SOURCES SOUGHT
56 -- Fabrication, Delivery and Assembly of Intake Gates and Draft Tube Bulkheads, John Day Dam, Rufus, OR
- Notice Date
- 10/6/2014
- Notice Type
- Sources Sought
- NAICS
- 332312
— Fabricated Structural Metal Manufacturing
- Contracting Office
- USACE District, Portland, Contracting Division (CECT-NWP), P.O. Box 2946, Portland, OR 97208-2946
- ZIP Code
- 97208-2946
- Solicitation Number
- W9127N-15-R-0009
- Response Due
- 10/27/2014
- Archive Date
- 12/5/2014
- Point of Contact
- Michael Pearson, 503-808-4619
- E-Mail Address
-
USACE District, Portland
(michael.d.pearson@usace.army.mil)
- Small Business Set-Aside
- N/A
- Description
- This is a sources sought announcement for information only, to be used for preliminary planning purposes. No proposals are being requested or accepted with this sources sought. This is not a solicitation or a Request for Proposal (RFP) and no contract shall be awarded from this sources sought. Respondents will not be notified of the results of the evaluation. The U.S. Army Corps of Engineers - Portland District (USACE-NWP) has been tasked to solicit and award this procurement under a competitive, fixed-price contract. The type of solicitation to be issued will depend upon the responses to this sources sought. No reimbursement will be made for any costs associated with providing information in response to this sources sought or any follow up information requests. Description of Services: The Contractor will be required to fabricate, deliver and assemble three intake gates (four individual sections makes one gate) and two draft tube bulkheads (three individual sections makes one bulkhead) per USACE detailed design to FOB destination John Day Dam, located in Rufus, Oregon. The intake gates and draft tube bulkheads are fabricated steel structures that are used to isolate main hydroelectric generating units so they can be dewatered for maintenance or repair. The intake gates are placed on the upstream side of a unit and the draft tube bulkheads are placed on the downstream side. The largest intake gate section is approximately 22'-6 quote mark wide by 12'-6 quote mark tall. The largest draft tube bulkhead section is approximately 36'-10 quote mark wide by 11'-5 quote mark tall. The intake gates and draft tube bulkheads are classified as hydraulic steel structures and are required to be welded per AWS D1.5. Contractor will need to have current AWS D1.5 qualification to be awarded this contract. Contractor will also need to have a crane with the ability to suspend the completed intake gate and bulkhead structures for tolerance measurements. The Contractor is responsible to produce shop drawings, fabricate, deliver (FOB Destination), and assemble the intake gate and draft tube bulkheads. The method of delivery is at the discretion or the Contractor but intake gates will need to be assembled and stood upright so the Government's intake crane can pick the units and perform the installation. Installation will be completed by the Government. The official Synopsis citing the solicitation number will be issued on the Federal Business Opportunities website, www.fbo.gov, inviting firms to register electronically to receive a copy of the solicitation when it is issued. Responses to this sources sought shall include the following information: 1. Firm's name, address, point of contact, phone number, and email address. 2. Firm's interest in bidding on the solicitation when it is issued. 3. Firm's capability to perform a contract of this magnitude and complexity (including whether the firm has the ability to perform work per AWS D1.5), include comparable work performed: Three (3) examples with a brief description of the project, customer name, timeliness of performance, customer satisfaction, and dollar value of the project. 4. Firm's business category and size. 5. Firm's responding to this source sought announcement, which fail to provide the above requested information, will not be used to assist the Government in the acquisition decision, the intent of this sources sought announcement. Interested firms shall respond to this sources sought no later than 15:00 hours Pacific Standard Time (PST), 27 October 2014. All interested firms must be registered in the System for Award Management (SAM) in order to be eligible to receive an award and may call 1-866-606-8220 or visit the website www.sam.gov for more information. The USACE-NWP Contracting Office will be the sole point of contact for this action. E-mail responses to the Primary Point of Contact, Mr. Michael Pearson at michael.d.pearson@usace.army.mil. E-mail is the preferred method for receiving responses to this sources sought. The North American Industry Classification System (NAICS) code for this requirement is 332312 - Fabricated Structural Metal Manufacturing. The size standard is 500 employees. The Product Service Code (PSC) is 5660 - Fencing, Fences and Gates and Components. Point of Contact for small business questions or assistance is the Portland District Deputy for Small Business, Carol McIntyre at (503) 808-4602.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA57/W9127N-15-R-0009/listing.html)
- Place of Performance
- Address: USACE District, Portland Contracting Division (CECT-NWP), P.O. Box 2946 Portland OR
- Zip Code: 97208-2946
- Zip Code: 97208-2946
- Record
- SN03543369-W 20141008/141006234211-bcaa5e20ab27b0b73fece6d109b6e7af (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |