Pitch Diameter: (H2) 0.1182/ 0.1187 inch Chamfer Type: Plug Thread Form: Ground Style: Straight flute Thread Direction: Right-hand Flute Quantity: 3 Material: High Speed Steel See Technical Specifications paragraph(s): T1.4 14. 5136-00-729-5694 Qty: 1 UI: EA TAP, THREAD CUTTING DESCRIPTION Type: Standard Straight Thread Thread Size-Series: 8-32 UNC Pitch Diameter: (H2) 0.1442/ 0.1447 inch Chamfer Type: Plug Thread Form: Ground Style: Straight flute Thread Direction: Right-hand Flute Quantity: 4 Material: High Speed Steel See Technical Specifications paragraph(s): T1.4 15. 5136-00-585-6760 Qty: 1 UI: EA TAP, THREAD CUTTING DESCRIPTION Type: Standard Straight Thread. Thread Size-Series: 10-24 UNC Thread Pitch Diameter: (H2) 0.1634/ 0.1639 inches Chamfer Type: Plug Thread Form: Ground Style Designator: Straight flute Thread Direction: Right-Hand. Flute Quantity: 4 Material: High Speed Steel. See Technical Specifications paragraph(s): T1.4 16. 5136-00-221-7874 Qty: 1 UI: EA TAP, THREAD CUTTING DESCRIPTION Type: Standard Straight Thread Thread Size-Series: 12-24 UNC Pitch Diameter: See below Chamfer Type: Plug Thread Form: Ground. Style Designator: Straight flute Thread Direction: Right-Hand. Flute Quantity: 4 Material: High Speed Steel. EXCEPTION TO STANDARD Thread Pitch diameter:(H2) 0.1894" to 0.1899". See Technical Specifications paragraph(s): T1.4 17. 5136-00-729-5689 Qty: 1 UI: EA TAP, THREAD CUTTING DESCRIPTION Type: Standard Straight Thread Thread Size-Series: 4-40 UNC Thread Pitch Diameter: (H2) 0.0963/ 0.0968 inch Chamfer Type: Bottoming Thread Form Method: Ground Style Designator: Straight Flute Thread Direction: Right-Hand Flute Quantiy: 3 Material: High Speed Steel See Technical Specifications paragraph(s): T1.4 18. 5136-00-580-7316 Qty: 1 UI: EA TAP, THREAD CUTTING DESCRIPTION Type: Standard Straight Thread Thread Size-Series: 6-32 UNC Thread Pitch Diameter: (H2) 0.1182/ 0.1187 inch Chamfer Type: Bottoming Thread Form Method: Ground Style Designator: Straight Flute Thread Direction: Right-Hand Flute Quantiy: 3 Material: High Speed Steel See Technical Specifications paragraph(s): T1.4 19. 5136-00-232-1974 Qty: 1 UI: EA TAP, THREAD CUTTING DESCRIPTION Type: Standard Straight Thread Thread Size-Series: 8-32 UNC Thread Pitch Diameter: (H2) 0.1442/ 0.1447 inch Chamfer Type: Bottoming Thread Form Method: Ground Style Designator: Straight Flute Thread Direction: Right-Hand Flute Quantiy: 4 Material: High Speed Steel See Technical Specifications paragraph(s): T1.4 20. 5136-00-580-7327 Qty: 1 UI: EA TAP, THREAD CUTTING DESCRIPTION Type: Standard Straight Thread Thread Size-Series: 10-24 UNC Thread Pitch Diameter: (H2) 0.1634/ 0.1639 inch Chamfer Type: Bottoming Thread Form Method: Ground Style Designator: Straight Flute Thread Direction: Right-Hand Flute Quantiy: 4 Material: High Speed Steel See Technical Specifications paragraph(s): T1.4 21. 5136-00-580-7357 Qty: 1 UI: EA TAP, THREAD CUTTING DESCRIPTION Type: Standard Straight Thread Thread Size-Series: 12-24 UNC Chamfer Type: Bottoming Thread Form Method: Ground Style Designator: Straight Flute Thread Direction: Right-Hand Flute Quantiy: 4 Material: High Speed Steel EXCEPTION TO SPECIFICATION: Pitch Diameter Limits shall be: Min: 0.1894; Max: 0.1899", H2. See Technical Specifications paragraph(s): T1.4 22. 5133-00-227-9658 Qty: 1 UI: DZ DRILL, TWIST: DESCRIPTION Shank Diameter: 0.250 inch Shank Style: Straight Round Overall Length: 4.000 inches Cutting End Style: General Purpose Cutting Diameter: 0.2500 inch Cutting Rotation Direction: Right-Hand Flute Length: 2.750 inches Flute Quantity: 2 Point Type: Conventional Point Angle: 118.0 Degrees Special Features: Jobbers Length: Fractional Size - 1/4 inch Material: High Speed Steel. See Technical Specifications paragraph(s): TE.6, T1.3, T2.2 and T3.2 23. 5133-00-189-9246 Qty: 1 UI: DZ DRILL, TWIST DESCRIPTION Shank Style: Straight round. Cutting Diameter: Wire size number 1 (0.228 in.). Cutting Style: General Purpose. Cutting Rotation: Right-hand cut. Point Type: Conventional. Point Angle: 118 degrees. Flute Style: Two-flute. Flute Length: 2-5/8 in. Overall Length: 3-7/8 in. Material: High speed steel. Feature: Jobbers length. See Technical Specifications paragraph(s): T1.3, T2.2, T2.3 and T3.2 24. 5133-00-189-9254 Qty: 1 UI: DZ DRILL, TWIST DESCRIPTION Shank Style: Straight round. Cutting Diameter: Wire size 9. Cutting Style: General Purpose. Cutting Rotation: Right-hand cut. Point Type: Conventional. Point Angle: 118 degrees. Flute Style: Two-flute. Flute Length: 2-7/16 in. Overall Length: 3-5/8 in. Material: High speed steel. Feature: Jobbers length. See Technical Specifications paragraph(s): T1.3, T2.2 and T3.2 25. 5133-00-189-9261 Qty: 1 UI: DZ DRILL, TWIST: DESCRIPTION Shank Diameter: 0.177 inches Shank Style: Straight Round Overall Length: 3.375 inches Cutting End Style: General Purpose Cutting Diameter: 0.1770 inches Cutting Rotation Direction: Right-Hand Flute Length: 2.188 inches Flute Quantity: 2 Point Type: Conventional Point Angle: 118.0 Degrees Special Features: Jobbers Length: Wire Gage Size - 16 Material: High Speed Steel. See Technical Specifications paragraph(s): T1.3, T2.2 and T3.2 26. 5133-00-189-9262 Qty: 1 UI: DZ DRILL, TWIST DESCRIPTION Shank Style: Straight round. Cutting Diameter: Wire size 17. Cutting Style: General Purpose. Cutting Rotation: Right-hand cut. Point Type: Conventional. Point Angle: 118 degrees. Flute Style: Two-flute. Flute Length: 2-3/16 in. Overall Length: 3-3/8 in. Material: High speed steel. Feature: Jobbers length. See Technical Specifications paragraph(s): T1.3, T2.2 and T3.2 27. 5133-00-189-9270 Qty: 1 UI: DZ DRILL, TWIST: DESCRIPTION Shank Style: Straight round. Cutting Diameter: Wire size 25. Cutting Style: General Purpose. Cutting Rotation: Right-hand cut. Point Type: Conventional. Point Angle: 118 degrees. Flute Style: Two-flute. Flute Length: 1-7/8 in. Overall Length: 3 in. Material: High Speed Steel. Feature: Jobbers length. See Technical Specifications paragraph(s): T1.3, T2.2 and T3.2 28. 5133-00-189-9272 Qty: 1 UI: DZ DRILL, TWIST DESCRIPTION Shank Style: Straight round. Cutting Diameter: Wire size 27. Cutting Style: General Purpose. Cutting Rotation: Right-hand cut. Point Type: Conventional. Point Angle: 118 degrees. Flute Style: Two-flute. Flute Length: 1-7/8 in. Overall Length: 3 in. Material: High Speed Steel Feature: Jobbers length See Technical Specifications paragraph(s): T1.3, T2.2 and T3.2 29. 5133-00-189-9274 Qty: 1 UI: DZ DRILL, TWIST DESCRIPTION Shank Style: Straight round. Cutting Diameter: Wire size number 29 (0.136"). Cutting Style: General Purpose. Cutting Rotation: Right-hand cut. Point Type: Conventional. Point Angle: 118 degrees. Flute Style: Two-flute. Flute Length: 1-3/4 in. Overall Length: 2-7/8 in. Material: High Speed Steel Feature: Jobbers length See Technical Specifications paragraph(s): T1.3, T2.2 and T3.2 30. 5133-00-189-9281 Qty: 1 UI: DZ DRILL, TWIST DESCRIPTION Shank Style: Straight round. Cutting Diameter: Wire size 36. Cutting Style: General Purpose. Cutting Rotation: Right-hand cut. Point Type: Conventional. Point Angle: 118 degrees. Flute Style: Two-flute. Flute Length: 1-7/16 in. Overall Length: 2-1/2 in. Material: High Speed Steel Feature: Jobbers length See Technical Specifications paragraph(s): T1.3, T2.2 and T3.2 31. 5133-00-189-9288 Qty: 1 UI: DZ DRILL, TWIST DESCRIPTION Shank Diameter: 0.089 In. Cutting Diameter: Wire Size 43 Shank Style: Straight Round Overall Length: 2.250 In. Cutting End Style: General Purpose Cutting Rotation Direction: Right-Hand Flute Length: 1.250 In. Flute Quantity: 2 Point Type: Conventional Hardness Rating: Not Rated Point Angle: 118.0 Degrees Special Features: Jobbers Length Material: Steel, High Speed Overall See Technical Specifications paragraph(s): T1.3, T2.2 and T3.2 32. 5210-00-203-7763 Qty: 1 UI: EA GAGE, SCREW PITCH: DESCRIPTION The screw pitch gages shall consist of a specific number of blades and a metal case into which the blades fold. Blades - Blades shall be flat, and have uniform thickness of not less than 0.023 inch and shall made of stainless steel satin finish or cold rolled steel. The teeth shall be uniformly, cleanly, and accurately formed. The blade surfaces shall be finished to a surface roughness not to exceed 32 micro inches AA. Each blade shall be plainly and permanently marked with the respective number of threads per inch. Each blade shall be of narrow width design suitable for checking the threads of nuts, screws, and bolts. The length of engagement of the teeth shall be not less than 1/2 inch. Blades shall have a Rockwell hardness of 91 to 95 on the B scale. The profile of the teeth shall be as follows: The angle of the tooth shall be 60 degrees with the bisector of the angle perpendicular to the toothed edge of the blade. The blades shall have a tolerance on the half-angle of the tooth of plus or minus 1 degree for 1/20 pitch and coarser and plus or minus 2 degrees for pitches finer than 1/20 pitch. The tolerance on pitch shall be plus or minus 0.0010 inch between any two successive teeth and plus or minus 0.005 inch in the overall length of the blade. The truncation of the crest of each tooth shall result in a flat having a width equal to not less than 0.20 times the pitch nor more than 0.30 times the pitch of the blade. The roots of the tooth spaces shall be cut to either a sharp V, or be cleaned to a truncation not to exceed 0.033 times the pitch of the thread or 0.002 inch, whichever, depending on the pitch. The blades shall consist of 51 blades, one blade for each of the following number of threads per inch: 4, 4-1/2, 5, 5-1/2, 6, 7, 8, 9, 10, 11, 11-1/2, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82, and 84. Case - The case shall be made of mild steel, not less than 0.030 inch thick and shall enclose the edges of all blades. Unless otherwise specified the hinged ends of the case shall have metal screws and locknuts for clamping any or all blades in any opened position. Clamping screws shall be removable. The ends of the case shall be fully rounded. Cases shall be notched through both sides of one edge at hinge to facilitate access to leaves. When specified in the ordering data, double depth of threads shall be clearly and permanently marked on side of case. Locknut - the nut shall be made of steel. The edge of the nut shall be knurled or serrated and shall be designed to be comfortable to the feel and easy to operate. The nut shall be not less than 3/32 inch thick and no smaller in diameter than the full width of the case at the hinge. An arrow indicating locking direction shall be shown on the face of the nut. The screw pitch gage shall conform to the following design requirements: Screw Pitch. Angle of teeth 60 degrees. 51 blades (range 4 to 84 threads per inch). 33. 5210-00-221-1893 Qty: 1 UI: EA GAGE, TWIST DRILL AND DRILL ROD DESCRIPTION The gage shall be rectangular in shape. The gaging sections shall be four rows of holes and shall correspond to diameters of twist drills and drill rod from number 1 to 60, as specified in Table A. The gage numbers corresponding to the proper diameter of the drill and drill rod shall be plainly stamped opposite each hole and either side of the gage shall be neatly and uniformly marked near each hole with the corresponding decimal equivalents, designated by at least a three decimal figure in accordance with the manufacturer's commercial practice. The gages shall be approximately 5-1/2 in. long, 1-1/2 in. wide, and shall be not less than 0.070 in. thick. Gaging size range. 1 to 60. The gaging sections shall consist of cylindrical holes in the gage that shall correspond to thickness or diameters as shown in Table A. Holes shall be round and straight with tolerances specified in Table A. Material. The materials used in construction of the gages shall be steel, alloy tool steel, carbon steel, or stainless steel. Finish. All finishes exterior surfaces of gages shall be such that surface roughness lies within the limits of 8 to 63 micro inches roughness height rating. Hardness. Gages shall be either hardened to 58 to 65 on the Rockwell C scale, or case hardened (0.005-inch minimum depth) to 88 to 93 on the Rockwell 15 N superficial scale. Temperature. The dimensions of the gages shall be within the limits specified at a temperature of 68 degrees Fahrenheit (F) (20 degrees Celsius [C] ). Tolerance of overall dimensions. All dimensions referred to as approximate shall be interpreted as permitting a tolerance of plus or minus ten percent. See Technical Specifications paragraph(s): T2.1 34. 5120-00-277-4069 Qty: 1 UI: EA WRENCH, TAP AND REAMER: DESCRIPTION Tap capacity range: No. 0 to 1/4 inch Tap Size range: 0.060 inch to 0.250 inch Overall Length: 2.500 inch minimum Material: Steel See Technical Specifications paragraph(s): TE.6, T1.1 End of 5180-00-752-9359 Components List _______________________________________________________________ TECHNICAL SPECIFICATIONS TECHNICAL DOCUMENT T1.1 Wrench shall be of the sliding T-handle and adjustable sleeve. The T-handle shall be utilized for applying torque to the wrench during the tapping and reaming operations. The adjusting sleeve shall be used to adjust the jaws for gripping and holding the taps and reamers. Body: The wrench body shall be steel; shall include integral jaws or inserted jaws and shall be threaded for assembly of an adjusting sleeve. The top round section of the body shall be drilled 90 degrees to the vertical axis to accommodate the handle. The top surface of the body shall contain a 60-degree, countersunk center for use with machine centers. Jaws: If of the inserted jaw types; springs shall hold the jaws firmly against the tapered bearing surface of the adjusting sleeve. Inserted jaws shall not become separated when the adjusting sleeve is removed. The jaws shall be hardened to Rockwell C50 to C58. Adjusting sleeve: The sleeve shall be threaded internally for assembly to the body. The inside sleeve surface shall have a hardened, tapered bearing surface which contacts the jaws. The outside surface shall be knurled. The sleeve shall be hardened to Rockwell C50 to 55, except that the sleeve need not be hardened if the design is such that the jaws are affixed to the springs and are held within the sleeve by spring pressure. Handle: The handle shall consist of a straight, round, steel rod and shall be assembled to the body to form a T-handle with both ends designed to keep it from falling out. The handle shall be adjustable and designed to be locked in the center position, or it may be adjustable and designed to be held in any position by friction. Applies to item(s): 34 T1.2 In accordance with Commercial Item Description A-A-410 Notice 2, dated August 9, 2005. Applies to item(s): 1, 2, 3, 4 and 5 T1.3 In accordance with American Society of Mechanical Engineers (ASME) B94.11M-1993. Applies to item(s): 22, 23, 24, 25, 26, 27, 28, 29, 30 and 31 T1.4 In accordance with American Society of Mechanical Engineer (ASME) B94.9-2008, "Taps: Ground Thread with Cut Thread Appendix (Inch and Metric Sizes)". Applies to item(s): 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 and 21 T1.5 Two-handled diestock for use with adjustable, round, split dies. Design: The diestock shall be designed with a machined recess in the center portion to accept the die and have two handles, 180 degrees apart, extending on either side. The side of the recess shall be tapped for three setscrews 90 degrees apart. Two setscrews with oval points shall be furnished in the tapped holes located 180 degrees apart, and one setscrew with a 90 degree cone point shall be furnished in the center tapped hole. Handles: Each handle shall be of size and shape as to afford a comfortable handgrip and shall be of such strength as to withstand, without permanent deformation, the torque required to cut the largest size threads within the die capacity of the diestock. Applies to item(s): 6 EXCEPTION(S) TO TECHNICAL DOCUMENT T2.1 Table A Thickness or diameters corresponding to gage numbers of sizes 1 through 80 for twist drill, drill rod, and machine screw tap gages: Gage number Inch Gage number Inch or sizes or sizes -------------------------------------------------------------- 1.2280 41.0960 2.2210 42.0935 3.2130 43.0890 4.2090 44.0860 5.2055 45.0820 6.2040 46.0810 7.2010 47.0785 8.1990 48.0760 9.1960 49.0730 10.1935 50.0700 11.1910 51.0670 12.1890 52.0635 13.1850 53.0595 14.1820 54.0550 15.1800 55.0520 16.1770 56.0465 17.1730 57.0430 18.1695 58.0420 19.1660 59.0410 20.1610 60.0400 21.1590 61.0390 22.1570 62.0380 23.1540 63.0370 24.1520 64.0360 25.1495 65.0350 26.1470 66.0330 27.1440 67.0320 28.1405 68.0310 29.1360 69.0292 30.1285 70.0280 31.1200 71.0260 32.1160 72.0250 33.1130 73.0240 34.1110 74.0225 35.1100 75.0210 36.1065 76.0200 37.1040 77.0180 38.1015 78.0160 39.0995 79.0145 40.0980 80.0135 Tolerances for Table A. All sizes are plus.0010 inch and minus.0000 inch. -------------------------------------------------------------- Table B Diameters corresponding to fractional and letter size gages: Nominal Inch Nominal Inch size letter -------------------------------------------------------------- 1/16.062 A.234 5/64.078 B.238 3/32.093 C.242 7/64.104 D.246 1/8.125 E.250 9/64.140 F.257 5/32.156 G.261 11/64.171 H.266 3/16.187 I.272 13/64.203 J.277 7/32.218 K.281 15/64.234 L.290 1/4.250 M.295 17/64.265 N.302 9/32.281 O.316 19/64.296 P.323 5/16.312 Q.332 21/64.328 R.339 11/32.343 S.348 23/64.359 T.358 3/8.375 U.368 25/64.390 V.377 13/32.406 W.386 27/64.421 X.397 7/16.437 Y.404 29/64.453 Z.413 15/32.468 31/64.484 1/2.500 Tolerances for Table B. All sizes are plus.0015 inch and minus.0000 inch. Applies to item(s) : 33 T2.2 Add the following requirements to ASME B94.11M: The twist drill flute and shank hardness shall be as follows: Flute Hardness. Drills 5/64 inch and smaller shall have a flute hardness from the drill point to 75 percent or more of the flute length shall be Knoop microhardness 799-870. Drills larger than 5/64 inch shall have a flute hardness from the drill point to 75 percent or more of the flute length shall be 63-66 HRc. Shank hardness. Straight shank and Morse shank Drills: Drills 1/2 inch and smaller shall have a shank hardness between the mid-point of the shank and the end of the shank shall be 18-45 HRc. Drills over 1/2 inch shall have a shank hardness between the mid-point of the shank and the end shall be 80 HRb greater. Straight shank drills 6 inch or longer overall length: Shank hardness from the end of the flute run out to within 1 inch of the shank end shall be spring tempered to 30 HRc or greater. Hardness testing. When testing is required, hardness testing will be performed in accordance with the current version of ASTM E18 or ASTM E384, as applicable. Applies to item(s) : 22, 23, 24, 25, 26, 27, 28, 29, 30 and 31 T2.3 DRILL MATERIAL: Drills shall be made of High Speed Steel conforming to ASTM A 600-92A. Drills shall be made of either M-1, M-2, M-7, or M-10 High Speed Steel except when M-42 Cobalt High Speed Steel is specified. Applies to item(s) : 23 T2.4 Tools in the set shall be manufactured by only one manufacturer unless otherwise specified. Applies to item(s) : main kit/set ITEM MARKING T3.1 Each item Shall Be Marked in a Permanent and Legible Manner with: 1) Manufacturer's Part Number 2) Manufacturer's Name or Identifying Symbol, and 3) Country of Origin Each Package including the unit, single, intermediate, and exterior container must be labeled with the requisition number or Transportation Control Number (TCN). Requisition Number and TCN are found on the Purchase Order. Applies to item(s) : main kit/set T3.2 Each drill size shall be marked in a plain and permanent manner with the manufacturer's name, or with a trademark of such known character that the type of manufacture may be readily determined by the name, abbreviation, or commercial industry classification. Marking requirements for Standard size - 1/8 inch, Metric size - 3.18mm and Wire Gage size - 31 diameter and smaller are not required. Applies to item(s) : 22, 23, 24, 25, 26, 27, 28, 29, 30 and 31 PACKAGING T4.1 One (1) set shall be preserved and packaged in a unit package designed to protect the item against damage during shipment, handling and storage. Applies to item(s) : main kit/set MARKING T6.1 All unit, intermediate, transport packages and unit loads shall be marked and bar coded for delivery to the GSA DEPOT and MILITARY ACTIVITIES shall be in accordance with the latest version of MIL-STD-129, "Military Marking For Shipment and Storage". "Latest version" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the Defense Logistics Agency's "Assist" Quicksearch web site: http://assist.daps.dla.mil/quicksearch/ NOTICE: All Pallets transported / Shipped to the GSA Depot MUST be HEAT TREATED and marked IAW IIPC Palletization: The shipping (transport) containers shall be palletized. The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, and double-face non-reversible pallets. The palletized load shall not exceed 2500 pounds in weight for shipments to the Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (French Camp Location). The palletized load shall not overhang the pallet deck board edge by more than 1 inch and shall not exceed 53 inches in overall height (including pallet). Less than half pallet loads or loads shipped by small package carrier in acceptable transport packing need not be palletized. When less than full but more than a half pallet is used, the palletized load shall utilize proper bracing and/or reinforcement to ensure that the load can withstand two additional loads placed on it. Stacking: A load-stacking test shall be performed once, at the beginning of the contract, for each different unitized or palletized load configuration. A fully palletized load shall be tested utilizing a total stack of three palletized loads, with all the proper bracing and/or reinforcement necessary to perform the test. There shall be no evidence of damage to the pallets, shipping containers or products when stack is tested on the rigid surface for a minimum of 24 hours, in compliance with all the National and Local Safety Regulations. The pre-tested palletized load configuration shall be duplicated using the same packaging materials, pattern, number of shipping (transport) containers, and procedures consistent throughout the duration of the contract. Palletized loads shall be stable and safe when handled with mechanical equipment by qualified personnel. Materials: All lumber used inside or outside a shipment shall be bark free. No used wood pallets with repaired components or stringers will be acceptable. All wood pallet stringers shall be manufactured from hardwoods. Pallets manufactured of materials other than wood, shall conform to all the requirements specified herein. Unitization: For the purpose of this requirement, the assembled group of containers or items in a single load that can be handled as a unit throughout the distribution system. Unitization encompasses, but is not limited to, consolidation in a container, placement on a pallet or load base having forklift capability, or securely binding together. Shipments should be considered for unitization where appropriate or specified. Unitization of pallet load: The palletized load shall be unitized and secured to the pallet to insure that the load arrives intact without product damage. The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Vertical, horizontal or filler reinforcement shall be added as necessary to meet the stacking strength requirements. A palletized load shall be secured to the pallet by shrink or stretch wrapping, and/or, by steel or nonmetallic strapping. When steel or nonmetallic strapping is used, edge protectors shall be provided to prevent damage to the cartons when tensioning the strapping. As a minimum, two straps shall run lengthwise, two straps shall run widthwise, and two straps shall run around the girth of the palletized load. A palletized load shall be capable of protecting the products against damage in a multiple handling, transportation, and storage environment having distribution warehouses with rack systems that support the load/s overhead of warehouse personnel. Notice of special requirements for shipment to all countries, GSA Depots and DLA Consolidated Shipping Points that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published Guidelines for Regulating Wood Packaging Material in International Trade. Countries endorsing the IPPC Guidelines are found at the website given below. General Services Administration Acquisition Manual (GSAM) Clause 552.211-89 requires non-manufactured wood pallets and other non-manufactured wood packaging material used to pack items for delivery to or through IPPC countries be marked and properly treated in accordance with IPPC guidelines. Pallets and packing material shipped to FAS distribution facilities designated for possible delivery to the countries endorsing the IPPC Guidelines will comply with DLAD 47.305-1, and MIL-STD-2073-1. http://www.aphis.usda.gov/import_export/plants/plant_exports/wpm/country/index.shtml UNIT PACKAGES: The unit packages shall be packed in a close fitting fiberboard box in compliance with the Uniform Freight Classification and the National Motor Freight Classification requirements of Rules, Item 222, Sec. 3., Minimum 200 psi, or Edge Crush Test (ECT) 32 Lbs. per Inch Width. Applies to item(s) : main kit/set ENVIRONMENTAL FIELDS TE.6. PRIME Packaging and packing requirements in this item purchase description are unique at the request of the U.S. Navy Supply Systems Command. This item is included in the Navy s PLASTICS REMOVAL IN MARINE ENVIRONMENT (PRIME) PROGRAM under the U.S. Marine Plastic Pollution Research and Control Act of 1987 (MPPRCA) and the International Convention for the Prevention of Pollution from Ships Treaty (MARPOL) Annex V. Items in the PRIME program prohibit the use of plastic packaging, void fill other than Kraft paper, and tape when plastics are defined in ASTM D883-00, Standard Terminology Related to Plastics. The package shall be the same as that normally provided by the supplier and the pack shall comply with the rules and regulations applicable to the mode of transportation except that the use of plastic packing materials, void fill other than Kraft paper, and pressure sensitive tapes are prohibited. Applies to item(s): 22 and 34
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/notices/dbdfbaf1120178230a07d9eccf6c3c5c)
 

Record

SN03571474-W 20141114/141112234552-dbdfbaf1120178230a07d9eccf6c3c5c (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |