SOLICITATION NOTICE
66 -- REMOVE WINDOWS TO TI DMD AND REPLACE WITH TEMP WINDOWS
- Notice Date
- 9/23/2014
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 541712
— Research and Development in the Physical, Engineering, and Life Sciences (except Biotechnology)
- Contracting Office
- NASA/Goddard Space Flight Center, Code 210.S, Greenbelt, MD 20771
- ZIP Code
- 20771
- Solicitation Number
- NNG14527150Q
- Response Due
- 10/3/2014
- Archive Date
- 9/23/2015
- Point of Contact
- Shawn G Watts, Purchasing Agent, Phone 301-286-5526, Fax 301-286-1773, Email shawn.g.watts@nasa.gov
- E-Mail Address
-
Shawn G Watts
(shawn.g.watts@nasa.gov)
- Small Business Set-Aside
- N/A
- Description
- NASA/GSFC has a requirement for This PR is for the removal of the existing window of 4 government-supplied 0.7 XGA DMDs, replacement with a temporary window that can be removed for brief periods for testing and calibration, and installation in the government-supplied Discovery 4100. This work is to be performed on a best-effort basis. Shipment is needed within 4 weeks after receipt of customers Discovery 4100 board set, DMDs, and temporary windows. The government will also supply the DMD containers. The government-supplied replacement windows will meet the following specifications: a) L: 1.4 (+0/-0.010) b) W: 1.1 (+0/-0.010) c) THK: 0.118 (+0.005/-0.010) Typical (but can be as thin as 1 mm) d) Bevel: 0.020 (+/-0.005) face width at 45 degrees (+/-15 degrees) e) Scratch/Dig: 20/10 or better if possible, depending on material f) Surface Figure: </= 1 fringes P-V at 0.633um g) Wedge: 8 arc minutes (+/- 2 arc minutes) suggested if used with laser sources h) Wedge if chosen, to be along long axis within 5 degrees. i) AR/AR coating of choice, up to a 2 mm uncoated band allowed around perimeter. This work is to be performed on a best-effort basis. Shipment of the modified DMDs is needed within 4 weeks after receipt of the customer-supplied Discovery 4100 board set, 4 DMDs, 4 replacement windows, and 4 DMD protective containers. This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation, which is issued as a Request for Quotation (RFQ); quotes are being requested and a written solicitation will not be issued. Offerors are required to use the On-Line RFQ system to submit their quote. The On-line RFQ system is linked above or it may be accessed at http://prod.nais.nasa.g ov/cgi-bin/eps/bizops.cgi?gr=C&pin=. The information required by FAR Subpart 12.6 is included in the on-line RFQ. The Government intends to acquire a commercial item using FAR Part 12 and the Simplified Acquisition Procedures set forth in FAR Part 13. Questions regarding this acquisition must be submitted in writing via e-mail no later than September 30, 2014. Oral communication will not be accepted. It is the quoter's responsibility to monitor this site for the release of amendments (if any). Potential quoters will be responsible for downloading their own copy of this notice, the on-line RFQ and amendments (if any). NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/p ub_library/Omb.html.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/NASA/GSFC/OPDC20220/NNG14527150Q/listing.html)
- Record
- SN03524327-W 20140925/140923235652-9ee26dd4a64d1e947c7c9657239f8ec7 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |