SOLICITATION NOTICE
71 -- Operator Consoles - RFQ Operator Console
- Notice Date
- 10/3/2014
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334511
— Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, AFLCMC / AFSC / AFNWC - HILL AFB, ., Hill AFB, Utah, 84056, United States
- ZIP Code
- 84056
- Solicitation Number
- FA8224-15-T-0003
- Archive Date
- 10/11/2014
- Point of Contact
- Suzette E. G. San Juan, Phone: 8017755306
- E-Mail Address
-
suzette.sanjuan@us.af.mil
(suzette.sanjuan@us.af.mil)
- Small Business Set-Aside
- N/A
- Description
- Single Source Justification RFQ - Operator Console 309 th SMXG/PZIMC intends to issue a sole source contract to a purchase The Winsted Corporation for operator consoles. The ITIPS room in VAFB requires adequate working surfaces for telemetry analysis to successfully perform all of the required duties during launch operations. ITIPS requires individual work surfaces for a total of eight telemetry work stations, one viewing terminal work station and one unclassified control terminal work station. The layout for the front row control consoles will have an overall semicircular layout made up of straight section control consoles. The front row will consist of a single straight control console in the center with two T shaped control consoles on each end and connected with a 15 degree angle surface. The second row will consist of two separate T shaped control consoles spaced apart and both angled 15 degrees opposite from vertical. The third row will consist of a single straight work surface control console. The T shaped control consoles are approximately 15ft x 3ft with a peninsular extruding from the midway perpendicular to the previously given dimension approximately 2.5ft wide x 3.5ft long. The straight control consoles are approximately 7.5ft long and 3ft wide. Under the peninsulas the control consoles will have shelving. Each station will house a single Dell T7610 workstation, except for the control terminal workstation which will have two, mounted under the control console top with a swing out door for easy control. Each Dell designated for the purpose of telemetry analysis and viewing will drive a quantity of six monitors each and will require them to be in a three column two row configuration in front of the analyst. The Dells designated as control terminal will drive a total of four monitors in a two column by two row configuration. On the surface under every array of monitors, a single 2U turret will be required to house telecommunication equipment with a depth of 16inches. In-between the monitor arrays collinear to the peninsulas there will be enough surface area to allow installation of a networked HP M750 LaserJet printer. Each T shaped control console will include electrical junction boxes and enough electrical plugins to handle at least 12 monitors 2 computers 1 printer. Each straight control console will include electrical junction boxes and enough electrical plugins to handle at least 6 monitors 2 computers and 6 miscellaneous connections. Notice to Intent to award a Sole Source Procurement in accordance with FAR 6.302-1, Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. The Government intends to issue a sole source contract to the contractor The Winsted Corporation. The solicitation will be posted at http://www.fedbizopps.gov/ under solicitation number F2DCCE4268A001 on 3 October 2014. This requirement is considered sole source due to the fact the The Winsted Corporation that the weapon system consoles have to be the exact part number and design as the prototype system. The NAICS code for this requirement is 334511 (Acceleration indicators and systems components, aerospace type, manufacturing) with a small business size standard of 750 employees. This notice is not a request for competitive proposals and all other interested contractors shall submit a capabilities document which states their abilities on fulfilling this requirement. Responese should be submitted by 12:00 p.m. MST on October 10, 2014. Description of the service to be purchase with clause is listed below. **FRONT CONSOLE** Item 0001 1 EA - INSTALLATION (TOM ARMSTRONG) Item 0002 1 EA - FREIGHT/HANDLING/INSURANCE CHG Item 0003 10 EA - LED DESK LAMP W/MOUNTING BRKT Item 0004 1 EA - UNDER WORK SURFACE RACK CAB Item 0005 2 EA - 1 SHEL STORAGE CABINET Item 0006 5 EA - CPU SHELF Item 0007 2 ST - SINGLE BAY STRINGER, 24" Item 0008 5 ST - TRIPLE BAY STRINGER, 72" Item 0009 5 EA - CUSTOM 2U TURRET Item 0010 10 EA - SINGLE BAY HINGED COVER Item 0011 4 EA - 27" ABS FILLER Item 0012 1 PR - SIGHT-LINE END FRAMES Item 0013 4 EA - SIGHT-LINE INTERMEDIATE FRAME Item 0014 17 EA - BOTTOM SHELF Item 0015 2 EA - SINGLE BAY RISER Item 0016 10 PR - WORK SURFACE SUPPORT BRACKET Item 0017 5 EA - SINGLE ELECT BOX MNTG KIT Item 0018 1 EA - DUAL ELECTRICAL BOX MNTG KIT Item 0019 33 EA - VENTED DOOR Item 0020 3 EA - 25"W PENINSULA CREDENZA Item 0021 1 PR - BLACK SIDE PANELS W/PERF PANEL Item 0022 2 EA - 15 DEGREE CORNER, ASSEMBLED Item 0023 5 EA - 3-BAY 22-3/4"D MARMOLEUM WS Item 0024 2 EA - 15 DEG 22-3/4"D MARMOLEUM WS Item 0025 2 EA - PENINSULA WORK SURFACE Item 0026 1 EA - 5-1/4"H BLACK BLANK PANEL Item 0027 10 EA - 6 OUTLET POWER STRIP 15' CORD Item 0028 8 EA - ELECT ASSEMBLY MOUNTING BRKT Item 0029 15 EA - 28.5"H MOUNTING POST Item 0030 30 EA - SINGLE ARTICULATING POLE MOUNT Item 0032 2 EA - 50 BLACK PILOT SCREWS & CLIPS Item 0033 5 EA - ADJUSTABLE KEYBOARD SHELF **LEFT REAR CONSOLE** Item 0034 4 EA - LED DESK LAMP W/MOUNTING BRKT Item 0035 1 EA - 1 SHELF STORAGE CABINET Item 0036 2 EA - CPU SHELF Item 0037 1 ST - SINGLE BAY STRINGER, 24" Item 0038 2 ST - TRIPLE BAY STRINGER, 72" Item 0039 2 EA - CUSTOM 2RU TURRET Item 0040 4 EA - SINGLE BAY HINGED COVER Item 0041 2 EA - 27" ABS FILLER Item 0042 1 PR - SIGHT-LINE END FRAMES Item 0043 2 EA - SIGHT-LINE INTERMEDIATE FRAME Item 0044 7 EA - BOTTOM SHELF Item 0045 1 EA - SINGLE BAY RISER Item 0046 4 PR - WORK SURFACE SUPPORT BRACKET Item 0047 2 EA - SINGLE ELECT BOX MNTG KIT Item 0048 1 EA - DUAL ELECTRICAL BOX MNTG KIT Item 0049 14 EA - VENTED DOOR Item 0050 1 EA - 25"W PENINSULA CREDENZA Item 0051 1 PR - BLACK SIDE PANELS W/PERF PANEL Item 0052 2 EA - 3-BAY 22-3/4"D MARMOLEUM WS Item 0053 1 EA - PENINSULA WORK SURFACE Item 0054 4 EA - OUTLET POWER STRIP 15' CORD Item 0055 4 EA - ELECT ASSEMBLY MOUNTING BRKT Item 0056 6 EA - 28.5"H MOUNTING POST Item 0057 12 EA - SINGLE ARTICULATING POLE MOUNT Item 0058 1 EA - 50 BLACK PILOT SCREWS & CLIPS Item 0059 2 EA - ADJUSTABLE KEYBOARD SHELF **RIGHT REAR CONSOLE** Item 0060 4 EA - LED DESK LAMP W/MOUNTING BRKT Item 0061 2 EA - 1 SHELF STORAGE CABINET Item 0062 2 EA - CPU SHELF Item 0063 1 ST - SINGLE BAY STRINGER, 24" Item 0064 2 ST - TRIPLE BAY STRINGER, 72" Item 0065 2 EA - CUSTOM 2RU TURRET Item 0066 4 EA - SINGLE BAY HINGED COVER Item 0067 2 EA - 27" ABS FILLER Item 0068 1 PR - SIGHT-LINE END FRAMES Item 0069 2 EA - SIGHT-LINE INTERMEDIATE FRAME Item 0070 7 EA - BOTTOM SHELF Item 0071 1 EA - SINGLE BAY RISER Item 0072 4 PR - WORK SURFACE SUPPORT BRACKET Item 0073 2 EA - SINGLE ELECT BOX MNTG KIT Item 0074 1 EA - DUAL ELECTRICAL BOX MNTG KIT Item 0075 14 EA - VENTED DOOR Item 0076 1 EA - 25"W PENINSULA CREDENZA Item 0077 1 PR - BLACK SIDE PANELS W/PERF PANEL Item 0078 2 EA - 3-BAY 22-3/4"D MARMOLEUM WS Item 0079 1 EA - PENINSULA WORK SURFACE Item 0080 4 EA - 6 OUTLET POWER STRIP 15' CORD Item 0081 4 EA - ELECT ASSEMBLY MOUNTING BRKT Item 0082 6 EA - 28.5"H MOUNTING POST Item 0083 12 EA - SINGLE ARTICULATING POLE MOUNT Item 0084 1 EA - 50 BLACK PILOT SCREWS & CLIPS Item 0085 2 EA - ADJUSTABLE KEYBOARD SHELF **SINGLE OPERATOR CONSOLE** Item 0086 2 EA - LED DESK LAMP W/MOUNTING BRKT Item 0087 1 EA - CUSTOM 2U TURRET Item 0088 2 EA - 28.5"H MOUNTING POST Item 0089 4 EA - SINGLE ARTICULATING POLE MOUNT Item 0090 1 EA - CPU SHELF Item 0091 1 ST - TRIPLE BAY STRINGER, 72" Item 0092 2 EA - SINGLE BAY HINGED COVER Item 0093 1 PR - SIGHT-LINE END FRAMES Item 0094 3 EA - BOTTOM SHELF Item 0095 2 PR - WORK SURFACE SUPPORT BRACKET Item 0096 6 EA - VENTED DOOR Item 0097 1 PR - BLACK SIDE PANELS W/PERF PANEL Item 0098 1 EA - 3-BAY 22-3/4"D MARMOLEUM WS Item 0099 1 EA - SINGLE ELECT BOX MNTG KIT Item 0100 1 EA - ELECT ASSEMBLY MOUNTING BRKT Item 0101 2 EA - 6 OUTLET POWER STRIP 15' CORD Item 0102 2 EA - ADJUSTABLE KEYBOARD SHELF
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OOALC/FA8224-15-T-0003/listing.html)
- Place of Performance
- Address: 576 FLTS/TEMA, 1785 Utah Ave, Bldg 6601, Vandenberg AFB, CA 93437, Vandenberg AFB, California, 93437, United States
- Zip Code: 93437
- Zip Code: 93437
- Record
- SN03542573-W 20141005/141003235438-4a1869b22dfba75f963ea4b91f3d3979 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |