SOLICITATION NOTICE
W -- Mobile Office Workspace - Design Drawing
- Notice Date
- 6/26/2014
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 332311
— Prefabricated Metal Building and Component Manufacturing
- Contracting Office
- Department of the Air Force, Pacific Air Forces, 36 CONS - Andersen, Unit 14040, Andersen AFB, 96543-4040
- ZIP Code
- 96543-4040
- Solicitation Number
- F2ATGH4150H001
- Archive Date
- 7/16/2014
- Point of Contact
- Alicia Ferris, Phone: 671-366-6620, Andrea C. Lay, Phone: 6713664947
- E-Mail Address
-
alicia.ferris@us.af.mil, andrea.lay.1@us.af.mil
(alicia.ferris@us.af.mil, andrea.lay.1@us.af.mil)
- Small Business Set-Aside
- HUBZone
- Description
- Design drawing for mobile office workspace. 26 June 2014 36th Contracting Squadron Andresen AFB, Guam Unit 14040 Building 22026 APO AP 96543-4040 NAICS Code: 332311 - Portable buildings Subject: Mobile Office Workspace Solicitation Number: F2ATGH4150H001 Closing Response Date: 01 July 2014 at 1600 (4pm) GST Points of Contact: 1st Lt Alicia Ferris (671) 366-6620 alicia.ferris@us.af.mil TSgt Andrea Lay (671) 366-4947 andrea.lay.1@us.af.mil Contract Line Items: 0001 - Mobile Office Workspace Unit (32'x90') plus Mobilization/Demobilization CLIN 000101: Base (months 1 to 12) CLIN 000102: Option 1 (months 13 to 18) CLIN 000103: Option 2 (months 19 to 24) Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are requested and a written solicitation will not be issued. Solicitation number F2ATGH4150H001 is issued as a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-69. This acquisition is reserved exclusively for Reaction Co, Guam, IAW FAR 6.302-5(b)(5) - Authorized or Required by Statute - Sole source awards under the HUBZone Act of 1967. The applicable NAICS code is NAICS code is 332311 (Prefabricated Metal Building and Component Manufacturing) and the small business size standard for this NAICS code is 500 employees. 0001 - Mobile Office Workspace Unit (32'x90') plus Mobilization/Demobilization CLIN 000101: Base (months 1 to 12) CLIN 000102: Option 1 (months 13 to 18) CLIN 000103: Option 2 (months 19 to 24) STATEMENT OF WORK FOR MOBILE OFFICE WORKSPACE SCOPE OF WORK: The contractor shall provide all personnel, labor, materials, transportation, and equipment to provide one (1) 32' x 90' mobile office workspaces and associated equipment. SUMMARY: Date In-Place: 15 July 2014 Date of Demobilization: 14 July 2015 Total Days: 365 01 qty of 32' x 90 (or similar) **See attached Design Drawing Location: Andersen AFB, Guam GENERAL REQUIREMENTS: Each unit must contain o Overhead lighting (with emergency lighting) o Adequate air condition system o Power receptacles o LAN cabling with wall jacks o Fire extinguisher o Central power breaker system, labeled to indicate lights/wall receptacles Vendor will provide a securing mechanism that prevents damage to surrounding areas, and keeps the containers in place during sudden inclement weather or high wind conditions (typhoons). Vendor must follow all safety and traffic procedures while operating on base. Vendors performing work on flight line must perform FOD checks prior to entering/exiting the flight line. Maintenance required will be at responsibility of vendor and serviced throughout terms of lease. Frequency: Vendor may make multiple pre-coordinated deliveries CONTACT INFORMATION: POC: 1Lt Alicia Ferris Contact Number: 366-6620 ALTERNATE POC: TSgt Andrea Lay Contact Number: 366-4947 DETAILS: 1. Title: Mobile Office Workspace 1.1 Location: Guam [see above] 1.1.1 Andersen AFB, Main Base 1.1.2 Andersen AFB, Andersen North Field 1.1.3 As Required 1.2 Period of Performance: [see above] 1.2.1 Delivery Date: [see above] 2. References: None 3. Requirements: 3.1 Provide new/like new ISO certified standard modular workspace units. Location for delivery of Modular workspace units are specified in 1.1, 1.1.1., 1.1.2., and 1.1.3. Approx. Sizes: Single Unit of at least 40-feet length by 8-feet wide by 8-foot-6-inches high (40'Lx8'Wx8'-6"H); Double unit of at least 40-feet length by 16-feet wide by 8-foot-6inches high (40'Lx16'Wx8'-6'H); Small unit of at least 20-feet length by 8-feet wide by 8-foot-6inches high (20'Lx8'Wx8'-6'H); and Half size unit of at least 12-feet length by 8-feet wide by 8-foot-6inches high (12'Lx8'Wx8'-6'H); Each Modular workspace unit shall be equipped as follows: 3.1.1 Each modular workspace unit shall have insulation on all ceilings and vertical interior walls. Insulation shall be rated as a minimum of R-30 rating insulation thickness. 3.1.1.1 Insulation shall be faced/laminated with a vinyl covering for all exposed surfaces within the interior of the modular workspace unit. 3.1.1.2 Insulation utilized shall be in accordance with NAIMA202-96® (Rev. 2000) Standard for Flexible Fiber Glass Insulation laminated for use in metal buildings or equivalent. 3.1.2 Prewired each modular workspace unit and install with 110 and 220 volt electrical outlets wall mounted. 3.1.2.1 Installed 110/220 wiring gauges shall be in accordance with American Wire Gauge (AWG) standards for support of at minimum 100 Amp service. 3.1.2.2 The contractor shall provide a central power breaker system in each modular workspace that allows the modular unit's to be secured if necessary. The power panel will also be properly labeled indicating the breaker switch controlling lights and wall receptacles. 3.1.2.3. Prewired each modular workspace unit to accept external commercial three phase electrical power or generator. 3.1.3 Overhead lighting sufficient to provide proper illumination throughout the modular unit. 3.1.4 Provide new two (2) each; dual air conditioning units capable of operating within the temperatures ranges compatible with paragraph 3.1.2.1. 3.1.4.1 Minimum capacity for each air conditioning unit: 10,000 BTU, 250 3.1.5 Each modular workspace unit shall have (1) refrigerator with 110 volt electrical outlets 3.1.6 Each modular workspace unit will have electrical outlets every six feet with a minimum of two per wall 3.1.7 Each modular workspace unit shall have wiring for twenty four (24) LAN cables with wall jacks (CAT 5 or better) every 6 feet. Modular units will also be equipped to accept external LAN cable runs. 3.1.8 Each modular workspace unit will have a shelf capable of holding several electrical appliances ( router/printer/fax/etc), with data ports and electrical outlets in close proximity. 3.1.9 Each modular workspace shall have a locking mechanism on each entry door 3.1.10 Each modular workspace unit shall have one fire extinguisher 3.1.11 Each door will have an emergency exit signs for each door that illuminates if power failure occurs 3.1.12 The contractor shall provide two sets of keys for each entry door. Keys should be labeled/numbered indicating which modular workspace entry door key secures. If more than one modular unit is delivered, then each key set will also be labeled indicating the modular unit. The contractor shall provide a securing mechanism (concrete footings) that prevents damage to surrounding areas, and keeps the containers in place during sudden inclement weather or high wind conditions. 3.1.13 Contractor shall provide typhoon tie downs on each side of the modular workspace. 3.1.14 Contractor shall provide wooden decks/steps for each modular workspace unit. 3.1.15 Contractor must have capability of constructing a portable partition that separates the modular workspace allowing for two work areas. 3.2 The contractor shall be responsible for the delivery, mobilization and arrangement of the modular workspace units to location specified in 1.1. configure/locate each modular workspace unit as directed. The contractor shall be responsible for the pickup, shipment and demobilization of the modular workspace units upon the end of the contract; to include all furniture provided and in accordance with all local laws and regulations. 3.2.1 The contractor shall clean up all debris and discard all material associate with the mobilization and demobilization of the modular workspace units. 4. Notes: 4.1 Contractor personnel shall abide by all security requirements of the base installation command. 4.2 In the event of an incident that involves damage to contractor or government property, or personnel, the contractor shall immediately: 4.2.1 Inform the contracting officer within 24 hours after the occurrence. 4.2.2 The contractor will provide details of the accident in writing to the contracting officer and the command safety office. 4.3 A competent, English-speaking foreman or superintendent, with the authority to act on behalf of the Contractor, must be present at the delivery site at all times when work is going on. 4.4 Contractor shall maintain unescorted base access for all its personnel performing installation. A government official will act as escort for all controlled areas were installation occurs 4.5 Alternate proposals may be considered. The contractor may propose readily available modular units that sufficiently meet the subscribed needs of the Government; however, no exceptions shall be made for paragraph 1.1 through 1.2. 5. Government Furnished Material: 5.1 None 6. Security 6.1 All personnel employed by the contractor in the performance of this PWS and any representative of the contractor entering the Government installation in the performance of this PWS, shall abide by all security regulations of the installation and in order to register at the Pass Office for a base pass. Citizens from certain countries are currently banned from entering U.S. installations; Security Forces maintains a list of these banned countries. This includes individual contractor employees; therefore any contractor employee who is a citizen of one of these countries will not be allowed to access the installation. The list of excluded countries is subject to change without modification or amendment of the PWS or contract. 6.1 The contractor must have all employees badged at the Andersen AFB Pass and Registration Section to work on this contract. All personnel will undergo a background check (note: there is a minimum 72 hours required for processing checks). Any persons denied entry during the background check, will not be permitted on the base for any reason. All contractor personnel who are cleared for entry will receive a contractor's badge and register all vehicles in accordance with current guidelines. Individuals will be escorted to the simulator facilities by 736 SFS Commando Warrior personnel once they clear the Pass and Registration Section for maintenance work.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/PAF/36CONS/F2ATGH4150H001/listing.html)
- Place of Performance
- Address: Andersen AFB, Guam, Andersen AFB, Guam, 96543, United States
- Zip Code: 96543
- Zip Code: 96543
- Record
- SN03406845-W 20140628/140626234418-e7b38c16f1a0e9d9de9113d8d3f5be0e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |