MODIFICATION
F -- R1-IMAT Nez Perce-Clearwater NF Elk Winter Range Brush Cutting - Amendment 1
- Notice Date
- 7/7/2014
- Notice Type
- Modification/Amendment
- NAICS
- 115310
— Support Activities for Forestry
- Contracting Office
- Department of Agriculture, Forest Service, R-1 IMAT: Clearwater; Idaho Panhandle; Kootenai; and Nez Perce NF's, 3815 Schreiber Way, Coeur d'Alene, Idaho, 83815-8363, United States
- ZIP Code
- 83815-8363
- Solicitation Number
- AG-02RC-S-14-0122
- Archive Date
- 8/29/2014
- Point of Contact
- Deb Gerfen, Phone: 208-983-4001, Maple Stuivenga, Phone: 2089834002
- E-Mail Address
-
dgerfen@fs.fed.us, mstuivenga@fs.fed.us
(dgerfen@fs.fed.us, mstuivenga@fs.fed.us)
- Small Business Set-Aside
- Total Small Business
- Description
- Unit detail sheet - revised Revised map Revised schedule of Items - return as part of quotation SF30 Amendment to Solicitation - 1 copy must be signed and returned with quotation. Amendment 1 changes the units and acreage, map and unit description sheet of the solicitation. posted as separate documents. Scope of Work This contract requires slashing of deciduous shrubs for fuels reduction, wildlife habitat improvement, and conifer release, as well as related work on designated units or contract items in compliance with terms, specifications, and provisions listed or referenced herein. This includes furnishing labor, equipment, supervision, transportation, operating supplies, and incidentals, except those items listed as Government-furnished property. Location The work is located on the Lochsa Ranger District of the Nez Perce-Clearwater National Forest. The work sites, access to the area, methods of work, sizes of units, and other information pertinent to each item are listed on Detailed Unit Information Charts and maps in the attachments. Description of Work Area The boundaries of each unit have not been designated on the ground. The boundaries are generally located along recognizable topographic (for example, ridgelines) or vegetation (for example, transition from shrub field to timber stand) features. The contractor will be expected to be aware of the approximate unit boundaries within which to conduct the required work. However, the Contractor will not be required to physically mark (for example, with flagging), the unit boundaries. The attached Detail Unit Maps and Aerial Maps show the location of each unit. Contractors will be provided additional large scale maps to assist in location of unit boundaries on the ground. The size (acres) of each unit has been determined using GIS mapping. The Detailed Unit Information Chart indicates the percentage of each unit to be cut, based on aerial photograph interpretation. The contractor is only expected to cut shrubs on the percentage of each unit indicated. For example, Unit 6 contains 85 acres, and 90% of the area is estimated to contain shrubs to be cut; therefore, the Contractor would be required to cut shrubs on approximately 76 acres within the unit. Project Access Access to the general project area consists of high standard paved and gravel surface Forest roads that are passable by a standard two-wheel-drive pickup truck equipped for mountain driving during the normal operating season (approximately April 1 to November 1). Access may be seasonally limited (by snow) outside of the normal operating season. Motorized Equipment. Use of motorized equipment other than hand-held implements such as power saws or brush cutters by the Contractor will not be permitted off designated roads and trails without approval of the Contracting Officer.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USDA/FS/281/AG-02RC-S-14-0122/listing.html)
- Place of Performance
- Address: Nez Perce-Clearwater NF, 104 Airport Road, Grangeville, Idaho, 83530, United States
- Zip Code: 83530
- Zip Code: 83530
- Record
- SN03416291-W 20140709/140708021656-ff4bd74958b13b56209b2bbfb90387cb (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |