SPECIAL NOTICE
38 -- Excavator
- Notice Date
- 8/18/2014
- Notice Type
- Special Notice
- NAICS
- 333120
— Construction Machinery Manufacturing
- Contracting Office
- RCO Grafenwoehr (PARC Europe, 409th CSB), UNIT 28130, APO, AE 09114
- ZIP Code
- 09114
- Solicitation Number
- W912PB14T3141
- Archive Date
- 8/18/2015
- Point of Contact
- William Maynard, 09641-83-8125
- E-Mail Address
-
RCO Grafenwoehr (PARC Europe, 409th CSB)
(william.r.maynard10.mil@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- EXCAVATOR TRK MTD EXCAVATOR Volvo EW140D or equivalent Description and minimum requirements: Engine Water-cooled 4-cylinder turbo diesel with air-cooled intercooler; exhaust gas recirculation and a particulate filter. Type: D4H Capacity min: 4 liters Power min: 102 KW Torque at 1600 r / min: max 609Nm Two-stage air filtration plus security element Emission standard min. Tier 4 i, no add Blue Vehicle dimensions and weights operating weight: 14.3 ton min counterweight: min 2.5 ton swing radius: max 2030 mm ground clearance: 350 mm min vehicle width: max 2540 mm Hydraulic system load-sensing axial piston pump with max. 247 l / min max operating pressure 360 bar with booster function independent gear pump for brake steering system management tool to adjust the pressure and flow for attachments from the cab automatic excavator brake, when activated, is the parking brake and oscillating lock activated and deactivated automatically thermostatically controlled fan electronic limit load control emergency lowering of the equipment filter element for hydraulic oil return feed forward and Leak oil Additional hydraulics slope hydraulic: swing bucket or grab bucket rotation function grab arm hydraulic: Open stopcocks on the bucket cylinder; grab bucket open/close buttons on joystick over spoon Hydraulic quick-change: control valve including pipes on the boom and mono arm. Hose rupture valve for arm cylinder Hammer scissor hydraulic including a pressure less return line via foot pedal proportional Electrical central electrical unit for controlling and monitoring all equipment functions emergency program for bridging over the electronics 24 volt system 80A alternator main switch for battery LED driving lights in accordance to Strassenverkehrsordnung LED work lights in the cabin roof LED headlights on the counterweight 2 pieces LED light on boom foldable flashing beacon protected electrical distribution box in the cabin Cabin cabin on viscous bearing with over roll protection two-phase air filtration air-suspension comfort seat, heat able and adjustable, seat belt adjustable steering column split windshield, tinted safety glass parallel working interval wipers LCD color monitor for monitoring the operating status and setting of the machine functions 4-stage mode selector automatic speed reset, idle and engine shut driving speed rotary switch over load warning protection Radio with Bluetooth, remote control via console rain roof sunblind front, middle and rear climate control with 14 vents LCD monitor for rear view camera Over carriage access for drivers over non-slip tread plate steel over carriage cover on the underside of steel wide-opening service doors with one key system automatic locking of the over carriage about inductive control in drive mode central lubricating point for boom and turntable electric refueling pump with automatic switch off central filter unit in the pump chamber oil and diesel filters from ground exchangeable electrical over carriage locking heavy counterweight min 2, 5 ton Slew system toothed ring gear maintenance-free hydrostatic actuator with planetary gear acts as a wear-free swivel brake swing damping system hydraulically released multi-disc brake as parking brake lathe Undercarriage three-stage hydrostatic all-wheel-drive system travel speed 30 km / h driving pedal controls the transport mode, the motor speed fully hydraulic dual-circuit braking system, wet disc brakes on front and rear axle pendulum angle of the steering axis + / - 9% maintenance-free cardan shafts Attachments hydraulic adjustable boom min 4.70 m ink. Pipe rupture valve mono boom arm: min 2.60 m tires 10:00 20 16PR Mitas spacer rings for tires radial support plate grab bracket both Sides lockable tool box on the undercarriage with tool set automatic engine shut down central lubrication hydraulic both sides proportional control via joystick Lehnhoff HS10 hydraulic with lifting hook R??dlinger-ditch cleaning bucket width 1800 mm with back blade and swing motor heated water separator and fuel filter Modification of existing equipments Motebert hydraulic hammer type 250 Planers MTS type BF450-15 Stump cutter Weber type BSF 36F AM Modify above described equipments with quick coupler Lehnhoff Type SW10 including hydraulic routing. The Contractor must inform himself on site before offer about required modification work. Guarantee line for the equipment described shall be 24 months Services on location (Hohenfels) 100 hours on location with lubricants 500 hours on location with lubricants 1000 hours on location with lubricants 1500 hours on location with lubricants 2000 hours on location with lubricants Briefing Conduct a one-day introduction to German language of the operating and maintenance personnel Delivery and handover of the vehicle by the manufacturer. Technical Documents Instructions 2 each (in English and German) Spare Parts List 2 each (in English and German) Maintenance Instructions 2 each (in English and German) Repair Manual T??V inspection and certification, OR EQUAL Delivery the equipment described must be new and operationaly. See attachments for further details of equipment.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/08cf520d431e1bc9504d9d58e91195cc)
- Record
- SN03469649-W 20140820/140819000107-08cf520d431e1bc9504d9d58e91195cc (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |