SOLICITATION NOTICE
23 -- one (1) Articulated Dump Truck
- Notice Date
- 9/16/2014
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 336120
— Heavy Duty Truck Manufacturing
- Contracting Office
- USACE District, Philadelphia, 100 Penn Square East, Wanamaker Bldg (RM 643), Philadelphia, PA 19107-3390
- ZIP Code
- 19107-3390
- Solicitation Number
- W912BU-14-T-0048
- Response Due
- 9/19/2014
- Archive Date
- 11/15/2014
- Point of Contact
- Robert R Hilton III, 21565656911
- E-Mail Address
-
USACE District, Philadelphia
(robert.r.hilton@us.army.mil)
- Small Business Set-Aside
- N/A
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The U.S. Army Corps of Engineers, Philadelphia District, intends to award a firm fixed price Purchase Order for one (1) Articulated Dump Truck; including delivery final acceptance is at destination. The solicitation number is W912BU-14-T-0048 and is issued as a request for quotation (RFQ). This requirement is unrestricted; the NAICS code is 336120. Scope of Specifications and Requirements PROCUREMENT OF AN ARTICULATED DUMP TRUCK GENERAL REQUIREMENTS (Item#1)The Government seeks to purchase one (1) Articulated Dump Truck, diesel engine with at least 265hp with up to date emission standards. Must hold at least 18 cubic yards with a wheel base of at least 16' or more for lower ground pressure and operating weight of no more than 100,000 pounds to accommodate soft and marshy areas, capacities and all other equipment, features, accessories, training, manuals, and delivery as mentioned herein. Equipment must be of the latest design and current production model. Equipment must comply with all current, and in effect ANSI, OSHA, and U.S. Army Corps of Engineers safety requirements. Delivery to U.S. Army Corps of Engineers, Pedricktown Field Office, Building # 613, Artillery Road, Route 130, Pedricktown, New Jersey 08070. POC: Michael Cox, Office Phone 856-299-6032 (or) Cell Phone 609-929-0384. GENERAL DESIGN AND CONSTRUCTION REQUIREMENTS FOR TYPE AND STYLE OF ARTICULATED DUMP TRUCK Items listed can be considered as standard, optional or as accessories but shall be included into the lump sum unit price. ADDITIONAL FEATURES, STANDARD, OPTIONAL AND ACCESSORIAL FOR MODEL 329E HYDRAULIC EXCAVATORS Items listed can be considered as standard, optional or as accessories but shall be included into the lump sum unit price for item 1. In some cases these may have already been listed previously. ENGINE AND COOLING Power Tech Plus 60909L inline 6, certified to EPA Tier 3 emissions Wet sleeve cylinder liners, variable geometry turbocharger External cooled EGR Dual element air cleaner with dust ejector valve and precleaner High pressure common rail fuel injection Fuel water separator Ground level fueling with provision for fast fill Serpentine drive belt with automatic tensioner Ether start aid Programmable auto shutdown and automatic turbo cool down/shutdown timer Direct drive, air sensing, viscous-drive fan Front mount radiator, charge air cooler, air conditioner condenser, pneumatic system cooling coil and transmission cooler Integral engine oil cooler, remote pressurized coolant reservoir, long life engine coolant and fan guard OPERATOR ENVIRONMENT AND SAFETY ROPS/FOPS certification Keyless start Tilt cab Programmable dump-body control settings Air conditioner Heater AM/FM radio Rear window guard Wiper/washer with intermittent control Tilt and telescoping steering wheel Fully adjustable, air suspension, heated, high back cloth and leather seat 3-in retractable operator seat belt Foldaway trainer seat with retractable seat belt 12 volt power outlet Cup holder Cooled/heated lunch box Deluxe monitoring system Backlit sealed switch module functions Dump body safety prop rod ELECTRICAL SYSTEM 24 volt system voltage 80 amp alternator Solid state electrical distribution system Battery disconnect Batteries, 2 x 950 CCA Drive lights Led rear turn signals/brake lights Electric horn in addition to air horn Reverse alarm 24 volt to 12 volt 15 amp converter POWERTRAIN, PNEUMATIC AND HYDRAULIC SYSTEM Ecomat 2+ fully automatic engine mounted planetary transmission Lock up torque converter Adaptive shift control Gear hold switch Integral transmission input retarder Automatic retarding Selectable retarder aggressiveness Single speed transfer case with inter-axle differential Transfer case sight glass Hydraulically actuated dry disc brakes, all wheels, with bolt on mud guards Engine mounted compressor Air drier with heater Closed center, load sensing system Single stage, dual acting, dump body tip cylinders Electro-hydraulic dump body control MISC. COMPONENTS and OPTIONAL ATTACHMENTS 23.5R25 radial earthmover tires with full size spare mounted on rim and inflated Engine service platform Remote grease banks Articulation lock Onboard weighing system with external load lights Tire pressure monitoring system MANUALS Two (2) complete sets of bound and printed parts, service, maintenance, lubrication charts, operations instructions and manuals are required, for machine and all accessories not installed at the factory. Two (2) sets, if available, in CD Rom format of all service, maintenance, lubrication charts, and operators instructions in addition to the printed sets. One set of any safety or operator's videos that may be available for this piece of equipment shall be provided to the C.O.R. WARRANTY (Item#2) The manufacturer shall provide at minimum at least a twelve (12) month factory warranty for all parts and labor. Manufacturer can offer an extended warranty along with a separate cost which would be evaluated at the time of award, and included as Item #2. DELIVERY Machine shall be delivered to: US Army Corps of Engineers, Pedricktown Field Office Artillery Road, Route 130 Building #613 Pedricktown, NJ 08067 P.O.C. for delivery shall be Michael Cox @ Office 856-299-6032 (or) Cell 609-929-0384 or call Shawn Burns @ Office 215-365-1892 / 215-656-3240. There shall be at least a three (3) working day advance notice prior to the machine leaving the contractor's facility for delivery. The manufacturer shall have the local authorized service company available at time of delivery to cover the operation of the machine prior to final inspection. Contractor will be responsible for any escorts or permits needed for the delivery. Contractor is responsible for the equipment and material to off load the machine and placed safely. ASSEMBLY OF MACHINE: Contractor must provide the man power and equipment to assemble the machine. The Corps will accept the machine only when it is fully assembled correctly by the contractor The machine will be inspected and tested before full acceptance of the machine. FINAL INSPECTION Final inspection of the machine shall be completed at destination, and after Government personnel have an opportunity to test and operate the new machine. Instructions, Conditions and Notices to Offerors This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 05-76. FAR Provisions and Clauses applicable to this acquisition are as follows (latest edition) are incorporated in their entirety): FAR 52.204-7, System for Award Management (Jul 2013) FAR 52.212-1, Instructions to Offerors - Commercial Items (Apr 2014) FAR 52.212-3, Offeror Representations and Certifications - Commercial Items (May 2014) FAR 52.212-4, Contract Terms and Conditions - Commercial Items (May 2014) FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items (DEVIATION 2013-O0019) (Jan 2014) FAR 52.246-17, Warranty of Supplies of a Noncomplex Nature (Jun 2003) Quotes are due by 1300 EST on 19 September 2014. Quotes can be delivered to the US Army Corps of Engineers, Philadelphia District, Wanamaker Bldg, 100 Penn Square East, Rm 643, Philadelphia, PA 19107-3390, Attn: Robert Hilton. Quotes may be submitted electronically to Robert Hilton, robert.r.hilton@usace.army.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA61/W912BU-14-T-0048/listing.html)
- Place of Performance
- Address: USACE District, Philadelphia 100 Penn Square East, Wanamaker Bldg (RM 643) Philadelphia PA
- Zip Code: 19107-3390
- Zip Code: 19107-3390
- Record
- SN03513890-W 20140918/140917000204-129e2847e8ec4ad9f3cd29428de8a9e5 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |