FBODaily.com | FedBizOpps: MOD | 59 | Cable and Electrical Supplies

FBO DAILY - FEDBIZOPPS ISSUE OF JUNE 15, 2014 FBO #4586
MODIFICATION

59 -- Cable and Electrical Supplies

Notice Date: 6/13/2014
Notice Type: Modification/Amendment
Contracting Office: 6501 E. 11 Mile Rd., Warren, MI 48397
ZIP Code: 48397
Solicitation Number: W56HZV-14-T-A295
Response Due: 6/16/2014
Archive Date: 12/13/2014
Point of Contact: Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
E-Mail Address: Clientservices@fedbid.com;
Small Business Set-Aside: Total Small Business
Description: AMENDMENT NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W56HZV-14-T-A295 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-74. The associated North American Industrial Classification System (NAICS) code for this procurement is 335999 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2014-06-16 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Fort Bliss, TX 79906 The WRN - Warren requires the following items, Brand Name or Equal, to the following: LI 001: Junction Block-Cooper Bussmann, Product# JB3816-2 or equal Minimum requirements: Color Black, size 2.12 inch (L) x.75 inch (W), 250A Max current rating, steel contact material, thermoplastic housing material, Stud terminal type., 26, EA; LI 002: Junction Block-Cooper Bussmann, Product# JB3816-3 or equal Minimum requirements: Color Red, size 2.12 inch (L) x.75 inch (W), 250A Max current rating, steel contact material, thermoplastic housing material, Stud terminal type., 26, EA; LI 003: D10-BANDING BACKSHELL 90 DEG MIL; Connect ICC Product # M85049/90-9W03 or equal Minimum requirements: Amphenol PCD Backshell,and Lock, Adapter, 90 Deg, SL, OD Cad, Size 09, 30, EA; LI 004: N Female Crimp Connector-Belden 9913 & LMR-400 Belden,Product# 9913/LMR-400 or equal Minimum requirements: High quality N Female Crimp Connector, 50 Ohm Connector, 50, EA; LI 005: CAT5e Crossover Coupler, RJ45 Female to Female- White Abergetty Product# AD125-W or equal Minimum requirements: Minimum requirements: rated CAT 5e; shielded, color is white, female to female RJ45 coupler., 102, EA; LI 006: COUPLER MODULAR 8POS-8POS Conec, Product #17-10009 or equal Minimum requirements: COUPLER MODULAR 8POS-8POS; SHEILDED; RJ45; CAT5E, 35, EA; LI 007: COUPLER MODULAR 8POS-8POS W/ SHELL Conec, Product #17-101604 or equal Minimum requirements: COUPLER MODULAR 8POS-8POS; SHEILDED; RJ45; CAT5E, 35, EA; LI 008: Cat5e, 350 MHz, Shielded, 24AWG, 1000ft, Green Ethernet Cords, Product # 057-470/S/GR or equal Minimum requirements: Cat5e, 350 MHz, Shielded, 24AWG, 2, EA; LI 009: Cat5e, 350 MHz, Shielded, 24AWG, 1000ft, Red Ethernet Cords, Product # 057-473/S/RD or equal Minimum requirements: Cat5e, 350 MHz, Shielded, 24AWG., 2, EA; LI 010: Ring Terminal, Brown Brazed 2 AWG, (Pk=100) 3M, Product #MC2-14RX or equal Minimum requirements: Ring Terminal, Standard terminal type, non-insulated, brown color coded. 2 AWG wire range, ? inches stud size, 347 degrees F max temp, 600v max voltage, 1.60 inches overall length, brazed seam, copper connection material, crimp connection type, 2, EA; LI 011: Circuit Breaker, 1Pole, 20A, BL, 120V, 10kA Siemens, Product # B120 or equal Minimum requirements: Bolt On Circuit Breaker, 20A max, standard circuit breaker type, lug terminal connection, 14 AEG(cu), 12 AEG (A1) Min. wire size, 10 AWG (Cr, Al) Max Wire size, 3.57 inches long, 1 inch wide, and 3 inches depth, 12, EA; LI 012: Battery Terminal spreader cleaning pliers Proto,Product # J319 or equal Minimum requirements: Battery Terminal spreader cleaning pliers; 7-1/2?; cushion handle, 4, EA; LI 013: Ring Terminal, Bare, 2 AWG, (PK = 10) Quick Cable, Product #4920-828F or equal Minimum requirements: Ring Terminal, crimp terminal type, non-insulated, bare color code, 2 AWG wire range, 3/8 inches stud size, 221 degrees F. Max temp, 600V max voltage, copper connection material, crimp connection type., 20, EA; LI 014: Female Crimp L-COM, Product # ANF-1406 or equal Minimum requirements: Type N Female Crimp for 400-series cable, 60, EA; LI 015: Type N Male Crimp for RG8, 400-Series Cable L-COM Mfr. # ANM-1406 or equal Minimum requirements: Type N Male Crimp for RG8, 400-series cable, 60, EA; LI 016: Right Angle Male Crimp L-COM Mfr. # ANM-1416 or equal Minimum requirements: Type N Male crimp right angle for RG8, 400-series cable, Nickel plated body for corrosion resistance, Gold plated center contact, 60, EA; LI 017: Coaxial Adapter, Type-N Female / BNC Male L-COM, Product # AXA-NFBM or equal Minimum requirements: Type N female to BNC male coaxial adapter, Nickel plated body for corrosion resistance, Gold plated center contact., 35, EA; LI 018: Coaxial Adapter, BNC Female / Type N-Male L-COM, Product #AXA-NMBF or equal Minimum requirements: Type N male to BNC female coaxial adapter, Nickel plated body for corrosion resistance, Gold plated center contact, 85, EA; LI 019: Coaxial Adapter, BNC Male / TNC Female Right Angle L-COM Mfr. # BA3002 or equal Minimum requirements: BC plug to TNC jack 90 degree adapter, Nickel plated body for corrosion resistance, Gold plated center contact, Male to female gender combination, and Right Angle construction, 150, EA; LI 020: Connector TNC M RA RG58 crimp L-COM, Product # BAC525 or equal Minimum requirements: TNC Male right angle connector for crimp on RG58C/U cable, Nickel plated body for corrosion resistance, Gold plated center contact, crimp style, 175, EA; LI 021: Coaxial Adapter, N-Female / BNC FemaleL-COM, product # AXA-NFBF or equal Minimum requirements: Type N female to BNC female coaxial adapter, Nickel plated body for corrosion resistance, Gold plated center contact, 30, EA; LI 022: Cat 5E, 24AWG, 4 pair, 1KFT L-COM, Product # TFDL2104 or equal Minimum requirements: Color: light gray, Category 5E shielded twisted pair cabling, EIA568 color-coded, rated to 100 Mhz for high performance Ethernet networks, LSZH Low Smoke Zero Halogen Jacket, 1, EA; LI 023: Pin High Density Male Connector Marertek, Product # DP26HD or equal Minimum requirements: 26 Pin High Density Male Connector, 18, EA; LI 024: Heat Shrink Tubing/Sleeves 3M Electronic Specialty, Product #FP-301 or equal Minimum requirements: size ? inches by 100 ft BLK, heat shrinkable tubing, color Black, minimum shrink temperature +100C shrink ratio 2:1, inside diameter ? inches, polyoetin material, 5, EA; LI 025: RF/Coaxial Connectors Amphenol Connex, Product #112563 or equal Minimum requirements: RF Connectors/coaxial connectors BNC ST crimp Plug, cable type: LMR400 B7810A, nickel body finish, brass contact material, gold contact plating, crimp termination, cable ? crimp termination style., 100, EA; LI 026: Multi-Paired Cables 24AWG 4PR SHIELD Belden Wire & Cable, Product #1624R 0051000 or equal Minimum requirements: Color: Green, length 1000ft spool, CAT 5E, Jacket Color: Green, polyolefin insulation material, 300 V MAX rating, 4-pairs, 24 AWG, shielded, copper conductor material, 8 conductors, and used on network cables, 1, EA; LI 027: Multi-Paired Cables 24AWG 4PR UNSHLD Belden Wire & Cable, Product #1700A 002U1000 or equal Minimum requirements: Color: Red, length 1000ft spool, CAT 5e type, solid strand, unshielded, 24 AWG, 4-pairs, polyolefin insulation material, 8 conductors, copper conductor material, outside diameter 5.13mm, 1, EA; LI 028: Multi-Conductor Cables 20AWG 2C SHIELD Belden Wire & Cable, Product #8412 010500 Minimum requirements: Color: black, length 500ft spool, shielded, 600V Max rating, 20 AWG, polyolefin insulation material, 2 conductors, stranded (26x34), outside diameter 6.65mm, 1, EA; LI 029: Modular/Ethernet Connector, Male Phoenix Contact, Product #1656725 or equal Minimum requirements: CAT 5E, RJ45, 8 number of positions/contacts, 1 port, shielded, Male, cable mounting style. 1.75A current rating, gold contact plating, polycarbonate housing material, color gray, copper alloy contact material,, 100, EA; LI 030: Metal Film Resistors Low Noise - Through Hole 1/4W 1.0K 0.1% IRC / TT electronics, Product # RC55LF-D-1K-B-B or equal Minimum requirements: 1 kOhms resistance, 250mw (1/4w) power rating,.1% tolerance, 25 PPM/C temperature coefficient, axial termination style, case diameter 2.5mm, case length 7.2mm, lead diameter.6mm, 60, EA; LI 031: Metal Film Resistors - Thru Hole 1/2watt 18.2Kohms 1% 100ppm Vishay / Dale Mfr. # RN65D1822FB14 or equal Minimum requirements: 18.2 kOhms resistance, 250mw (1/4w) power rating,.1% tolerance, 100 PPM/C temperature coefficient, axial termination style, case diameter 4.57mm, case length 14.27mm, lead diameter.64mm, 60, EA; LI 032: RF/COAXIAL, PLUG, R/A 50 OHM CRIMP/SOLDER AMPHENOL RF, Product # 31-6002-RFX or equal Minimum requirements: right angle plug body style, cable connector mounting, solder coaxial termination, TNC coaxial connector type,, brass contact material, gold contact plating, 11GHz Max frequency, 50 ohm impedance, RG cable type Belden 9913 and LMR-400, 100, EA; LI 033: RF/COAXIAL, PLUG, R/A 50 OHM CRIMP/SOLDER;AMPHENOL CONNEX, Product #122416 or equal Minimum requirements: right angle plug body style, cable connector mounting, crimp/solder coaxial termination, TNC coaxial connector type, brass contact material, gold contact plating, 11GHz Max frequency, 50 ohm impedance, RG cable type Belden 9913 and 9914, 100, EA; LI 034: Circuit Breaker Magnetic Circuit Protectors 3Pole 175A Airpax / Sensata, Product #LELHPK111-1-52-175.-01-V or equal Minimum requirements: Circuit Breaker Magnetic Circuit Protectors 3 Poles 175A current rating, 5, EA; LI 035: Non-Shorting Dust Cap for BNC Male With 2.8 Inch Chain Pasternack Product # PE6013 or equal Minimum requirements: Male connector gender, non-shorting dust cap with chain, BNC connector series, 24, EA; LI 036: Non-Shorting Dust Cap for N Male With 2.7 Inch Chain Pasternack Product # PE6016 or equal Minimum requirements: Male connector gender, non-shorting dust cap with chain, N connector series, 24, EA; LI 037: Non-Shorting Dust Cap for SMA Male With 2.7 Inch Chain Pasternack, Product # PE6019 or equal Minimum requirements: Male connector gender, non-shorting dust cap with chain, SMA connector series, 32, EA; LI 038: Non-Shorting Dust Cap for SMA Male With 2.7 Inch Chain Pasternack, Product # PE6023 or equal Minimum requirements: Male connector gender, non-shorting dust cap with chain, TNC connector series, 24, EA; LI 039: N Female to BNC Male Right Angle Adapter Pasternack, Product # PE9566 or equal Minimum requirements: Standard polarity, 50 Ohm impedance, brass body material, nickel body plating, 50, EA; LI 040: Screw Cover J-BoxHoffman Enclosures, Product #ASE4X4X4 or equal Minimum requirements: Height 4 inches, Width 4 inches, Depth 4 inches, Steel, material spec 16/14/12 gauge, Color ANSI 61: Gray, NEMA 1, IP30 enclosure, wall mounting, flat - screw on cover type, knockout location: 4 sides and 4 ends, 45, EA; LI 041: Screw Cover J-BoxHoffman Enclosures, Product #ASE6X6X4 Minimum requirements: Height 6 inches, Width 6 inches, Depth 4 inches, Steel, material spec 16/14/12 gauge, Color ANSI 61: Gray, NEMA 1, IP30 enclosure, wall mounting, flat - screw on cover type, knockout location: 6 sides and 6 ends, 35, EA; LI 042: Bird Technologies - Attenuator, 30dB 25W Tessco, Product #25-A-MFN-30 or equal Minimum requirements: N Male to N Female connectors, DC-4GHz frequency range, 25 watts Max power, 30db nominal attenuation, bi-directional RF coaxial attenuators, 4, EA; LI 043: Weather-Resistant Neoprene Foam, Soft, 1/8" Thick, 36" Wide McMaster-Carr, Product # 8570K11 or equal Minimum requirements: Extra-soft (2-5psi), 1/8 inches thickness, 36 inches wide foam, color black, 90 ft long, 4, EA; LI 044: Weather-Resistant Neoprene Foam, Soft, 3/16" Thick, 36" Wide McMaster-Carr, Product # 8570K21 or equal Minimum requirements: soft (5-9psi), 3/16 inches thickness, 36 inches wide foam, color black, 75 ft long, 4, EA; LI 045: Weather-Resistant Neoprene Foam, Soft, 1/4" Thick, 36" Wide McMaster-Carr, Product # 8570K22 or equal Minimum requirements: soft (5-9psi), 1/4 inches thickness, 36 inches wide foam, color black, 75 ft long, 4, EA; LI 046: Rubber bumper McMaster-Carr, Product # 8884T25 or equal Minimum requirements: 1 inch diameter, 1 inch height, 7/32 inch hole diameter, 3/8 inch counterbore diameter. Made from abrasion-resistant Buna-N rubber with metal washer embedded at the base for added strength, color black Medium-hard with a 50A durometer, 35, EA; LI 047: Round Rubber Bumper, 1-1/32" Diameter, 5/8" High, w/o Washer, McMaster-Carr, Product # 9540K34 or equal Minimum requirements: Also known as recessed rubber bumper, 1 1/32 inch diameter, 5/8 inch height, 3/16 inch hole diameter, 9/16 counterbore diameter, hard, 35, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, WRN - Warren intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. WRN - Warren is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: Clause 52.204-7, 52.211-17, 52.222-1, 52.229-3, 52.232-11, 52.246-2, 52.246-16, 52.247-34, 252.204-7006, 252.232-7003, 252.232-7010, 252.243-7001 and 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Appicable to Defense Acquisitions of Commercial Items, paragraph (b) with the following clauses: 252.203-7000, 252.225-7001 and 252.247-7023 Alt III. Information regarding the Army Contracting Command-Warren Ombudsperson is located at the website http://contracting.tacom.army.mil/acqinfo/ombudsperson.htm. [End of Clause] (a) All references in the contract to the submission of written documentation shall mean electronic submission. All electronic submissions shall be in the formats and media described in the website: http://contracting.tacom.army.mil/ebidnotice.htm (b) This shall include all written unclassified communications between the Government and the Contractor except contract awards and contract modifications which shall be posted on the internet. Return receipt shall be used if a commercial application is available. Classified information shall be handled in full accordance with the appropriate security requirements. (c) In order to be contractually binding, all Government communications requiring a Contracting Officer signature must be sent from the Contracting Officer's e-mail address. The Contractor shall designate the personnel with signature authority who can contractually bind the contractor. All binding contractor communication shall be sent from this contractor e-mail address(es). (d) Upon award, the Contractor shall provide the Contracting Officer with a list of e-mail addresses for all administrative and technical personnel assigned to this contract. (e) Unless exempted by the Procuring Contracting Officer in writing, all unclassified written communication after contract award shall be transmitted electronically. [End of Clause] This provision serves as an addendum that modifies paragraph (h) of FAR 52.212-1, entitled INSTRUCTIONS TO OFFERORS?COMMERCIAL ITEMS. Paragraph (h) is modified to say that you must offer to provide the total quantity of the items in this solicitation. ONLY ONE AWARD WILL BE MADE AS A RESULT OF THIS SOLICITATION. OFFERS SUBMITTED FOR LESS THAN THE TOTAL QUANTITIES OF ALL THE ITEMS IN THIS SOLICITATION WILL NOT BE CONSIDERED FOR AWARD [End of Clause] OFFEROR REPRESENTATIONS AND CERTIFICATIONS?COMMERCIAL ITEMS (JUN 2005) (a) Definitions. As used in this clause? (1) ?Foreign person? means any person other than a United States person as defined in Section 16(2) of the Export Administration Act of 1979 (50 U.S.C. App. Sec. 2415). (2) ?United States? means the 50 States, the District of Columbia, outlying areas, and the outer Continental Shelf as defined in 43 U.S.C. 1331. (3) ?United States person? is defined in Section 16(2) of the Export Administration Act of 1979 and means any United States resident or national (other than an individual resident outside the United States and employed by other than a United States person), any domestic concern (including any permanent domestic establishment of any foreign concern), and any foreign subsidiary or affiliate (including any permanent foreign establishment) of any domestic concern which is controlled in fact by such domestic concern, as determined under regulations of the President. (b) Certification. By submitting this offer, the Offeror, if a foreign person, company or entity, certifies that it? (1) Does not comply with the Secondary Arab Boycott of Israel; and (2) Is not taking or knowingly agreeing to take any action, with respect to the Secondary Boycott of Israel by Arab countries, which 50 U.S.C. App. Sec. 2407(a) prohibits a United States person from taking. (c) Representation of Extent of Transportation by Sea. (This representation does not apply to solicitations for the direct purchase of ocean transportation services). (1) The Offeror shall indicate by checking the appropriate blank in paragraph (c)(2) of this provision whether transportation of supplies by sea is anticipated under the resultant contract. The term ?supplies? is defined in the Transportation of Supplies by Sea clause of this solicitation. (2) Representation. The Offeror represents that it? ___________Does anticipate that supplies will be transported by sea in the performance of any contract or subcontract resulting from this solicitation. ___________Does not anticipate that supplies will be transported by sea in the performance of any contract or subcontract resulting from this solicitation. (3) Any contract resulting from this solicitation will include the Transportation of Supplies by Sea clause. If the Offeror represents that it will not use ocean transportation, the resulting contract will also include the Defense Federal Acquisition Regulation Supplement clause at 252.247-7024, Notification of Transportation of Supplies by Sea. (End of provision) (a) The Government often employs contractors as system administrators to operate and maintain Government computer systems. These systems include local area networks, web sites, databases, other electronic records, e-mail accounts, other electronic data transfer mechanisms and computer software. The employees of these contracted system administrators sign nondisclosure agreements obligating them not to reveal information contained in files, documents, computers or systems that they administer. However, unless such information is protected in some way, contracted system administrators do have the ability to access such information. (b) Potential contractors as well as any other parties are thus advised to take steps needed to prevent access by contracted system administrators to information submitted electronically to the Government. Absent such steps, it is assumed that contracted system administrators are permitted the capability to access the data. The access will be limited to that which is necessary for the contract system administrator to perform its duties for the Government. The access shall be subject to the condition that third party information is not to be revealed by the contracted system administrator. [End of Provision] The Contracting Officer is the only person authorized to approve additions or changes in any of the requirements under any contract, resulting from this solicitation, notwithstanding any provisions contained elsewhere in this contract, the said authority remains solely in the Contracting Officer. In the event that the contractor effects any change at the direction of any person other than the Contracting Officer, such change shall be solely at the risk of the contractor. (See General Provision, entitled: ?Notification of Changes,? FAR 52.243-7 or paragraph (c) of FAR 52.212-4). [End of Clause] Inspection and acceptance of supplies offered under this purchase order shall take place as specified here. Inspection: DESTINATION. Acceptance: DESTINATION. [End of Clause] This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): http://farsite.hill.af.mil This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://farsite.hill.af.mil [End of Clause] (a) Definitions. As used in this clause? ?Manufactured end product? means any end product in Federal Supply Classes (FSC) 1000-9999, except? (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. ?Place of manufacture? means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. (b) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly? (1) [ ] In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) [ ] Outside the United States. (a) We will award a contract to the offeror that: 1. submits the lowest evaluated offer, and 2. submits a bid or proposal that meets all the material requirements of this solicitation, and 3. meets all the responsibility criteria at FAR 9.104. (b) To make sure that you meet the responsibility criteria at FAR 9.104 we may: 1. arrange a visit to your plant and perform a preaward survey; 2. ask you to provide financial, technical, production, or managerial background information. (c) If you don't provide us with the data we ask for within 7 days from the date you receive our request, or if you refuse to have us visit your facility, we may determine you nonresponsible. (d) If we visit your facility, please make sure that you have current certified financial statements and other data relevant to your bid or proposal available for our team to review. (End of Provision) (a) In accordance with sections 8124 and 8125 of Division A of the Consolidated Appropriations Act, 2012, (Pub. L. 112-74) none of the funds made available by that Act may be used to enter into a contract with any corporation that- (1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government. (2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless the agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government. (b) The Offeror represents that - (1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, (2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months. 52.211-6 BRAND NAME OR EQUAL (AUG 1999) (a) If an item in this solicitation is identified as ?brand name or equal,? the purchase description reflects the characteristics and level of quality that will satisfy the Government's needs. The salient physical, functional, or performance characteristics that ?equal? products must meet are specified in the solicitation. (b) To be considered for award, offers of ?equal? products, including ?equal? products of the brand name manufacturer, must--(1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by--(i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications. (c) The Contracting Officer will evaluate ?equal? products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an ?equal? product, the offeror shall provide the brand name productreferenced in the solicitation. (End of provision) (a) This clause does not apply to the unrestricted portion of a partial set-aside. (b) Applicability. This clause applies only to-- (1) Contracts that have been set aside or reserved for small business concerns or 8(a) concerns; (2) Part or parts of a multiple-award contract that have been set aside for small business concerns or 8(a) concerns; and (3) Orders set aside for small business or 8(a) concerns under multiple-award contracts as described in 8.405-5 and 16.505(b)(2)(i)(F). (c) By submission of an offer and execution of a contract, the Offeror/Contractor agrees that in performance of the contract in the case of a contract for-- (1) Services (except construction). At least 50 percent of the cost of contract performance incurred for personnel shall be expended for employees of the concern. (2) Supplies (other than procurement from a nonmanufacturer of such supplies). The concern shall perform work for at least 50 percent of the cost of manufacturing the supplies, not including the cost of materials. (3) General construction. The concern will perform at least 15 percent of the cost of the contract, not including the cost of materials, with its own employees. (4) Construction by special trade contractors. The concern will perform at least 25 percent of the cost of the contract, not including the cost of materials, with its own employees.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/notices/acfb225f4aa6686c390f98b184298576)
Place of Performance: Address: Fort Bliss, TX 79906; Zip Code: 79906-5000
Record: SN03394941-W 20140615/140613234736-acfb225f4aa6686c390f98b184298576 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

59 -- Cable and Electrical Supplies