SOLICITATION NOTICE
10 -- FORWARD ROTOR
- Notice Date
- 7/15/2014
- Notice Type
- Presolicitation
- NAICS
- 332994
— Small Arms, Ordnance, and Ordnance Accessories Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43218-3990, United States
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7L414R0170
- Archive Date
- 9/13/2014
- Point of Contact
- Michele Beasley, Phone: 6146927572
- E-Mail Address
-
michele.beasley@dla.mil
(michele.beasley@dla.mil)
- Small Business Set-Aside
- N/A
- Description
- NSN# 1005-01-044-6074 / 26 EA w/100% OPTION (52 EA) OPEN/CLOSE: 7/30/14 - 8/29/14 ***************************************************** ROTOR, FORWARD THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS (22 C.F.R. 120-30) AND THE ARMS EXPORT CONTROL ACT (22 U.S.C.A. 2778-2799). ANY MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS REQUIRED TO REGISTER WITH THE DIRECTORATE OF DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF STATE. DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED PRIOR TO AWARD. ADDITIONAL EXPORT RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE TO SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER INELIGIBLE FOR AWARD NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION. This item contains a phosphate coating requirement IAW MIL-STD-171 and MIL-DTL-16232. In lieu of the required submittal of a preproduction phosphate procedure the following is now required: The contractor responsible for the actual coating procedure must be certified by the Performance Review Institute (PRI) to the Nadcap standard for chemical processes. Verification of this certification may be required and must be supplied upon request of the Contracting Officer. THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATTLE CREEK, MI 49037-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25." DLAD PROVISION 52.211-9009 IS APPLICABLE TO THIS SOLICITATION, THEREFORE SURPLUS MATERIAL WILL NOT BE CONSIDERED. IF PRESENT IN THE SOLICITATION, PROVISION 52.211-9003 AND CLAUSE 52.211-9000 ARE NOT APPLICABLE. GENERAL DYNAMICS-OTS, INC. DBA 05606 P/N 205F335 IAW REFERENCE DRAWING NR 05606 205F335 REVISION NR W DTD 04/23/1986 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 05606 205F335 REVISION NR AP DTD 10/04/2001 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 05606 A10345 REVISION NR A DTD 01/06/1983 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 05606 304A835 REVISION NR D DTD 03/15/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 05606 119A2115 REVISION NR R DTD 08/08/2006 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 05606 891C700 REVISION NR C DTD 06/28/1976 PART PIECE NUMBER: IAW REFERENCE SPEC NR MIL-PRF-46010H REVISION NR H DTD 10/02/2006 PART PIECE NUMBER: IAW REFERENCE SPEC NR MIL-DTL-16232G NOT 1 REVISION NR G DTD 10/03/2006 PART PIECE NUMBER: IAW REFERENCE UNK QPL-3150-34 NOT 1 REVISION NR 34 DTD 10/03/2006 PART PIECE NUMBER: IAW REFERENCE UNK QPL-16173-84 NOT 1 REVISION NR 84 DTD 10/03/2006 PART PIECE NUMBER: IAW REFERENCE UNK QPL-46010-18 NOT 1 REVISION NR 18 DTD 10/03/2006 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 98752 200415485 REVISION NR C DTD 09/05/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 05606 304A843 REVISION NR V DTD 03/21/2012 PART PIECE NUMBER: IAW REFERENCE QAP 16236 SQAP010446074 REVISION NR A DTD 07/10/2010 PART PIECE NUMBER: IAW REFERENCE QAP 16236 PHOS-OUTLINE-16232 REVISION NR A DTD 10/15/2010 PART PIECE NUMBER: IAW REFERENCE QAP 16236 PHOS-OUTLINE-DRY REVISION NR A DTD 10/15/2010 PART PIECE NUMBER: IAW REFERENCE QAP 16236 PHOS-QAR-CHECK REVISION NR A DTD 10/15/2010 PART PIECE NUMBER: IAW REFERENCE QAP 16236 PHOS-DL-MANG REVISION NR DTD 11/05/2010 PART PIECE NUMBER:
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPE7L414R0170/listing.html)
- Record
- SN03426243-W 20140717/140716022344-7164f5fbeeb126eba5d605ea99f153f5 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |