FBODaily.com | FedBizOpps: PRESOL | 42 | OPTION - Fire and Emergency Service Uniforms and Safety Shoes

FBO DAILY - FEDBIZOPPS ISSUE OF SEPTEMBER 18, 2014 FBO #4681
SOLICITATION NOTICE

42 -- OPTION - Fire and Emergency Service Uniforms and Safety Shoes

Notice Date: 9/16/2014
Notice Type: Combined Synopsis/Solicitation
Contracting Office: 9410 Jackson Loop, Fort Belvoir, VA 22060
ZIP Code: 22060
Solicitation Number: W91QV1-14-T-7713
Response Due: 9/18/2014
Archive Date: 3/17/2015
Point of Contact: Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
E-Mail Address: Clientservices@fedbid.com;
Small Business Set-Aside: Total Small Business
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W91QV1-14-T-7713 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-76. The associated North American Industrial Classification System (NAICS) code for this procurement is 315220 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-09-18 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Fort Belvoir, VA 22060 The MICC Fort Belvoir requires the following items, Meet or Exceed, to the following: Base Period of Performance: 09/29/2014 - 09/28/2015 LI 001: Station Pant - 7.5 oz Nomex IIIA Full-Cut Station Wear Pant Manufacture: Workrite, Series 400 or 402 Color: Navy Blue Materials: Made from 7.5 oz Nomex. IIIA Cut/Fit: Full Cut Stitch: Triple-stitched, feld-locked outer seams and seat seam for unparalleled durability. All other seams, including zipper area, are double-stitched Fly Zipper: Solid brass zipper Front Pockets: Two front deep-inset pockets Rear Pockets: Two large rear welt pockets, one with button Waist Band: Fully finished waistband with belt loops Creases: Permanent creases Appearance: Pressed and autoclaved Certification : NFPA 1975 station uniform standard Waist and Inseam Sizes: Various sizes Waist 28-54, inseam to 34" to 46, 175, Job; LI 002: Station Shirt SS - 4.5 oz Nomex IIIA Firefighter Shirt Manufacture: Workrite 730NX45 Color: Navy Blue Materials: Made with 4.5 oz Nomex?? IIIA Sleeve Length: Short Sleeve Shirt Tail: Extra-long shirt tail Shirt Pockets: Two box-pleated breast pockets with scalloped flaps. Pocket flaps have hook-and-loop closures with decorative buttons. Left pocket features a pencil slot and above it, a badge tab Shirt Epaulets: Shoulder epaulets secured with Melamine buttons Military Creases: Five sewn-in military creases Collar: Collar band Closure: Double-stitched front placket with heavy-duty snap closure and decorative Melamine buttons Appearance: Pressed and autoclaved Certification: NFPA 1975 station uniform standard, 175, Job; LI 003: Coveralls - 4.5 oz. Nomex IIIA Coveralls Manufacture: Workrite, Series 110 (110NMX-45) Color: Navy Blue with Silver Scotchlite Reflective Trim Package Materials: Made from 7.5 oz Nomex?? IIIA Style: Deep #Action back# for greater ease of movement, large front and rear pockets, a pocket pass-thru and finished wrist cuffs that are snap adjustable., 55, Job; LI 004: Job Shirt - Zip Front Job Shirt Manufacture: Game Color: Navy Blue Style# 8070 Materials: 12 oz. 95/5 Cotton/Polyester super weight fleece, Cotton anti-curling canvas collar and elbow patches Stain Resistant finish, No roll collar, Chest pocket with Velcro divider, Hand pockets on both sides, Mic pocket at both shoulders and Pen pockets on left sleeve. Size: X-Small thru 5XL, Regular and Tall cut, 110, Job; LI 005: Garrison Leather Belt - Garrison Leather Belt Manufacture: Duty-man Color: Black with Gold or Silver Buckle Size: Various sizes 26-56 inches, 55, Job; LI 006: Station Shirt LS - 4.5 oz Nomex IIIA Firefighter Shirt Manufacture: Workrite 735NX45 Color: Navy Blue Materials: Made with 4.5 oz Nomex?? IIIA Sleeve Length: Long Sleeve Shirt Tail: Extra-long shirt tail Shirt Pockets: Two box-pleated breast pockets with scalloped flaps. Pocket flaps have hook-and-loop closures with decorative buttons. Left pocket features a pencil slot and above it, a badge tab Shirt Epaulets: Shoulder epaulets secured with Melamine buttons Military Creases: Five sewn-in military creases Collar: Collar band Closure: Double-stitched front placket with heavy-duty snap closure and decorative Melamine buttons Appearance: Pressed and autoclaved Certification: NFPA 1975 station uniform standard Shirt Sizes: Medium through XXXX-Large. Shirts will include a name panel of same material as the shirt and it will be sewn on the right side of the shirt above pocket flap. The name panel will have the individual#s first initial followed by a period and last name embroidered on the name panel. The name embroidery will be silver in color or gold. The shirt will have the embroidered badge panel on the left breast over the left breast pocket. Based on the rank will determine the badge panel. Customer will provide Department Patches and vendor will sew the patch on the left shoulder of each shirt (one patch per shirt). Collars: The collars of the officer#s shirt will have rank embroidered: the rank will be indicated by standard fire department bulges and the customer will provide the number and type of bugles at the time of sizing of the employee., 175, Job; LI 007: Dress Shirt LS - Paragon Plus Poplin Class B Shirt (Long Sleeve) Manufacture: Elbeco Style: P877 Color: White Material: 65% Polyester/35% Cotton with poplin weave. Weight: 4.25 oz/sq yd-7.25 oz/linear yd. Size: Various 14-22 Neck, 29-40 Sleeve Length, 50, Job; LI 008: Dress Shirt SS - Paragon Plus Poplin Class B Shirt (Short Sleeve) Manufacture: Elbeco Style: P867 Color: White Material: 65% Polyester/35% Cotton with poplin weave. Weight: 4.25 oz/sq yd-7.25 oz/linear yd. Size: Various 14-22 Neck, 29-40 Sleeve Length, 50, Job; LI 009: Dress Coat - Double Breasted Dress Coat: (Elbeco Style #DC13820) The Double Breasted coat will be fully lined and constructed of 100% polyester, 7 oz./sq. yd./ 11.5 oz./linear yd. Serge Weave Navy Blue Materials. It will have a permanent badge tab on left breast, inside Breast pocket, shoulder pads and front interlining panels for enhanced drape. Additionally it will have 8-button front, peak lapels. Buttons: Chief Officers coat buttons are to be gold with raised FD on them and Captains, Lieutenants and Firefighters buttons are to be silver with raised FD on them. Badge Tab: Will be placed on the left side center ?? to 1 inch above the line of the breast pocket (Note: This coat will not have external pockets). Sleeve Braid: Bottom Row will be positioned 3# above bottom of sleeve. Additional rows will be spaced ??# apart. Braid will be on top side of sleeve. Braid Color: Chief Officers # gold braid and will be based on the rank i.e. Fire Chief will have 5 braids, Deputy Chief will have 4 braids, Assistant Chief will have 3 braids, Battalion and Fire Marshals will have 2 braids. Captains will have 2 silver braids; Lieutenants will have 1 silver braid on the sleeves. Maltese Crosses: Will be used to denote the years of service. If used with sleeve braids, they will be located ??# above top row of braids. If no braid is used they will be located 3# above bottom of to bottom of Maltese crosses. Color of Crosses: Chief Officers # Gold. Captains, Lieutenants and Fire fighters # Silver. 1 Maltese Cross will represent 5 years of service. Fire Department Patch: Customer will provide Departmental Patch and vendor will sew it on the left shoulder of coat. 1 per coat Coat sizing: Various sizes 26-54., 15, Job; LI 010: Dress Pant - Dress Uniform Pants: (Elbeco Style # E8941 and # E8945) The dress uniform pants will be 100% polyester, 7 oz. /sq. yd. | 11.5 oz. /linear yd. Navy Blue Serge Weave Materials. Pockets will be Extra-deep quarter-top front pockets, two back pockets with button tab on left. Belt loops will be 7/8" lined belt loops. Pant Sizing: Various sizes 26-54., 15, Job; LI 011: Dress Shirt LS - Dress Uniform Shirt: (Elbeco Style# 310 White and 313 Light Blue) The dress uniform shirt will be long sleeve and constructed of 100% stretched textured polyester, 5#5.5 oz. /sq. yd. | 9.5#10 oz. /linear yd. Tropical with Nano-Tex#, (coolest comfort for permanent moisture management and protection). Features to include: Shoulder straps crossed stitched symmetrically for neater appearance, pleated pockets, scalloped pocket flaps with Velcro closures, matching buttons, full badge sling, stitched-in military creases and conventional collar and band with permanent collar stays. Shirt Color: White for Chief Officers and Captains, Medium Blue for Lieutenants and Firefighters. Fire Department Patch: Customer will provide Departmental Patch and vendor will sew it on the left shoulder of shirt 1 per shirt Shirt Sizing: Various sizes 26-54, 15, Job; LI 012: Bell Crown Type Hat - Bell Crown Type Hat (Stovepipe style): Bayly Style #9807 Navy Blue or White. White will be worn by Chief Officers and Captains. Navy Blue will be worn by Fire Marshals, Lieutenants and Firefighters. Each hat will have black, silver or gold strap. Strap color will be determined by rank. Hat Sizing: Various sizes, 6-12, 15, Job; LI 013: Dress Belt - Dress Uniform Belts: Basket Weave Style # Black leather 1 3/4# wide. Buckles will be Gold and Silver Size: Various sizes 26-56 inches, 15, Job; LI 014: Dress Uniform Tie - Dress Uniform Tie: 100% Polyester, Dark Navy, standard type with Black Neck Clasp. Tie Sizing: Regular and Long Length., 15, Job; LI 015: Dress Uniform Shoes - Dress Uniform Shoes: High Gloss Professional Oxfords (Bates Lites, Rocky, Fire Earth H2O or Thorgood shoes) The soles must be slip resistant. Color: High Gloss Black Sizes 6-16 mens med-xxx wide, 15, Job; LI 016: Braid Color - Braid Color: Gold, 300, Job; LI 017: Braid Color - Braid Color: Silver, 300, Job; LI 018: Braid Color - Maltese Crosses: Gold, 100, Job; LI 019: Maltese Cross (Fabric) Maltese Crosses: Gold, 100, Job; LI 020: Maltese Cross (Fabric) Maltese Crosses: Silver, 100, Job; LI 021: Coat and Shirt Badge Coat and Shirt Badge Manufacture: Smith & Warren Style: S-158 with 5/16# Center Seal Color: Gold Plate or Rhodium with Red background on center seal. Center seal will have scramble or rank of position. Rank Structure furnished by Customer., 25, Job; LI 022: Chest Name Plate Chest Name Plate Style Manufacture: Hook Fast Style: # QS-6 with 3550 Emblem (FORT BELVOIR) Color: Gold or Silver with the following engraving (Black) First Line: First Initial Last Name Second Line: Rank of Individual., 50, Job; LI 023: Hat Badge - Hat Badge Manufacture: Smith & Warren Style: 1 5/8# Plain with Screw Post Color: Silver or Gold, Rank insignia, 15, Job; LI 024: Lapel Insignia - Smith & Warren Style: 1 3/16# Plain with double clutch post. Color: Silver or Gold, Fire department rank insignia, 30, Job; LI 025: Collar Insignia - Collar Insignia Manufacture: Smith & Warren Style: C501M, with double clutch post. Color: Silver or Gold, with 463, 464, 465, or 466., 30, Job; LI 026: Performance Training Short - ST-312 Performance Training Short Manufacture: Sport-Tek Color: True Navy Material: 5.3 oz. 100% Cationic polyester flat back mesh, elastic waistband with continuous loop draw-cord, side pockets and back hip pocket, 9# inseam Size: X-Small thru 4XL, 300, Job; LI 027: Tee Shirt SS - #2000 or 2000L Ultra Cotton Short Sleeve T-Shirt Manufacture: Gildan Color: Navy Blue (32C) and White (30N) Material: 100% Cotton, 6 oz. preshrunk jersey knit. Size: Small thru 5XL or XLT thru 3XLT White Silkscreen: Department Logo on Left Chest and Fort Belvoir Fire & Rescue on back of Navy shirts. Navy Blue Silkscreen: Department Logo on Left Chest on White shirts., 600, Job; LI 028: Tee Shirt LS - 2400 Ultra Cotton Long Sleeve T-Shirt Manufacture: Gildan Color: Navy Blue (32C) and White (30N) Material: 100% Cotton, 6 oz. preshrunk jersey knit with knit cuffs Size: Small thru 5XL or XLT thru 3XLT White Silkscreen: Department Logo on Left Chest and Fort Belvoir Fire & Rescue on back of Navy shirts. Navy Blue Silkscreen: Department Logo on Left Chest on White shirts., 600, Job; LI 029: Sweat Shirt LS - #18000 Heavy Blend Adult Crewneck Sweatshirt Manufacture: Gildan Color: Navy Blue (32C) Material: 50% Cotton/50% Polyester Fleece, 8 oz. preshrunk fleece. Size: Small thru 5XL or XLT thru 3XLT White Silkscreen: Department Logo on Left Chest and Fort Belvoir Fire & Rescue on back of Navy shirts., 300, Job; LI 030: Sweat Pant - #12300 Dry Blend Open Bottom Pocketed Sweatpants Manufacture: Gildan Color: Navy Blue (32C) Material: 50% Cotton/50% Polyester Dry Blend Fleece, 9.3 oz. preshrunk fleece. Size: Small thru 2XL Vendor will provide White Silkscreen: Department Logo on front left leg., 300, Job; LI 031: Lined Jacket - Lined Eisenhower Jacket Manufacture: Dickie Color: Navy Blue (Dark) Material: 65% Polyester/35% Cotton with Nylon Taffeta Quilted to Polyurethane Foam. Style: Size: S-5 XL Regular and S-3XL Long, 125, Job; LI 032: Wool Cap - Flex-Fit Wool Cap Manufacture: Richardson, Style: 585 Color: Navy Material: Pro-Wool blend stretch fabric; Pro-Crown shape with buckram-fused front panels; comfort-stretch sweatband; pre-curved PE v isor with eight rows of stitching. Size: SM-MD and LG-XL., 125, Job; LI 033: Knit Cap - Knit Stocking Cap Manufacture: Port Authority, Style: CP90 Color: Navy Material: 100% Acrylic with 3 inch folding cuff Size: One size Embroider Fort Belvoir Fire and Emergency Services Logo on front of cap. Embroidery thread colors Red & White. Logo design will be provided by customer., 125, Job; LI 034: Knit Cap (Skull) - Knit Skull Cap Manufacture: Port Authority, Style: CP94 Color: Navy Material: 100% Acrylic Size: One size Embroider Fort Belvoir Fire and Emergency Services Logo on front of cap. Embroidery thread colors Red & White. Logo design will be provided by customer., 125, Job; LI 035: Steel Toe Safety Boot - 6# Easy Escape Steel Toe Safety Boots Manufacture: Red-Back Boot Company Color: Black Material: 100% full-grain black leather with TPU (Thermoplastic Polyurethane) soles are oil/acid/slip resistant while the PU (Polyur ethane) shock-absorbing mid-soles. Slip Resistant - MARK II Machine tested slip resistant on oil, acid & water. Footwear must meet OSHA & ASTM F2413-05 standards for Electrical Hazards and Steel Toe meets OSHA & ASTM F2413-05 standards for Impact & Compression. Various sizes: 6-16 med-xxx wide, 25, Job; LI 036: Station Boot with Composit Toe - Station Boot with Composite Toe Manufacture: Red-Back Boot Company Color: Black Material: 100% full-grain black leather with TPU (Thermoplastic Polyurethane) soles are oil/acid/slip resistant while the PU (Polyur ethane) shock-absorbing mid-soles. Slip Resistant - MARK II Machine tested slip resistant on oil, acid & water. Footwear must meet OSHA & ASTM F2413-05 standards for Electrical Hazards and Composite Toe meets OSHA & ASTM F2413-05 standards for Impact & Compression. Various sizes: 6-16 med-xxx wide, 25, Job; Option 1 Period of Performance: 09/29/2015 - 09/28/2016 LI 001: Station Pant - 7.5 oz Nomex IIIA Full-Cut Station Wear Pant Manufacture: Workrite, Series 400 or 402 Color: Navy Blue Materials: Made from 7.5 oz Nomex. IIIA Cut/Fit: Full Cut Stitch: Triple-stitched, feld-locked outer seams and seat seam for unparalleled durability. All other seams, including zipper area, are double-stitched Fly Zipper: Solid brass zipper Front Pockets: Two front deep-inset pockets Rear Pockets: Two large rear welt pockets, one with button Waist Band: Fully finished waistband with belt loops Creases: Permanent creases Appearance: Pressed and autoclaved Certification : NFPA 1975 station uniform standard Waist and Inseam Sizes: Various sizes Waist 28-54, inseam to 34" to 46, 220, Job; LI 002: Station Shirt SS - 4.5 oz Nomex IIIA Firefighter Shirt Manufacture: Workrite 730NX45 Color: Navy Blue Materials: Made with 4.5 oz Nomex?? IIIA Sleeve Length: Short Sleeve Shirt Tail: Extra-long shirt tail Shirt Pockets: Two box-pleated breast pockets with scalloped flaps. Pocket flaps have hook-and-loop closures with decorative buttons. Left pocket features a pencil slot and above it, a badge tab Shirt Epaulets: Shoulder epaulets secured with Melamine buttons Military Creases: Five sewn-in military creases Collar: Collar band Closure: Double-stitched front placket with heavy-duty snap closure and decorative Melamine buttons Appearance: Pressed and autoclaved Certification: NFPA 1975 station uniform standard, 220, Job; LI 003: Coveralls - 4.5 oz. Nomex IIIA Coveralls Manufacture: Workrite, Series 110 (110NMX-45) Color: Navy Blue with Silver Scotchlite Reflective Trim Package Materials: Made from 7.5 oz Nomex?? IIIA Style: Deep #Action back# for greater ease of movement, large front and rear pockets, a pocket pass-thru and finished wrist cuffs that are snap adjustable., 55, Job; LI 004: Job Shirt - Zip Front Job Shirt Manufacture: Game Color: Navy Blue Style# 8070 Materials: 12 oz. 95/5 Cotton/Polyester super weight fleece, Cotton anti-curling canvas collar and elbow patches Stain Resistant finish, No roll collar, Chest pocket with Velcro divider, Hand pockets on both sides, Mic pocket at both shoulders and Pen pockets on left sleeve. Size: X-Small thru 5XL, Regular and Tall cut, 110, Job; LI 005: Garrison Leather Belt - Garrison Leather Belt Manufacture: Duty-man Color: Black with Gold or Silver Buckle Size: Various sizes 26-56 inches, 55, Job; LI 006: Station Shirt LS - 4.5 oz Nomex IIIA Firefighter Shirt STATION Manufacture: Workrite 735NX45 Color: Navy Blue Materials: Made with 4.5 oz Nomex?? IIIA Sleeve Length: Long Sleeve Shirt Tail: Extra-long shirt tail Shirt Pockets: Two box-pleated breast pockets with scalloped flaps. Pocket flaps have hook-and-loop closures with decorative buttons. Left pocket features a pencil slot and above it, a badge tab Shirt Epaulets: Shoulder epaulets secured with Melamine buttons Military Creases: Five sewn-in military creases Collar: Collar band Closure: Double-stitched front placket with heavy-duty snap closure and decorative Melamine buttons Appearance: Pressed and autoclaved Certification: NFPA 1975 station uniform standard Shirt Sizes: Medium through XXXX-Large. Shirts will include a name panel of same material as the shirt and it will be sewn on the right side of the shirt above pocket flap. The name panel will have the individual#s first initial followed by a period and last name embroidered on the name panel. The name embroidery will be silver in color or gold. The shirt will have the embroidered badge panel on the left breast over the left breast pocket. Based on the rank will determine the badge panel. Customer will provide Department Patches and vendor will sew the patch on the left shoulder of each shirt (one patch per shirt). Collars: The collars of the officer#s shirt will have rank embroidered: the rank will be indicated by standard fire department bulges and the customer will provide the number and type of bugles at the time of sizing of the employee., 220, Job; LI 007: Dress Shirt LS - Paragon Plus Poplin Class B Shirt (Long Sleeve) Manufacture: Elbeco Style: P877 Color: White Material: 65% Polyester/35% Cotton with poplin weave. Weight: 4.25 oz/sq yd-7.25 oz/linear yd. Size: Various 14-22 Neck, 29-40 Sleeve Length, 50, Job; LI 008: Dress Shirt SS - Paragon Plus Poplin Class B Shirt (Short Sleeve) Manufacture: Elbeco Style: P867 Color: White Material: 65% Polyester/35% Cotton with poplin weave. Weight: 4.25 oz/sq yd-7.25 oz/linear yd. Size: Various 14-22 Neck, 29-40 Sleeve Length, 50, Job; LI 009: Dress Coat - Double Breasted Dress Coat: (Elbeco Style #DC13820) The Double Breasted coat will be fully lined and constructed of 100% polyester, 7 oz./sq. yd./ 11.5 oz./linear yd. Serge Weave Navy Blue Materials. It will have a permanent badge tab on left breast, inside Breast pocket, shoulder pads and front interlining panels for enhanced drape. Additionally it will have 8-button front, peak lapels. Buttons: Chief Officers coat buttons are to be gold with raised FD on them and Captains, Lieutenants and Firefighters buttons are to be silver with raised FD on them. Badge Tab: Will be placed on the left side center ?? to 1 inch above the line of the breast pocket (Note: This coat will not have external pockets). Sleeve Braid: Bottom Row will be positioned 3# above bottom of sleeve. Additional rows will be spaced ??# apart. Braid will be on top side of sleeve. Braid Color: Chief Officers # gold braid and will be based on the rank i.e. Fire Chief will have 5 braids, Deputy Chief will have 4 braids, Assistant Chief will have 3 braids, Battalion and Fire Marshals will have 2 braids. Captains will have 2 silver braids; Lieutenants will have 1 silver braid on the sleeves. Maltese Crosses: Will be used to denote the years of service. If used with sleeve braids, they will be located ??# above top row of braids. If no braid is used they will be located 3# above bottom of to bottom of Maltese crosses. Color of Crosses: Chief Officers # Gold. Captains, Lieutenants and Fire fighters # Silver. 1 Maltese Cross will represent 5 years of service. Fire Department Patch: Customer will provide Departmental Patch and vendor will sew it on the left shoulder of coat. 1 per coat Coat sizing: Various sizes 26-54., 20, Job; LI 010: Dress Pant - Dress Uniform Pants: (Elbeco Style # E8941 and # E8945) The dress uniform pants will be 100% polyester, 7 oz. /sq. yd. | 11.5 oz. /linear yd. Navy Blue Serge Weave Materials. Pockets will be Extra-deep quarter-top front pockets, two back pockets with button tab on left. Belt loops will be 7/8" lined belt loops. Pant Sizing: Various sizes 26-54., 20, Job; LI 011: Dress Shirt LS - Dress Uniform Shirt: (Elbeco Style# 310 White and 313 Light Blue) The dress uniform shirt will be long sleeve and constructed of 100% stretched textured polyester, 5#5.5 oz. /sq. yd. | 9.5#10 oz. /linear yd. Tropical with Nano-Tex#, (coolest comfort for permanent moisture management and protection). Features to include: Shoulder straps crossed stitched symmetrically for neater appearance, pleated pockets, scalloped pocket flaps with Velcro closures, matching buttons, full badge sling, stitched-in military creases and conventional collar and band with permanent collar stays. Shirt Color: White for Chief Officers and Captains, Medium Blue for Lieutenants and Firefighters. Fire Department Patch: Customer will provide Departmental Patch and vendor will sew it on the left shoulder of shirt 1 per shirt Shirt Sizing: Various sizes 26-54, 20, Job; LI 012: Bell Crown Type Hat - Bell Crown Type Hat (Stovepipe style): Bayly Style #9807 Navy Blue or White. White will be worn by Chief Officers and Captains. Navy Blue will be worn by Fire Marshals, Lieutenants and Firefighters. Each hat will have black, silver or gold strap. Strap color will be determined by rank. Hat Sizing: Various sizes, 6-12, 20, Job; LI 013: Dress Belt - Dress Uniform Belts: Basket Weave Style # Black leather 1 3/4# wide. Buckles will be Gold and Silver Size: Various sizes 26-56 inches, 20, Job; LI 014: Dress Uniform Tie - Dress Uniform Tie: 100% Polyester, Dark Navy, standard type with Black Neck Clasp. Tie Sizing: Regular and Long Length., 20, Job; LI 015: Dress Uniform Shoes - Dress Uniform Shoes: High Gloss Professional Oxfords (Bates Lites, Rocky, Fire Earth H2O or Thorgood shoes) The soles must be slip resistant. Color: High Gloss Black Sizes 6-16 mens med-xxx wide, 20, Job; LI 016: Braid Color - Braid Color: Gold, 300, Job; LI 017: Braid Color - Braid Color: Silver, 300, Job; LI 018: Braid Color - Maltese Crosses: Gold, 100, Job; LI 019: Maltese Cross (Fabric) Maltese Crosses: Gold, 100, Job; LI 020: Maltese Cross (Fabric) Maltese Crosses: Silver, 100, Job; LI 021: Coat and Shirt Badge Coat and Shirt Badge Manufacture: Smith & Warren Style: S-158 with 5/16# Center Seal Color: Gold Plate or Rhodium with Red background on center seal. Center seal will have scramble or rank of position. Rank Structure furnished by Customer., 50, Job; LI 022: Chest Name Plate Chest Name Plate Style Manufacture: Hook Fast Style: # QS-6 with 3550 Emblem (FORT BELVOIR) Color: Gold or Silver with the following engraving (Black) First Line: First Initial Last Name Second Line: Rank of Individual., 50, Job; LI 023: Hat Badge - Hat Badge Manufacture: Smith & Warren Style: 1 5/8# Plain with Screw Post Color: Silver or Gold, Rank insignia, 20, Job; LI 024: Lapel Insignia - Smith & Warren Style: 1 3/16# Plain with double clutch post. Color: Silver or Gold, Fire department rank insignia, 50, Job; LI 025: Collar Insignia - Collar Insignia Manufacture: Smith & Warren Style: C501M, with double clutch post. Color: Silver or Gold, with 463, 464, 465, or 466., 50, Job; LI 026: Performance Training Short - ST-312 Performance Training Short Manufacture: Sport-Tek Color: True Navy Material: 5.3 oz. 100% Cationic polyester flat back mesh, elastic waistband with continuous loop draw-cord, side pockets and back hip pocket, 9# inseam Size: X-Small thru 4XL, 300, Job; LI 027: Tee Shirt SS - #2000 or 2000L Ultra Cotton Short Sleeve T-Shirt Manufacture: Gildan Color: Navy Blue (32C) and White (30N) Material: 100% Cotton, 6 oz. preshrunk jersey knit. Size: Small thru 5XL or XLT thru 3XLT White Silkscreen: Department Logo on Left Chest and Fort Belvoir Fire & Rescue on back of Navy shirts. Navy Blue Silkscreen: Department Logo on Left Chest on White shirts., 600, Job; LI 028: Tee Shirt LS - 2400 Ultra Cotton Long Sleeve T-Shirt Manufacture: Gildan Color: Navy Blue (32C) and White (30N) Material: 100% Cotton, 6 oz. preshrunk jersey knit with knit cuffs Size: Small thru 5XL or XLT thru 3XLT White Silkscreen: Department Logo on Left Chest and Fort Belvoir Fire & Rescue on back of Navy shirts. Navy Blue Silkscreen: Department Logo on Left Chest on White shirts., 600, Job; LI 029: Sweat Shirt LS - #18000 Heavy Blend Adult Crewneck Sweatshirt Manufacture: Gildan Color: Navy Blue (32C) Material: 50% Cotton/50% Polyester Fleece, 8 oz. preshrunk fleece. Size: Small thru 5XL or XLT thru 3XLT White Silkscreen: Department Logo on Left Chest and Fort Belvoir Fire & Rescue on back of Navy shirts., 300, Job; LI 030: Sweat Pant - #12300 Dry Blend Open Bottom Pocketed Sweatpants Manufacture: Gildan Color: Navy Blue (32C) Material: 50% Cotton/50% Polyester Dry Blend Fleece, 9.3 oz. preshrunk fleece. Size: Small thru 2XL Vendor will provide White Silkscreen: Department Logo on front left leg., 300, Job; LI 031: Lined Jacket - Lined Eisenhower Jacket Manufacture: Dickie Color: Navy Blue (Dark) Material: 65% Polyester/35% Cotton with Nylon Taffeta Quilted to Polyurethane Foam. Style: Size: S-5 XL Regular and S-3XL Long, 125, Job; LI 032: Wool Cap - Flex-Fit Wool Cap Manufacture: Richardson, Style: 585 Color: Navy Material: Pro-Wool blend stretch fabric; Pro-Crown shape with buckram-fused front panels; comfort-stretch sweatband; pre-curved PE v isor with eight rows of stitching. Size: SM-MD and LG-XL., 125, Job; LI 033: Knit Cap - Knit Stocking Cap Manufacture: Port Authority, Style: CP90 Color: Navy Material: 100% Acrylic with 3 inch folding cuff Size: One size Embroider Fort Belvoir Fire and Emergency Services Logo on front of cap. Embroidery thread colors Red & White. Logo design will be provided by customer., 125, Job; LI 034: Knit Cap (Skull) - Knit Skull Cap Manufacture: Port Authority, Style: CP94 Color: Navy Material: 100% Acrylic Size: One size Embroider Fort Belvoir Fire and Emergency Services Logo on front of cap. Embroidery thread colors Red & White. Logo design will be provided by customer., 125, Job; LI 035: Steel Toe Safety Boot - 6# Easy Escape Steel Toe Safety Boots Manufacture: Red-Back Boot Company Color: Black Material: 100% full-grain black leather with TPU (Thermoplastic Polyurethane) soles are oil/acid/slip resistant while the PU (Polyur ethane) shock-absorbing mid-soles. Slip Resistant - MARK II Machine tested slip resistant on oil, acid & water. Footwear must meet OSHA & ASTM F2413-05 standards for Electrical Hazards and Steel Toe meets OSHA & ASTM F2413-05 standards for Impact & Compression. Various sizes: 6-16 med-xxx wide, 50, Job; LI 036: Station Boot with Composit Toe - Station Boot with Composite Toe Manufacture: Red-Back Boot Company Color: Black Material: 100% full-grain black leather with TPU (Thermoplastic Polyurethane) soles are oil/acid/slip resistant while the PU (Polyur ethane) shock-absorbing mid-soles. Slip Resistant - MARK II Machine tested slip resistant on oil, acid & water. Footwear must meet OSHA & ASTM F2413-05 standards for Electrical Hazards and Composite Toe meets OSHA & ASTM F2413-05 standards for Impact & Compression. Various sizes: 6-16 med-xxx wide, 50, Job; Option 2 Period of Performance: 09/29/2016 - 09/28/2017 LI 001: Station Pant - 7.5 oz Nomex IIIA Full-Cut Station Wear Pant Manufacture: Workrite, Series 400 or 402 Color: Navy Blue Materials: Made from 7.5 oz Nomex. IIIA Cut/Fit: Full Cut Stitch: Triple-stitched, feld-locked outer seams and seat seam for unparalleled durability. All other seams, including zipper area, are double-stitched Fly Zipper: Solid brass zipper Front Pockets: Two front deep-inset pockets Rear Pockets: Two large rear welt pockets, one with button Waist Band: Fully finished waistband with belt loops Creases: Permanent creases Appearance: Pressed and autoclaved Certification : NFPA 1975 station uniform standard Waist and Inseam Sizes: Various sizes Waist 28-54, inseam to 34" to 46, 175, Job; LI 002: Station Shirt SS - 4.5 oz Nomex IIIA Firefighter Shirt Manufacture: Workrite 730NX45 Color: Navy Blue Materials: Made with 4.5 oz Nomex?? IIIA Sleeve Length: Short Sleeve Shirt Tail: Extra-long shirt tail Shirt Pockets: Two box-pleated breast pockets with scalloped flaps. Pocket flaps have hook-and-loop closures with decorative buttons. Left pocket features a pencil slot and above it, a badge tab Shirt Epaulets: Shoulder epaulets secured with Melamine buttons Military Creases: Five sewn-in military creases Collar: Collar band Closure: Double-stitched front placket with heavy-duty snap closure and decorative Melamine buttons Appearance: Pressed and autoclaved Certification: NFPA 1975 station uniform standard, 175, Job; LI 003: Coveralls - 4.5 oz. Nomex IIIA Coveralls Manufacture: Workrite, Series 110 (110NMX-45) Color: Navy Blue with Silver Scotchlite Reflective Trim Package Materials: Made from 7.5 oz Nomex?? IIIA Style: Deep #Action back# for greater ease of movement, large front and rear pockets, a pocket pass-thru and finished wrist cuffs that are snap adjustable., 55, Job; LI 004: Job Shirt - Zip Front Job Shirt Manufacture: Game Color: Navy Blue Style# 8070 Materials: 12 oz. 95/5 Cotton/Polyester super weight fleece, Cotton anti-curling canvas collar and elbow patches Stain Resistant finish, No roll collar, Chest pocket with Velcro divider, Hand pockets on both sides, Mic pocket at both shoulders and Pen pockets on left sleeve. Size: X-Small thru 5XL, Regular and Tall cut, 110, Job; LI 005: Garrison Leather Belt - Garrison Leather Belt Manufacture: Duty-man Color: Black with Gold or Silver Buckle Size: Various sizes 26-56 inches, 55, Job; LI 006: Station Shirt LS - 4.5 oz Nomex IIIA Firefighter Shirt Manufacture: Workrite 735NX45 Color: Navy Blue Materials: Made with 4.5 oz Nomex?? IIIA Sleeve Length: Long Sleeve Shirt Tail: Extra-long shirt tail Shirt Pockets: Two box-pleated breast pockets with scalloped flaps. Pocket flaps have hook-and-loop closures with decorative buttons. Left pocket features a pencil slot and above it, a badge tab Shirt Epaulets: Shoulder epaulets secured with Melamine buttons Military Creases: Five sewn-in military creases Collar: Collar band Closure: Double-stitched front placket with heavy-duty snap closure and decorative Melamine buttons Appearance: Pressed and autoclaved Certification: NFPA 1975 station uniform standard Shirt Sizes: Medium through XXXX-Large. Shirts will include a name panel of same material as the shirt and it will be sewn on the right side of the shirt above pocket flap. The name panel will have the individual#s first initial followed by a period and last name embroidered on the name panel. The name embroidery will be silver in color or gold. The shirt will have the embroidered badge panel on the left breast over the left breast pocket. Based on the rank will determine the badge panel. Customer will provide Department Patches and vendor will sew the patch on the left shoulder of each shirt (one patch per shirt). Collars: The collars of the officer#s shirt will have rank embroidered: the rank will be indicated by standard fire department bulges and the customer will provide the number and type of bugles at the time of sizing of the employee., 175, Job; LI 007: Dress Shirt LS - Paragon Plus Poplin Class B Shirt (Long Sleeve) Manufacture: Elbeco Style: P877 Color: White Material: 65% Polyester/35% Cotton with poplin weave. Weight: 4.25 oz/sq yd-7.25 oz/linear yd. Size: Various 14-22 Neck, 29-40 Sleeve Length, 50, Job; LI 008: Dress Shirt SS - Paragon Plus Poplin Class B Shirt (Short Sleeve) Manufacture: Elbeco Style: P867 Color: White Material: 65% Polyester/35% Cotton with poplin weave. Weight: 4.25 oz/sq yd-7.25 oz/linear yd. Size: Various 14-22 Neck, 29-40 Sleeve Length, 50, Job; LI 009: Dress Coat - Double Breasted Dress Coat: (Elbeco Style #DC13820) The Double Breasted coat will be fully lined and constructed of 100% polyester, 7 oz./sq. yd./ 11.5 oz./linear yd. Serge Weave Navy Blue Materials. It will have a permanent badge tab on left breast, inside Breast pocket, shoulder pads and front interlining panels for enhanced drape. Additionally it will have 8-button front, peak lapels. Buttons: Chief Officers coat buttons are to be gold with raised FD on them and Captains, Lieutenants and Firefighters buttons are to be silver with raised FD on them. Badge Tab: Will be placed on the left side center ?? to 1 inch above the line of the breast pocket (Note: This coat will not have external pockets). Sleeve Braid: Bottom Row will be positioned 3# above bottom of sleeve. Additional rows will be spaced ??# apart. Braid will be on top side of sleeve. Braid Color: Chief Officers # gold braid and will be based on the rank i.e. Fire Chief will have 5 braids, Deputy Chief will have 4 braids, Assistant Chief will have 3 braids, Battalion and Fire Marshals will have 2 braids. Captains will have 2 silver braids; Lieutenants will have 1 silver braid on the sleeves. Maltese Crosses: Will be used to denote the years of service. If used with sleeve braids, they will be located ??# above top row of braids. If no braid is used they will be located 3# above bottom of to bottom of Maltese crosses. Color of Crosses: Chief Officers # Gold. Captains, Lieutenants and Fire fighters # Silver. 1 Maltese Cross will represent 5 years of service. Fire Department Patch: Customer will provide Departmental Patch and vendor will sew it on the left shoulder of coat. 1 per coat Coat sizing: Various sizes 26-54., 15, Job; LI 010: Dress Pant - Dress Uniform Pants: (Elbeco Style # E8941 and # E8945) The dress uniform pants will be 100% polyester, 7 oz. /sq. yd. | 11.5 oz. /linear yd. Navy Blue Serge Weave Materials. Pockets will be Extra-deep quarter-top front pockets, two back pockets with button tab on left. Belt loops will be 7/8" lined belt loops. Pant Sizing: Various sizes 26-54., 15, Job; LI 011: Dress Shirt LS - Dress Uniform Shirt: (Elbeco Style# 310 White and 313 Light Blue) The dress uniform shirt will be long sleeve and constructed of 100% stretched textured polyester, 5#5.5 oz. /sq. yd. | 9.5#10 oz. /linear yd. Tropical with Nano-Tex#, (coolest comfort for permanent moisture management and protection). Features to include: Shoulder straps crossed stitched symmetrically for neater appearance, pleated pockets, scalloped pocket flaps with Velcro closures, matching buttons, full badge sling, stitched-in military creases and conventional collar and band with permanent collar stays. Shirt Color: White for Chief Officers and Captains, Medium Blue for Lieutenants and Firefighters. Fire Department Patch: Customer will provide Departmental Patch and vendor will sew it on the left shoulder of shirt 1 per shirt Shirt Sizing: Various sizes 26-54, 15, Job; LI 012: Bell Crown Type Hat - Bell Crown Type Hat (Stovepipe style): Bayly Style #9807 Navy Blue or White. White will be worn by Chief Officers and Captains. Navy Blue will be worn by Fire Marshals, Lieutenants and Firefighters. Each hat will have black, silver or gold strap. Strap color will be determined by rank. Hat Sizing: Various sizes, 6-12, 15, Job; LI 013: Dress Belt - Dress Uniform Belts: Basket Weave Style # Black leather 1 3/4# wide. Buckles will be Gold and Silver Size: Various sizes 26-56 inches, 15, Job; LI 014: Dress Uniform Tie - Dress Uniform Tie: 100% Polyester, Dark Navy, standard type with Black Neck Clasp. Tie Sizing: Regular and Long Length., 15, Job; LI 015: Dress Uniform Shoes - Dress Uniform Shoes: High Gloss Professional Oxfords (Bates Lites, Rocky, Fire Earth H2O or Thorgood shoes) The soles must be slip resistant. Color: High Gloss Black Sizes 6-16 mens med-xxx wide, 15, Job; LI 016: Braid Color - Braid Color: Gold, 300, Job; LI 017: Braid Color - Braid Color: Silver, 300, Job; LI 018: Braid Color - Maltese Crosses: Gold, 100, Job; LI 019: Maltese Cross (Fabric) Maltese Crosses: Gold, 100, Job; LI 020: Maltese Cross (Fabric) Maltese Crosses: Silver, 100, Job; LI 021: Coat and Shirt Badge Coat and Shirt Badge Manufacture: Smith & Warren Style: S-158 with 5/16# Center Seal Color: Gold Plate or Rhodium with Red background on center seal. Center seal will have scramble or rank of position. Rank Structure furnished by Customer., 25, Job; LI 022: Chest Name Plate Chest Name Plate Style Manufacture: Hook Fast Style: # QS-6 with 3550 Emblem (FORT BELVOIR) Color: Gold or Silver with the following engraving (Black) First Line: First Initial Last Name Second Line: Rank of Individual., 50, Job; LI 023: Hat Badge - Hat Badge Manufacture: Smith & Warren Style: 1 5/8# Plain with Screw Post Color: Silver or Gold, Rank insignia, 15, Job; LI 024: Lapel Insignia - Smith & Warren Style: 1 3/16# Plain with double clutch post. Color: Silver or Gold, Fire department rank insignia, 30, Job; LI 025: Collar Insignia - Collar Insignia Manufacture: Smith & Warren Style: C501M, with double clutch post. Color: Silver or Gold, with 463, 464, 465, or 466., 30, Job; LI 026: Performance Training Short - ST-312 Performance Training Short Manufacture: Sport-Tek Color: True Navy Material: 5.3 oz. 100% Cationic polyester flat back mesh, elastic waistband with continuous loop draw-cord, side pockets and back hip pocket, 9# inseam Size: X-Small thru 4XL, 300, Job; LI 027: Tee Shirt SS - #2000 or 2000L Ultra Cotton Short Sleeve T-Shirt Manufacture: Gildan Color: Navy Blue (32C) and White (30N) Material: 100% Cotton, 6 oz. preshrunk jersey knit. Size: Small thru 5XL or XLT thru 3XLT White Silkscreen: Department Logo on Left Chest and Fort Belvoir Fire & Rescue on back of Navy shirts. Navy Blue Silkscreen: Department Logo on Left Chest on White shirts., 600, Job; LI 028: Tee Shirt LS - 2400 Ultra Cotton Long Sleeve T-Shirt Manufacture: Gildan Color: Navy Blue (32C) and White (30N) Material: 100% Cotton, 6 oz. preshrunk jersey knit with knit cuffs Size: Small thru 5XL or XLT thru 3XLT White Silkscreen: Department Logo on Left Chest and Fort Belvoir Fire & Rescue on back of Navy shirts. Navy Blue Silkscreen: Department Logo on Left Chest on White shirts., 600, Job; LI 029: Sweat Shirt LS - #18000 Heavy Blend Adult Crewneck Sweatshirt Manufacture: Gildan Color: Navy Blue (32C) Material: 50% Cotton/50% Polyester Fleece, 8 oz. preshrunk fleece. Size: Small thru 5XL or XLT thru 3XLT White Silkscreen: Department Logo on Left Chest and Fort Belvoir Fire & Rescue on back of Navy shirts., 300, Job; LI 030: Sweat Pant - #12300 Dry Blend Open Bottom Pocketed Sweatpants Manufacture: Gildan Color: Navy Blue (32C) Material: 50% Cotton/50% Polyester Dry Blend Fleece, 9.3 oz. preshrunk fleece. Size: Small thru 2XL Vendor will provide White Silkscreen: Department Logo on front left leg., 300, Job; LI 031: Lined Jacket - Lined Eisenhower Jacket Manufacture: Dickie Color: Navy Blue (Dark) Material: 65% Polyester/35% Cotton with Nylon Taffeta Quilted to Polyurethane Foam. Style: Size: S-5 XL Regular and S-3XL Long, 125, Job; LI 032: Wool Cap - Flex-Fit Wool Cap Manufacture: Richardson, Style: 585 Color: Navy Material: Pro-Wool blend stretch fabric; Pro-Crown shape with buckram-fused front panels; comfort-stretch sweatband; pre-curved PE v isor with eight rows of stitching. Size: SM-MD and LG-XL., 125, Job; LI 033: Knit Cap - Knit Stocking Cap Manufacture: Port Authority, Style: CP90 Color: Navy Material: 100% Acrylic with 3 inch folding cuff Size: One size Embroider Fort Belvoir Fire and Emergency Services Logo on front of cap. Embroidery thread colors Red & White. Logo design will be provided by customer., 125, Job; LI 034: Knit Cap (Skull) - Knit Skull Cap Manufacture: Port Authority, Style: CP94 Color: Navy Material: 100% Acrylic Size: One size Embroider Fort Belvoir Fire and Emergency Services Logo on front of cap. Embroidery thread colors Red & White. Logo design will be provided by customer., 125, Job; LI 035: Steel Toe Safety Boot - 6# Easy Escape Steel Toe Safety Boots Manufacture: Red-Back Boot Company Color: Black Material: 100% full-grain black leather with TPU (Thermoplastic Polyurethane) soles are oil/acid/slip resistant while the PU (Polyur ethane) shock-absorbing mid-soles. Slip Resistant - MARK II Machine tested slip resistant on oil, acid & water. Footwear must meet OSHA & ASTM F2413-05 standards for Electrical Hazards and Steel Toe meets OSHA & ASTM F2413-05 standards for Impact & Compression. Various sizes: 6-16 med-xxx wide, 25, Job; LI 036: Station Boot with Composit Toe - Station Boot with Composite Toe Manufacture: Red-Back Boot Company Color: Black Material: 100% full-grain black leather with TPU (Thermoplastic Polyurethane) soles are oil/acid/slip resistant while the PU (Polyur ethane) shock-absorbing mid-soles. Slip Resistant - MARK II Machine tested slip resistant on oil, acid & water. Footwear must meet OSHA & ASTM F2413-05 standards for Electrical Hazards and Composite Toe meets OSHA & ASTM F2413-05 standards for Impact & Compression. Various sizes: 6-16 med-xxx wide, 25, Job; Option 3 Period of Performance: 09/29/2017 - 09/28/2018 LI 001: Station Pant - 7.5 oz Nomex IIIA Full-Cut Station Wear Pant Manufacture: Workrite, Series 400 or 402 Color: Navy Blue Materials: Made from 7.5 oz Nomex. IIIA Cut/Fit: Full Cut Stitch: Triple-stitched, feld-locked outer seams and seat seam for unparalleled durability. All other seams, including zipper area, are double-stitched Fly Zipper: Solid brass zipper Front Pockets: Two front deep-inset pockets Rear Pockets: Two large rear welt pockets, one with button Waist Band: Fully finished waistband with belt loops Creases: Permanent creases Appearance: Pressed and autoclaved Certification : NFPA 1975 station uniform standard Waist and Inseam Sizes: Various sizes Waist 28-54, inseam to 34" to 46, 175, Job; LI 002: Station Shirt SS - 4.5 oz Nomex IIIA Firefighter Shirt Manufacture: Workrite 730NX45 Color: Navy Blue Materials: Made with 4.5 oz Nomex?? IIIA Sleeve Length: Short Sleeve Shirt Tail: Extra-long shirt tail Shirt Pockets: Two box-pleated breast pockets with scalloped flaps. Pocket flaps have hook-and-loop closures with decorative buttons. Left pocket features a pencil slot and above it, a badge tab Shirt Epaulets: Shoulder epaulets secured with Melamine buttons Military Creases: Five sewn-in military creases Collar: Collar band Closure: Double-stitched front placket with heavy-duty snap closure and decorative Melamine buttons Appearance: Pressed and autoclaved Certification: NFPA 1975 station uniform standard, 175, Job; LI 003: Coveralls - 4.5 oz. Nomex IIIA Coveralls Manufacture: Workrite, Series 110 (110NMX-45) Color: Navy Blue with Silver Scotchlite Reflective Trim Package Materials: Made from 7.5 oz Nomex?? IIIA Style: Deep #Action back# for greater ease of movement, large front and rear pockets, a pocket pass-thru and finished wrist cuffs that are snap adjustable., 55, Job; LI 004: Job Shirt - Zip Front Job Shirt Manufacture: Game Color: Navy Blue Style# 8070 Materials: 12 oz. 95/5 Cotton/Polyester super weight fleece, Cotton anti-curling canvas collar and elbow patches Stain Resistant finish, No roll collar, Chest pocket with Velcro divider, Hand pockets on both sides, Mic pocket at both shoulders and Pen pockets on left sleeve. Size: X-Small thru 5XL, Regular and Tall cut, 110, Job; LI 005: Garrison Leather Belt - Garrison Leather Belt Manufacture: Duty-man Color: Black with Gold or Silver Buckle Size: Various sizes 26-56 inches, 55, Job; LI 006: Station Shirt LS - 4.5 oz Nomex IIIA Firefighter Shirt Manufacture: Workrite 735NX45 Color: Navy Blue Materials: Made with 4.5 oz Nomex?? IIIA Sleeve Length: Long Sleeve Shirt Tail: Extra-long shirt tail Shirt Pockets: Two box-pleated breast pockets with scalloped flaps. Pocket flaps have hook-and-loop closures with decorative buttons. Left pocket features a pencil slot and above it, a badge tab Shirt Epaulets: Shoulder epaulets secured with Melamine buttons Military Creases: Five sewn-in military creases Collar: Collar band Closure: Double-stitched front placket with heavy-duty snap closure and decorative Melamine buttons Appearance: Pressed and autoclaved Certification: NFPA 1975 station uniform standard Shirt Sizes: Medium through XXXX-Large. Shirts will include a name panel of same material as the shirt and it will be sewn on the right side of the shirt above pocket flap. The name panel will have the individual#s first initial followed by a period and last name embroidered on the name panel. The name embroidery will be silver in color or gold. The shirt will have the embroidered badge panel on the left breast over the left breast pocket. Based on the rank will determine the badge panel. Customer will provide Department Patches and vendor will sew the patch on the left shoulder of each shirt (one patch per shirt). Collars: The collars of the officer#s shirt will have rank embroidered: the rank will be indicated by standard fire department bulges and the customer will provide the number and type of bugles at the time of sizing of the employee., 175, Job; LI 007: Dress Shirt LS - Paragon Plus Poplin Class B Shirt (Long Sleeve) Manufacture: Elbeco Style: P877 Color: White Material: 65% Polyester/35% Cotton with poplin weave. Weight: 4.25 oz/sq yd-7.25 oz/linear yd. Size: Various 14-22 Neck, 29-40 Sleeve Length, 50, Job; LI 008: Dress Shirt SS - Paragon Plus Poplin Class B Shirt (Short Sleeve) Manufacture: Elbeco Style: P867 Color: White Material: 65% Polyester/35% Cotton with poplin weave. Weight: 4.25 oz/sq yd-7.25 oz/linear yd. Size: Various 14-22 Neck, 29-40 Sleeve Length, 50, Job; LI 009: Dress Coat - Double Breasted Dress Coat: (Elbeco Style #DC13820) The Double Breasted coat will be fully lined and constructed of 100% polyester, 7 oz./sq. yd./ 11.5 oz./linear yd. Serge Weave Navy Blue Materials. It will have a permanent badge tab on left breast, inside Breast pocket, shoulder pads and front interlining panels for enhanced drape. Additionally it will have 8-button front, peak lapels. Buttons: Chief Officers coat buttons are to be gold with raised FD on them and Captains, Lieutenants and Firefighters buttons are to be silver with raised FD on them. Badge Tab: Will be placed on the left side center ?? to 1 inch above the line of the breast pocket (Note: This coat will not have external pockets). Sleeve Braid: Bottom Row will be positioned 3# above bottom of sleeve. Additional rows will be spaced ??# apart. Braid will be on top side of sleeve. Braid Color: Chief Officers # gold braid and will be based on the rank i.e. Fire Chief will have 5 braids, Deputy Chief will have 4 braids, Assistant Chief will have 3 braids, Battalion and Fire Marshals will have 2 braids. Captains will have 2 silver braids; Lieutenants will have 1 silver braid on the sleeves. Maltese Crosses: Will be used to denote the years of service. If used with sleeve braids, they will be located ??# above top row of braids. If no braid is used they will be located 3# above bottom of to bottom of Maltese crosses. Color of Crosses: Chief Officers # Gold. Captains, Lieutenants and Fire fighters # Silver. 1 Maltese Cross will represent 5 years of service. Fire Department Patch: Customer will provide Departmental Patch and vendor will sew it on the left shoulder of coat. 1 per coat Coat sizing: Various sizes 26-54., 15, Job; LI 010: Dress Pant - Dress Uniform Pants: (Elbeco Style # E8941 and # E8945) The dress uniform pants will be 100% polyester, 7 oz. /sq. yd. | 11.5 oz. /linear yd. Navy Blue Serge Weave Materials. Pockets will be Extra-deep quarter-top front pockets, two back pockets with button tab on left. Belt loops will be 7/8" lined belt loops. Pant Sizing: Various sizes 26-54., 15, Job; LI 011: Dress Shirt LS - Dress Uniform Shirt: (Elbeco Style# 310 White and 313 Light Blue) The dress uniform shirt will be long sleeve and constructed of 100% stretched textured polyester, 5#5.5 oz. /sq. yd. | 9.5#10 oz. /linear yd. Tropical with Nano-Tex#, (coolest comfort for permanent moisture management and protection). Features to include: Shoulder straps crossed stitched symmetrically for neater appearance, pleated pockets, scalloped pocket flaps with Velcro closures, matching buttons, full badge sling, stitched-in military creases and conventional collar and band with permanent collar stays. Shirt Color: White for Chief Officers and Captains, Medium Blue for Lieutenants and Firefighters. Fire Department Patch: Customer will provide Departmental Patch and vendor will sew it on the left shoulder of shirt 1 per shirt Shirt Sizing: Various sizes 26-54, 15, Job; LI 012: Bell Crown Type Hat - Bell Crown Type Hat (Stovepipe style): Bayly Style #9807 Navy Blue or White. White will be worn by Chief Officers and Captains. Navy Blue will be worn by Fire Marshals, Lieutenants and Firefighters. Each hat will have black, silver or gold strap. Strap color will be determined by rank. Hat Sizing: Various sizes, 6-12, 15, Job; LI 013: Dress Belt - Dress Uniform Belts: Basket Weave Style # Black leather 1 3/4# wide. Buckles will be Gold and Silver Size: Various sizes 26-56 inches, 15, Job; LI 014: Dress Uniform Tie - Dress Uniform Tie: 100% Polyester, Dark Navy, standard type with Black Neck Clasp. Tie Sizing: Regular and Long Length., 15, Job; LI 015: Dress Uniform Shoes - Dress Uniform Shoes: High Gloss Professional Oxfords (Bates Lites, Rocky, Fire Earth H2O or Thorgood shoes) The soles must be slip resistant. Color: High Gloss Black Sizes 6-16 mens med-xxx wide, 15, Job; LI 016: Braid Color - Braid Color: Gold, 300, Job; LI 017: Braid Color - Braid Color: Silver, 300, Job; LI 018: Braid Color - Maltese Crosses: Gold, 100, Job; LI 019: Maltese Cross (Fabric) Maltese Crosses: Gold, 100, Job; LI 020: Maltese Cross (Fabric) Maltese Crosses: Silver, 100, Job; LI 021: Coat and Shirt Badge Coat and Shirt Badge Manufacture: Smith & Warren Style: S-158 with 5/16# Center Seal Color: Gold Plate or Rhodium with Red background on center seal. Center seal will have scramble or rank of position. Rank Structure furnished by Customer., 25, Job; LI 022: Chest Name Plate Chest Name Plate Style Manufacture: Hook Fast Style: # QS-6 with 3550 Emblem (FORT BELVOIR) Color: Gold or Silver with the following engraving (Black) First Line: First Initial Last Name Second Line: Rank of Individual., 50, Job; LI 023: Hat Badge - Hat Badge Manufacture: Smith & Warren Style: 1 5/8# Plain with Screw Post Color: Silver or Gold, Rank insignia, 15, Job; LI 024: Lapel Insignia - Smith & Warren Style: 1 3/16# Plain with double clutch post. Color: Silver or Gold, Fire department rank insignia, 30, Job; LI 025: Collar Insignia - Collar Insignia Manufacture: Smith & Warren Style: C501M, with double clutch post. Color: Silver or Gold, with 463, 464, 465, or 466., 30, Job; LI 026: Performance Training Short - ST-312 Performance Training Short Manufacture: Sport-Tek Color: True Navy Material: 5.3 oz. 100% Cationic polyester flat back mesh, elastic waistband with continuous loop draw-cord, side pockets and back hip pocket, 9# inseam Size: X-Small thru 4XL, 300, Job; LI 027: Tee Shirt SS - #2000 or 2000L Ultra Cotton Short Sleeve T-Shirt Manufacture: Gildan Color: Navy Blue (32C) and White (30N) Material: 100% Cotton, 6 oz. preshrunk jersey knit. Size: Small thru 5XL or XLT thru 3XLT White Silkscreen: Department Logo on Left Chest and Fort Belvoir Fire & Rescue on back of Navy shirts. Navy Blue Silkscreen: Department Logo on Left Chest on White shirts., 600, Job; LI 028: Tee Shirt LS - 2400 Ultra Cotton Long Sleeve T-Shirt Manufacture: Gildan Color: Navy Blue (32C) and White (30N) Material: 100% Cotton, 6 oz. preshrunk jersey knit with knit cuffs Size: Small thru 5XL or XLT thru 3XLT White Silkscreen: Department Logo on Left Chest and Fort Belvoir Fire & Rescue on back of Navy shirts. Navy Blue Silkscreen: Department Logo on Left Chest on White shirts., 600, Job; LI 029: Sweat Shirt LS - #18000 Heavy Blend Adult Crewneck Sweatshirt Manufacture: Gildan Color: Navy Blue (32C) Material: 50% Cotton/50% Polyester Fleece, 8 oz. preshrunk fleece. Size: Small thru 5XL or XLT thru 3XLT White Silkscreen: Department Logo on Left Chest and Fort Belvoir Fire & Rescue on back of Navy shirts., 300, Job; LI 030: Sweat Pant - #12300 Dry Blend Open Bottom Pocketed Sweatpants Manufacture: Gildan Color: Navy Blue (32C) Material: 50% Cotton/50% Polyester Dry Blend Fleece, 9.3 oz. preshrunk fleece. Size: Small thru 2XL Vendor will provide White Silkscreen: Department Logo on front left leg., 300, Job; LI 031: Lined Jacket - Lined Eisenhower Jacket Manufacture: Dickie Color: Navy Blue (Dark) Material: 65% Polyester/35% Cotton with Nylon Taffeta Quilted to Polyurethane Foam. Style: Size: S-5 XL Regular and S-3XL Long, 125, Job; LI 032: Wool Cap - Flex-Fit Wool Cap Manufacture: Richardson, Style: 585 Color: Navy Material: Pro-Wool blend stretch fabric; Pro-Crown shape with buckram-fused front panels; comfort-stretch sweatband; pre-curved PE v isor with eight rows of stitching. Size: SM-MD and LG-XL., 125, Job; LI 033: Knit Cap - Knit Stocking Cap Manufacture: Port Authority, Style: CP90 Color: Navy Material: 100% Acrylic with 3 inch folding cuff Size: One size Embroider Fort Belvoir Fire and Emergency Services Logo on front of cap. Embroidery thread colors Red & White. Logo design will be provided by customer., 125, Job; LI 034: Knit Cap (Skull) - Knit Skull Cap Manufacture: Port Authority, Style: CP94 Color: Navy Material: 100% Acrylic Size: One size Embroider Fort Belvoir Fire and Emergency Services Logo on front of cap. Embroidery thread colors Red & White. Logo design will be provided by customer., 125, Job; LI 035: Steel Toe Safety Boot - 6# Easy Escape Steel Toe Safety Boots Manufacture: Red-Back Boot Company Color: Black Material: 100% full-grain black leather with TPU (Thermoplastic Polyurethane) soles are oil/acid/slip resistant while the PU (Polyur ethane) shock-absorbing mid-soles. Slip Resistant - MARK II Machine tested slip resistant on oil, acid & water. Footwear must meet OSHA & ASTM F2413-05 standards for Electrical Hazards and Steel Toe meets OSHA & ASTM F2413-05 standards for Impact & Compression. Various sizes: 6-16 med-xxx wide, 25, Job; LI 036: Station Boot with Composit Toe - Station Boot with Composite Toe Manufacture: Red-Back Boot Company Color: Black Material: 100% full-grain black leather with TPU (Thermoplastic Polyurethane) soles are oil/acid/slip resistant while the PU (Polyur ethane) shock-absorbing mid-soles. Slip Resistant - MARK II Machine tested slip resistant on oil, acid & water. Footwear must meet OSHA & ASTM F2413-05 standards for Electrical Hazards and Composite Toe meets OSHA & ASTM F2413-05 standards for Impact & Compression. Various sizes: 6-16 med-xxx wide, 25, Job; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Belvoir intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Belvoir is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. For solicitation with multiple CLINs, each individual CLINs shall be priced and submitted on FEDBID. Pricing for multiple CLINS shall not be lumped into one line item, doing so your quote/proposal will not be considered for award. CLINs with $0 dollar shall be identified as NO CHARGE. In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposals, representations and certifications, etc.). You may attach documents with your offer when placing a bid. After you begin the bidding process the attachments feature is located on the 2nd page ?Line Items? or you may submit them to clientservices@fedbid.com to supplement your Bid (e.g., in response to a ?Brand name or Equal/Meet or Exceed? Requirement). Failure to provide any required documents prior to the proposal due date and time will deem your offer non-responsive and ineligible for award. In addition to providing pricing through the marketplace, Sellers must include certain?non-pricing?information as document(s) attached to their Bid, so they are received no later than the closing date and time of this Buy. Pricing will not be accepted if it is included in the attachment(s). Attachment(s) can total no more than 20 MB, whether multiple files or one file, and may be zipped to decrease their size. A Seller's failure to comply with these terms may result in its Bid being determined to benon-responsive. Lowest Price in accordance with line items and specifications DFAR Sub-Part 252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (MAR 2008) (a) Definitions. As used in this clause? (1) ?Contract financing payment? and ?invoice payment? have the meanings given in section 32.001 of the Federal Acquisition Regulation. (2) ?Electronic form? means any automated system that transmits information electronically from the initiating system to all affected systems. Facsimile, e-mail, and scanned documents are not acceptable electronic forms for submission of payment requests. However, scanned documents are acc -- Please refer to FedBid for complete list of contract requirement(s) and terms and conditions.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/notices/9a65f919b859c6a343315eaed56b4ee7)
Place of Performance: Address: Fort Belvoir, VA 22060; Zip Code: 22060
Record: SN03514238-W 20140918/140917000505-9a65f919b859c6a343315eaed56b4ee7 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

42 -- OPTION - Fire and Emergency Service Uniforms and Safety Shoes