MODIFICATION
42 -- FIRE FIGHTING EQUIPMENT
- Notice Date
- 7/21/2014
- Notice Type
- Modification/Amendment
- Contracting Office
- CCMI-DPG BUILDING 5330, DUGWAY, UT 84022
- ZIP Code
- 84022
- Solicitation Number
- 0010559083
- Response Due
- 7/28/2014
- Archive Date
- 1/24/2015
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- CANCELLATION NOTICE:Bids are being solicited under solicitation number 0010559083. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation is issued as an invitation for bids (IFB), unless otherwise indicated herein.If your company can provide the product/services listed on the solicitation and comply with all of the solicitation instructions, please respond to this notice. To view the specifications, please go to www.FedBid.com and reference Buy No. 637042. GSA Schedule Bids Only: Sellers bidding on this opportunity MUST have the items requested on an existing GSA Schedule. The Schedule must either be in the Seller's name or the Seller must be able to document its ability to act as an agent of a partner's Schedule. Sellers must not bid more than their applicable contract ceiling price, excluding the FedBid Fee, for contract-specific items. If FedBid receives notice that, due to inclusion of the FedBid Fee, the Selected Bid's line item pricing is higher than the Selected Seller's applicable published government contract pricing, the FedBid Fee will be reduced to ensure the Selected Bid's line item pricing does not exceed the Selected Seller's applicable contract pricing. Sellers may offer Open Market items only in accordance with the approved Terms and Conditions of their respective GSA Schedule AND upon approval from the soliciting Contracting Officer. Information regarding GSA Schedules can be found at www.GSA.gov. This requirement is a [ Small Business ] set-aside and only qualified sellers may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-07-28 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be DUGWAY, UT 84022 The MICC Dugway Proving Ground requires the following items, Brand Name or Equal, to the following: LI 001: LTG4XTL Fire helmet with IZ4 ESS Goggles & Tracklite System. M-PACT Shell with SmartRidge design, High-heat thermoplastic outer shell, Comfortable Sure-Lock ratchet headband,Balanced 4-point nylon crown straps and crown pad, Nomex chinstrap with quick-release buckle and postmans slide fastener, Rip-stop Nomex ear/neck protector, Leather ratchet cover, Removable fire-resistant, absorbent cotton brow pad,Quick-Attach faceshield or goggle system, 12 comfort settings,Scotchlite reflective markings,Certified to NFPA 1971-2013 standard, Tracklite eight bright white leds, protected behind heat resistant glass. Trac light Bright blue light on the rear of the helmet,runtime of at least six continuous hours at a minimum brightness level of 50%. Vendor will be required to size department personnel at a minimum of 10 times over several days/weeks to accommodate are schedule. Vendor shall be within 100 miles of Dugway Proving Grounds. To allow for related service need for gear. If vendor is out of the 100 mile requirement then they will have to make arrangements to fit personal as required. This award will run for one year. Vendor will need to invoice per scheduled fitting., 30, EA; LI 002: Carbon Fire Flash Hood FABRIC: Both outer shell and lining to be a blend of Carbon/High Strength Aramid-approx.6.5 oz sq yd. 1 x 1 rib knit fabric - knit to allow approx. 200% stretch for maximum stretch and recovery. Calendared to minimize laundry shrinkage. STITCH TYPES AND SEAMS: All stitching conforms to Federal Standard 751 Specifications (FED-STD-751). Major seams to be flat seam assembled, stitch type 607. Elastic in face opening to be serged in with stitch type 504 and reinforced with bottom cover-stitch, stitch type 406. Binding to be applied with bottom cover-stitch, stitch type 406. THREAD: All seams to be sewn with 100% Nomex thread size Tex 40. CONSTRUCTION: Composed of two layers throughout. For a contoured fit the hood is to be seamed from top of face opening to back of head. Face opening is to be circular in shape and serged with x-heavy duty wide elastic around the perimeter. The elastic to be folded back and cover stitched. The face opening needs to stretch a full 16" for easy donning and a snug fit around face of SCBA mask. Face opening needs to be able to maintain original shape after repeated launderings. The bottom edge of hood to be bound with self-material bias binding. Gusset to be added at side seams to provide complete shoulder coverage and smoother drape. SIZE: One size hood fits all. LABELING AND USER INFORMATION: Each hood to be clearly labeled to identify material contents, NFPA acceptance, UL Classification, Date of Manufacture, and Care Instructions. A complete users information guide to be included with each hood. MEETS OR EXCEEDS INDUSTRY STANDARDS: UL classified to meet or exceed NFPA 1971-Current Edition; Compliant with CAL-OSHA Sections 3406 and 3410(d) and OSHA Rule 29 CFR, Part 1910, 269. Compliant with NFPA 70E-Current Edition and meets performance specifications of ASTM-F-1506. ARC Rating: 23.3 # Hazard / Risk Category: Vendor will be required to size department personnel at a minimum of 10 times over several days/weeks to accommodate are schedule. Vendor shall be within 100 miles of Dugway Proving Grounds. To allow for related service need for gear. If vendor is out of the 100 mile requirement then they will have to make arrangements to fit personal as required. This award will run for one year. Vendor will need to invoice per scheduled fitting., 30, EA; LI 003: Globe GXT-75 G-Xtreme coat, 7.5 oz gold PBI, complete with the following; -W /Flashlight Holder on right chest. -W/Removable Velcro names on the back bottom of turnout coat for last name identification name provided at later date once contract is awarded. -Caldura SL thermal linear -Crosstech black moisture barrier -Dragonhide cuff reinforcement -2x3.5x7 radio pocket on left chest with antenna notch on left side with MIC strap. -NYC style lime/yellow triple trim -Embroidered American Flag on right sleeve -Dragonhide cuffs -(2) Snap tabs on hem -Drag rescue device -Separating liner -Coat closure shall be made of Velcro and zipper assembly. Vendor will be required to size department personnel at a minimum of 10 times over several days/weeks to accommodate are schedule. Vendor shall be within 100 miles of Dugway Proving Grounds. To allow for related service need for gear. If vendor is out of the 100 mile requirement then they will have to make arrangements to fit personal as requested. This award will run for one year. Vendor will need to invoice per scheduled fitting., 30, EA; LI 004: Globe GXT-75 G-Xtreme pant, 7.5 oz Gold PBI complete with the following: -Caldura Sl thermal Liner -Crosstech Blackmoisture barrier -Dragonhide knee patches over padded knees -Dragonhide cuff reinforcement -3. lime/yellow triple trim around lower legs -seperating liner -G-Xtreme padded removable suspenders. Vendor will be required to size department personnel at a minimum of 10 times over several days/weeks to accommodate are schedule. Vendor shall be within 100 miles of Dugway Proving Grounds. To allow for related service need for gear. If vendor is out of the 100 mile requirement then they will have to make arrangements to fit personal as required at their expense.. This award will run for one year. Vendor will need to invoice per scheduled fitting., 30, EA; LI 005: SHELBY FLEX-TUFF SERIES GLOVES Model 5292 Specifications SHELL MATERIALS: Glove forchettes, thumb shield and index finger (trigger finger) of Flexor grain cowhide, 3.0 oz. weight. A highly specialized grain leather. Palm and back Shelby Koala Gold/Black split cowhide, 3.50 3.75 oz. weight. SHELL FEATURES: Snag resistant 3M eflective nail guards and Shelby/Crosstech labels. Arashield grip enhancer double stitched into base of Trigger Finger. Flex-Points with knitted Kevlar strategically placed below nail guards at first knuckle on fingers and thumb. G-BLOC wrist blocking system that prevents unnecessary glove creep/shift during intensive usage, Thumb back added Flexor grain cowhide shield for additional protection. All shell features to be double stitched with Kevlar thread. THERMAL LINING: Tech Fleece 6.0 oz/yd, 185 g/m Kevlar and lensing non-woven (stitchbonded) fleece with 8.0 gsm web adhesive laminated to back of the fabric. PROTECTIVE BARRIER: Gore Crosstech Film Technology Insert laminated to thermal lining. This one piece system shall mirror the pre-curved outer shell. This liner and barrier system to be individually graded and produced in as many sizes as glove sizes. PROTECTIVE BARRIER FEATURES: All fingers and thumb (topside) to have attachment tabs for permanent liner/barrier attachment. Additional thermal protection layers on fingers and thumb backs. G-BLOC wrist blocking applied to the glove liner/barrier system at precisely the same areas as the outer shell. WRISTLET: Nomex of 10.5 oz. per yard, double ply, 3.length. Wristlet to be sewn to liner and barrier system and again sewn separately to the leather shell. Model 5292 is gauntlet style and does not have wristlet. WRIST PULL: Black cowhide 2. wide tapering to 1 nd 4 in length. At the end of leather pull to have carabineer loop extending beyond wristlet. THERMAL SPACER: Added thermal protection layer to extend from glove back seam to approximately down from finger crotches. Additional thermal protection layers applied to fingers and thumb backs. Vendor will be required to size department personnel at a minimum of 10 times over several days/weeks to accommodate are schedule. Vendor shall be within 100 miles of Dugway Proving Grounds. To allow for related service need for gear. If vendor is out of the 100 mile requirement then they will have to make arrangements to fit personal as required at their expense. This award will run for one year. Vendor will need to invoice per scheduled fitting., 30, EA; LI 006: GS-07F-0043L 14 in pull on Supreme Bunker boots. # 1. FLAME RESISTANT, WATERPROOF HEAVY DUTY LEATHER Specially softened tumbled leather in high flex areas to move with you. 2. CROSSTECH FOOTWEAR FABRIC A full-height bootie liner made from a package of Cambrelle, 300g insulation, and CROSSTECH moisture barrier. 3M SCOTCHLITE REFLECTIVE MATERIAL Flame-resistant fluorescent and reflective material for added visibility. 4. HEELPORT INTERNAL FIT SYSTEM, 5. MOLDED HEEL COUNTER Individually molded to fit each size perfectly. 6. COMPOSITE SHANK Lighter than steel, 7. COMPOSITE PUNCTURE PROTECTION.Exceeds NFPA standards for safety. 8. VIBRAM CONTOURED CUP OUTSOLE Molded outsole wraps onto the leather upper for athletic shoe performance. Flame, abrasion, oil, acid and slip-resistant compound engineered. 9. SLIP RESISTANT TREAD Siping thin slits cut into flat areas across the sole open up when flexed to provide additional traction on water and ice. Self-cleaning lugs and omni-direction tread pattern designed for superior performance in all terrains and when working on ladders. 10. PULL-STRAPS Flexible NOMEX webbing pull-straps reinforced with leather. 11. NOMEX/KEVLAR PROTECTIVE SHIELD. 12. 3D MOLDED AND PADDED SHIN GUARD. 13. COMPOSITE SAFETY TOE CAP. 14. TOE BUMPER Made from the same rugged compound as the outsole for abrasion resistance when crawling. 15. 3D MOLDED REMOVABLE FOOTBED. 16. 3D COMPOSITE LASTING BOARD Lasted to boot uppers with a built-in flex zone in the forefoot and a torsionally stable heel. Works together with the footbed to conform to your foots shape. 17. ATHLETIC FOOTWEAR CONSTRUCTION 2-part cross-linking adhesive bonds outsoles and the upper. Without stiff welts and ribbed mid-soles,CUSTOM FIT SYSTEM A second, thicker removable footbed is provided for a snugger fit or when wearing with lighter socks. Vendor will be required to size department personnel at a minimum of 10 times over several days/weeks to accommodate are schedule. Vendor shall be within 100 miles of Dugway Proving Grounds. To allow for related service need for gear. If vendor is out of the 100 mile requirement then they will have to make arrangements to fit personal as required. This award will run for one year. Vendor will need to invoice per scheduled fitting., 30, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Dugway Proving Ground intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Dugway Proving Ground is taking this action in an effort to improve both seller access and awareness of requests and the agency's ability to gather multiple, completed, real-time bids.All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Sellers that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Sellers that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Sellers may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should Sellers require additional clarification, contact FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Contact ClientServices@FedBid.com or call 1-877-9FEDBID to address any questions. New equipment ONLY, NO remanufactured products FOB Destination CONUS (CONtinental U.S.) Shipments to be made per scheduled fitting. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. U.S. Army Dugway Proving Ground operates on a four (4) day work week, Monday through Thursday, from 7:00 A.M. to 5:30 P.M. (local time) except for Federal Holidays. Deliveries will be accepted on regular scheduled work days between 7:00 A.M. and 4:30 P.M. (local time). The following Federal Holidays are observed: Access to U.S. Army Dugway Proving Ground (DPG) requires that Contractor employees voluntarily submit personal data (e.g., name, social security number, etc.) when applying for a DPG Identification Card or temporary access pass. This information is routinely used by DPG Law Enforcement and Security personnel to conduct drivers license and criminal history / background checks. Adverse information revealed by such checks (e.g., outstanding criminal warrants, criminal history indicating a potential risk to DPG Installation security, or similar negative information indicating a potential security and/or Law Enforcement risk to DPG), may result in a denial of access and/or reentry to U.S. Army Dugway Proving Ground. Delays caused by any adverse employee information do not constitute a basis for claim by the Contractor. It is the Contractor'?s responsibility to assure all personnel scheduled to work on the installation have acceptable backgrounds. Manufacturer or supplier must ensure that all OSHA standards applicable to that which is being purchased are complied with. U.S. Army Dugway Proving Ground is located in a remote area. The main gate is approximately 90 miles southwest of Salt Lake City, Utah. Contractors may be required to travel up to 150 miles one way from Salt Lake City to reach some work sites. Contractors with valid U.S. government contracts will be allowed to hire non U.S. citizens to work at or visit U.S. Army Dugway Proving Ground (DPG) during performance of the contract. Contractor'?s shall adhere to the following process. A list of foreign national employees shall be provided to the DPG Counterintelligence, Law Enforcement, and Security Offices at least five (5) working days prior to arrival on post. A copy of the list shall also be submitted to the Contracting Officer or an appointed Contracting Officer'?s Representative (COR). The list will contain name, nationality, green card and social security number, date of birth, drivers license number and state where issued. The Contractor shall also list the date(s) foreign nationals will be on post. If a sensitive test or visit is scheduled during the dates provided, the Counterintelligence Office will inform the Contractor whether the work/visit may take place. Employees will not be allowed on Post until verification process is complete. Once verification has been received, the Counterintelligence Office is responsible to provide the Protocol Office the following information for badge preparation: Name, Company and Point-of-Contact. The Contracting Officer or COR will be responsible to pick-up the badges and holders, issue them to the visitor and return them at the end of the visit. The Offeror shall comply with the following FAR/DFARS clauses that the contracting officer has indicated as being incorporated in this solicitation by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: 52.204-7, System for Award Management; 52.204-13, System for Award Management; 252.204-7003 Control of Government Personnel Work Product; 252.204-7004 Alternate A, System for Award Management; 252.211-7003 Item Identification and Valuation; 252.232-7010 Levies on Contract Payments; **OTHER CLAUSES AS DETERMINED APPLICABLE BY THE CONTRACTING OFFICER FOR THE SPECIFIC REQUIREMENT** Questions concerning this buy must be submitted at least *2* days prior to the established closing date to reasonably expect a response from the Government. Those questions not received within the proscribed date may not be considered.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/8683e798b6577ac7ed974f594f4a249e)
- Place of Performance
- Address: DUGWAY, UT 84022
- Zip Code: 84022
- Zip Code: 84022
- Record
- SN03432089-W 20140723/140721235036-8683e798b6577ac7ed974f594f4a249e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |