SOURCES SOUGHT
66 -- RF Absorber
- Notice Date
- 6/18/2014
- Notice Type
- Sources Sought
- NAICS
- 334515
— Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
- Contracting Office
- MICC - White Sands Missile Range, Directorate of Contracting, Bldg 143, 2nd Floor, Crozier Street, White Sands Missile Range, NM 88002-5201
- ZIP Code
- 88002-5201
- Solicitation Number
- W9124Q-14-T-0046
- Response Due
- 6/26/2014
- Archive Date
- 8/17/2014
- Point of Contact
- Bernadette Quevedo, 575-678-2981
- E-Mail Address
-
MICC - White Sands Missile Range
(bernadette.t.quevedo.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- This is only a sources sought announcement and is not an intent to procure. A solicitation is not available at this time and any requests for a solicitation will not receive a response. The U.S. Army White Sands Missile Range (WSMR) Electromagnetic Radiation Effects (EMRE) facility is conducting market research to determine the capability of businesses to provide the required RF absorber. The RF Absorber material lines the anechoic chamber and is essential for the chamber to provide the RF environment necessary for radiated emissions testing of equipment to MIL-STD 461F and MIL-STD 464F. The absorber material must be the same standard design to prevent costly redesign of the chamber. It is necessary for new RF Absorber to be obtained so that the required RF quiet environment can be achieved during testing to MIL-STD464A/C and MIL-STD461E/F radiated emissions requirements for all current and future force systems. Technical Requirements 1.Standard Absorber Sections; 152 each Condition new Must meet or exceed model EMC-24PCL Technical Capabilities Must match dimensions of model EMC-24PCL 2.Standard Absorber, 45 degree mitre Sections; 128 each Condition new Must meet or exceed model EMC-24PCL-A1 Technical Capabilities Must match dimensions of model EMC-24PCL-A1 3.Standard Absorber, Double 45 degree mitre Sections; 24 each Condition new Must meet or exceed model EMC-24PCL-A3 Technical Capabilities Must match dimensions of model EMC-24PCL-A3 4.Spray Adhesive Adhesive capable of being sprayed onto ceiling and walls Must be enough to cover 800 square feet 5.Adhesive application system Must provide a system for adhesive application (i.e. a sprayer) Interested vendors shall provide datasheets of existing products for review and comparison with datasheets for RF absorber mentioned above. It is expected that RF absorber presented for consideration is already in production and can present actual data of measured performance of the RF absorber. All responses to this sources sought are limited to twelve pages and must include the following additional information: Business Name:__________________________ Business Size:___________________________ Point of Contact: _________________________ Phone Number: _________________________ Address: ______________________________ Cage Code: _____________________________ Interested sources shall submit all replies by email to bernadette.t.quevedo.civ@mail.mil no later than 1300 MST on 26 June 2014. Acknowledgement of receipt will not be made. Any responses received after 26 June 2014 will not be considered. THE GOVERNMENT DOES NOT INTEND TO AWARD A CONTRACT ON THE BASIS OF THIS SOURCES SOUGHT OR TO OTHERWISE PAY FOR THE INFORMATION SOLICITED. This request for information is for planning purposes only and shall not be considered as an Invitation for Bid (IFB), Request for Quotation (RFQ), or Request for Proposal (RFP), or as an obligation on the part of the Government to acquire any products or services. Your responses to this sources sought will be treated as information only. No entitlement to payment of direct or indirect costs or charges by the Government will arise as a result of contractor submission of responses to this sources sought or Government use of such information. The Government reserves the right to reject, in whole or part, any contractor input resulting from this sources sought. The information resulting from this sources sought may be included in one or more RFP's, which may be released via the FEDBIZOPS portal. This Sources Sought Synopsis is issued for maximizing competition. Should anything in the requirement be construed as limiting competition, please feel free to contact the MICC Special Competition Advocate (SCA) at dean.m.carsello.civ@mail.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/15872d5e070d462379819f3978c1f8d4)
- Place of Performance
- Address: MICC - White Sands Missile Range Directorate of Contracting, Bldg 143, 2nd Floor, Crozier Street White Sands Missile Range NM
- Zip Code: 88002-5201
- Zip Code: 88002-5201
- Record
- SN03399439-W 20140620/140619022332-15872d5e070d462379819f3978c1f8d4 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |