MODIFICATION
20 -- PERFORMANCE TESTING OF MOISTURE CURED URETHANES & MOISTURE CURED URETHANE TEST MATRIX
- Notice Date
- 6/30/2014
- Notice Type
- Modification/Amendment
- NAICS
- 541380
— Testing Laboratories
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC), 2401 Hawkins Point Road, Building 31, Mail Stop 26, Baltimore, Maryland, 21226-5000, United States
- ZIP Code
- 21226-5000
- Solicitation Number
- HSCG85-14-Q-P45M51
- Archive Date
- 7/26/2014
- Point of Contact
- Jermond M. Williamson, Phone: 510-637-5936, Kristen J. Thomas, Phone: 5106375976
- E-Mail Address
-
Jermond.M.Williamson@uscg.mil, kristen.j.thomas@uscg.mil
(Jermond.M.Williamson@uscg.mil, kristen.j.thomas@uscg.mil)
- Small Business Set-Aside
- N/A
- Description
- Questions posed from vendor(s): 1. Will the Coast Guard supply the testing lab with all of the necessary coatings, or do we have to obtain them from the various suppliers? Will you be supplying the MIL-DTL-2441 Formula 50 coating? If not, do you have contact information for a supplier of this coating?" Answer: Offerer to obtain coatings. MIL-DTL-2441 Formula 50 should be "MIL-DTL-24441, formula 150", this is the standard "Mare Island Epoxy" primer, available from a variety of sources, including, but not limited to: http://www.milspeccoating.com/MIL-DTL-24441-Formula-150-Type-III-and-Type-IV-p/24441-f150.htm http://www.milspeccoating.com/contact (877) 628-9472 8:30a-6:00p PT (weekdays) MilSpecCoating.com (A division of) STIC-ADHESIVE Products Co. 3950 Medford Street Los Angeles, CA 90063 http://protective.sherwin-williams.com/detail.jsp?A=sku-26469%3Aproduct-6929 1-800-524-5979 https://protective.sherwin-williams.com/contact/ Contact Page Simco Coatings Inc. 211 Gunther Ln. Belle Chasse, LA 70037 Office: 504.393.9455 Toll-Free: 866.95.SIMCO Fax: 504.433.1406 sales@simcocoatings.com http://www.simcocoatings.com/mildtlformula.html ANY "formula" (150, 151, 152, etc - they differ only in color) is acceptable. Additional sources may be found via the Qualified Products Database maintained by the Defense Logistics Agency, http://qpldocs.dla.mil/search/parts.aspx?qpl=1926¶m=MIL-DTL-24441D&type=262144 2. "It is very difficult for a lab to obtain a near-white (SP10) blast, especially when starting with mill scale bearing steel panels. Will you accept a white metal (SP5) blast?" Answer: While SP10 is more typical of surfaces encountered in service, for this COMPARITIVE test, SP5 is acceptable. 3. "Do you have a source for the specified blasting abrasives listed in the test matrix (MiL-A-22262 grit, and CID-A-A-59316 Type I and IV)?" Answer: The Qualified Products Database maintained by the Defense Logistics Agency has a number of sources, see http://qpldocs.dla.mil/search/parts.aspx?qpl=1944 and chose a media that suits your equipment.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/USCGELC/HSCG85-14-Q-P45M51/listing.html)
- Place of Performance
- Address: VENDOR FACILITY, United States
- Record
- SN03410269-W 20140702/140701023933-b77b953caf99e002c16650d191dac317 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |