MODIFICATION
59 -- Runway Friction Measuring System
- Notice Date
- 8/26/2014
- Notice Type
- Modification/Amendment
- NAICS
- 334519
— Other Measuring and Controlling Device Manufacturing
- Contracting Office
- Department of the Air Force, Air Mobility Command, 319 CONF, 575 Tuskegee Airmen Blvd, Building 418, Grand Forks AFB, North Dakota, 58205, United States
- ZIP Code
- 58205
- Solicitation Number
- FA4659-14-Q-0035
- Archive Date
- 9/24/2014
- Point of Contact
- Jeff N. Karingithi, Phone: 7017475280, Matt D. Sanders, Phone: 701-747-5281
- E-Mail Address
-
jeff.karingithi.ke@us.af.mil, matt.sanders.1@us.af.mil
(jeff.karingithi.ke@us.af.mil, matt.sanders.1@us.af.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Combined Synopsis/Solicitation - Request for Quote (RFQ) Solicitation Number: F2A1SS4126A001 POC: SrA Jeff N. Karingithi, Grand Forks AFB, ND Phone: 701-747-5280 Email: Jeff.Karingithi.1@us.af.mil This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; proposals are being requested and a written solicitation will not be issued. The 319th Contracting Flight at 575 Tuskegee Airman Blvd bldg 418, Grand Forks AFB, ND 58205 intends to award a firm-fixed price purchase order for the purchase of a new Runway Friction Measuring System. Prospective contractors shall be registered in System for Award Management (SAM), previously Central Contractor Registration (CCR) Database in order to be considered for award. Registration may be accomplished at web site: https://www.sam.gov/. Please contact Jeff N. Karingithi if you have any questions. This is an acquisition for a Runway Friction Measuring System, as further defined in the price schedule. Award will be based on Lowest Price Technically Acceptable (LPTA). In order to be technically acceptable your proposal must meet the salient characteristics listed in the price schedule below. Quoted items that do not meet the minimum specifications will not be considered technically acceptable. All quotes must be returned to SrA Jeff N. Karingithi (Jeff.Karingithi.1@us.af.mil) NLT 9 September 2014 at 2:00 PM CDT. Offerors may use their company's format in lieu of this format when submitting their offer as long as it contains the following information: Offeror's Company Name:____________________ Offeror's CAGE code or DUNS number: _____________________________ Offeror's Tax ID________________ Size of Business (large, small, woman-owned, etc): ___________________ Offeror's POC/Phone: __________________________________________ Delivery: ___________ calendar days/week (Circle one) Prompt Payment Discount (if any): _________ Federal Supply Schedule Contract No. (if applicable): _________________________ Expiration Date (if applicable): __________________ PRICE SCHEDULE: ITEM DESCRIPTION OF MATERIAL OR SERVICES TO BE PURCHASED QUANTITY/UNIT UNIT PRICE TOTAL 0001 Runway Friction Measuring System: (description below) 1 EA tiny_mce_marker ________ tiny_mce_marker ________ EXTENDED TOTAL: $ DELIVERY WITHIN (days ARO): ALL ASPECTS OF THE CONTINUOUS FRICTION MEASURING EQUIPMENT MUST MAINTAIN COMPLIANCE WITH ALL APPLICABLE FEDERAL AVIATION ADMINISTRATION STANDARDS IAW ADVISORY CIRCULAR [EDIT: 150-5200-30] - FAA approved - Runway friction measurement systems that precisely, repeatedly and in real time measure runway and road surface friction - Able to measure friction on all types of pavements, specifically asphalt and concrete. - Retractable unit. - Designed to sustain rough usage and provide methods of equipment calibration. - Be able to conduct friction surveys at speeds of 40 and 60 mph (65 and 95 km/hr), within a tolerance of ±3 mph (±5 km/hr). - Customizable software to be tailored to local airfield. - Software meets FAA requirements. - The software need to be hands free when driving - Data is graphed as well as saved to an excel or detailed text file - No adjustments to the software should be required during the run. - Data averaged every 500 feet, and constant sensor reading being displayed - Device should hold calibration for the duration of the season (several months). - Minimum maintenance required - Include a complete set of the latest operation and maintenance manuals including guidelines for training personnel This RFQ is being issued as 100% Small Business Set-Aside; all responsible and technically acceptable offers will be accepted. This combined synopsis/solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-76. The NAICS code for the acquisition is 334519 and the size standard is 500 employees. The Government reserves the right to hold discussions with offerors. Discussions may or may not be held with offerors; therefore, each offerors initial quote should be complete and accurate. One award will be made based on which offer is fully in compliance with requirements, and provides the lowest priced technically acceptable offer. Offeror's quotations/proposals must be valid through 30 Sep 2014. The following provisions and clauses can be viewed through Internet access at the Air Force FAR Site, http://farsite.hill.af.mil. In Accordance with FAR 52.252-1 and FAR 52.252-2, the following provisions and clauses are incorporated by reference or by full text (see prescription for use): FAR 52.204-7 System For Award Management FAR 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards. FAR 52.204-13 System for Award Management Maintenance. FAR 52.209-6 Protecting the Governments Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment FAR 52.212-1 Instructions to Offerors FAR 52.212-3 Offeror Representations and Certifications - Commercial Items FAR 52.212-4 Contract Terms and conditions - Commercial Items FAR 52.222-26 Equal Opportunity. FAR 52.222-19 Child Labor - Cooperation with Authorities and Remedies FAR 52.222-21 Prohibition of Segregated Facilities FAR 52.222-50 Combating Trafficking in Persons. FAR 52.223-18 Encouraging Contractor Policy to Ban Text Messages While Driving FAR 52.223-13 Restrictions on Certain Foreign Purchases FAR 52-232-33 Payment by Electronic Funds Transfer - System for Award Management FAR 52-233-1 Disputes FAR 52-233-3 Protest After Award FAR 52.233-4 Applicable Law for Breach of Contract Claim FAR 52.247-34 FOB - Destination DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials DFARS 252.203-7002 Requirement to Inform Employees of Whistleblower Rights DFARS 252.204-7003 Control of Government Personnel Work Product DFARS 252.204-7004 Alternate A, System for Award Management DFARS 252.204-7006 Billing Instructions DFARS 252.211-7003 Item Unique Identification and Valuation DFARS 252.225-7001Buy American and Balance of Payments Program DFARS 252.225-7002 Qualifying Country Sources as Subcontractors DFARS 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports DFARS 252.232-7006 Wide Area WorkFlow Payment Instructions DFARS 252.232-7010 Levies on contract payments DFARS 252.247-7023 Transportation of Supplies by Sea FAR 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/ http://www.acquisition.gov/far/ (End of provision) FAR 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/ http://www.acquisition.gov/far/ (End of clause) 52.252-5 AUTHORIZED DEVIATIONS IN PROVISIONS (APR 1984) (a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause. (b) The use in this solicitation or contract of any DFARS (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of clause) 52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (APR 1984) (a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause. (b) The use in this solicitation or contract of any DFARS (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of clause) FAR 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (DEVIATION 2013-O0019) (Jan 2014) (a) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (a) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (b) (1) Notwithstanding the requirements of any other clause in this contract, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (b)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)). (ii) 52.219-8, Utilization of Small Business Concerns (Dec 2010) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) 52.222-17, Nondisplacement of Qualified Workers (Jan 2013) (E.O. 13495). Flow down required in accordance with paragraph (1) of FAR clause 52.222-17. (iv) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). (v) 52.222-35, Equal Opportunity for Veterans (Sep 2010) (38 U.S.C. 4212). (vi) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). (vii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (viii) 52.222-41, Service Contract Act of 1965, (Nov 2007), (41 U.S.C. 351, et seq.) (ix) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)). ___ Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)). (x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.). (xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services--Requirements (Feb 2009) (41 U.S.C. 351, et seq.) (xii) 52.222-54, Employment Eligibility Verification (Jul 2012). (xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (Mar 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xiv) 52.247-64, Preference for Privately-Owned U.S.- Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of Clause) AFFARS 5352.201-9101 Ombudsman As prescribed in 5301.9103, insert the following clause: OMBUDSMAN (APR 2014) (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, Mr. Gregory S. Oneal, AFICA/KM, 507 Symington Drive, Scott AFB IL 62225-5022, (618) 229-0267, fax (618) 256-6668, email: gregory.oneal@us.af.mil. Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/HQ AFICA/AFISRA/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer. Offers should be sent via e-mail, but may be sent in writing or by fax, to the Purchasing Agent, SrA Jeff N. Karingithi and Mr. Matt Sanders, no later than 2:00 P.M. (CDT) on 9/9/2014 (Friday, September 5th 2014) to 319 CONF/LGCA - 575 Tuskegee Airmen Blvd, Grand Forks, ND. 58205, ATTN: SrA Jeff N. Karingithi and Mr. Matt Sanders. For more information email Jeff.karingithi.1@us.af.mil or call at # 701-747-5280 and matt.sanders.1@us.af.mil or call at # 701-747-5281. Fax # 701-747-4215.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AMC/319CONS/FA4659-14-Q-0035/listing.html)
- Place of Performance
- Address: 319 Contracting Flight, 575 Tuskegee Airman BLVD, Bldg 418, Grand Forks, North Dakota, 58207, United States
- Zip Code: 58207
- Zip Code: 58207
- Record
- SN03480661-W 20140828/140826235051-76478d249b7d0fb1c898e8d41d6536b4 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |