FBODaily.com | FedBizOpps: PRESOL | 84 | CE Clothing Lease - Attach #1 Performce Work Statement - Attach #2 Bid Schedule

FBO DAILY - FEDBIZOPPS ISSUE OF JUNE 07, 2014 FBO #4578
SOLICITATION NOTICE

84 -- CE Clothing Lease - Attach #1 Performce Work Statement - Attach #2 Bid Schedule

Notice Date: 6/5/2014
Notice Type: Combined Synopsis/Solicitation
NAICS: 315210 — Cut and Sew Apparel Contractors
Contracting Office: Department of the Air Force, Air Force Space Command, 50 CONTRACTING SQUADRON, 210 Falcon Parkway STE 2116, Schriever AFB, Colorado, 80912-2116, United States
ZIP Code: 80912-2116
Solicitation Number: FA2550-14-T-2000
Archive Date: 6/24/2014
Point of Contact: Jacob B Lacefield, Phone: 7195673277, Bryan J. Pemberton, Phone: 7195677332
E-Mail Address: jacob.lacefield@us.af.mil, bryan.pemberton@us.af.mil
(jacob.lacefield@us.af.mil, bryan.pemberton@us.af.mil)
Small Business Set-Aside: N/A
Description: Bid Schedule, CE Clothing Lease Performance Work Statement (PWS), CE Clothing Lease dated 11 March 2014 General Information Document Type: Combined Synopsis / Solicitation Solicitation Number: FA2550-14-T-2000 Classification Code: 8415 NAICS Code: 315210- Cut and Sew Apparel Contractor Contracting Office Address Department of the Air Force, Air Force Space Command, 50 CONS/LGCB, 210 Falcon Parkway, STE 2116, Schriever AFB, CO 80912-2116 Description: (i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. (ii) This solicitation is issued as a Request for Quote (RFQ) against solicitation number FA2550-14-T-2000 for a commercial items acquisition for rental and cleaning of arc flash flame resistant rated clothing. (iii) This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-74 effective 30 May 2014. (iv) The North American Classification System (NAICS) Number is (315210) Cut and Sew Apparel Contractor, SBA Size Standard is 500 employees. The proposed acquisition will be for solicited for Full and Open Competition. (v) The proposed acquisition consists of the following Contract Line Items Numbers (CLINs): See Attachment #2 (Bid Schedule) (vi) Description of requirements for the items to be acquired. The contractor shall furnish all labor, parts materials, equipment, and transportation necessary to deliver the below mentioned requirements. See Attachment #1, Performance Work Statement 11 March 2014 See Attachment #2, Bid Schedule &emsp; (vii) The Government will perform an inspection and the acceptance at Schriever AFB upon delivery. FOB point shall be Destination. All FOB destination charges must be included in quoted prices. Delivery Location: 50 CES 500 O'Malley Ave. Ste 19 Schriever AFB, CO 80912-2106 Delivery Date: 15 Days ADC (viii) ADDENDUM 52.212-1 I. GENERAL INSTRUCTIONS: A. These instructions provide general guidance for preparing quotes, as well as specific instructions on the format and content of the quote. Throughout this section, the term "offeror" includes subcontractors, teammates and/or joint venture partners. The offeror's quote must include all data and information requested, and must be submitted in accordance with these instructions. Any offeror who submits an incomplete package may be considered non-responsive, and therefore ineligible for award. The offeror shall be compliant with the requirements as stated in the Request for Quote (RFQ) and shall describe how the offer will satisfy the requirements stated in the PWS. This is a continuation of the solicitation provision FAR 52.212-1. B. Offerors must understand that current Federal and Defense Regulations require the use of the System for Award Management (SAM) and Wide-Area Work Flow (WAWF) Invoicing System. A vendor must be registered in these systems prior to award of the contract otherwise successful offeror may be considered non-responsive if the attainment of these registrations delays award of the contract. C. All required clause fill-ins and pricing information must be received or the offeror will be excluded from any further action on this acquisition. One (1) copy of the full package must be received by the closing date of the solicitation. D. Send only unclassified written quotes (electronic is acceptable). E. To assure timely and equitable evaluation of quotes, offerors must follow the instructions contained herein. Offerors are required to meet all solicitation requirements, including terms and conditions and representations and certifications. Failure to meet a requirement may result in an offer being ineligible for award. Offerors must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale. F. The quote response shall consist of a copy of two (2) separate parts; Part I - Price Quote and Part II - Technical Quote. G. Information. Your proposal shall reflect the following information on the address label: (1) Address indicated in subparagraph (I) below (2) Solicitation number: FA2550-14-T-2000 (3) The legend "TO BE DELIVERED UNOPENED TO ATTN: 50 CONS/LGCB" H. Submit one (1) copy of your quote in accordance with this Quote Preparation Instructions, to arrive at the office specified in subparagraph (I) below as follows: (1) PART I - Price Quote (2) PART II - Technical Quote I. Delivery Options and Addresses: (1)Mailing Instructions: PART I (Price Quote) and PART II (Technical Quote) must be delivered to: Jacob Lacefield (Contracting Officer) 50 CONS/LGCB 210 Falcon Parkway Suite 2116 Schriever AFB, CO 80912-2116 Phone: (719) 567-3277 (2) Hand Delivery Instructions: Due to Schriever Air Force Base mail security processes, the Contracting Officer cannot guarantee that mailed quotes will be received by the quote deadline. Hand delivered quotes will be accepted until the proposal deadline and arrangements can be made with the Contracting Officer to pick up the quotes at the Schriever AFB Visitor's Center. (3) Electronic versions can be emailed to: jacob.lacefield@us.af.mil or bryan.pemberton@us.af.mil. Offeror must request verification of receipt. J. Documents submitted in response to this RFQ must be fully responsive to and consistent with the following: (1) Requirements of the RFQ (CLINs, PWS) to include all applicable Government standards and regulations. (2) The technical quote shall not exceed 10 pages. Pages exceeding the page limitations will be removed from the quote and will not be read or evaluated. (3) Formatting shall be as follows: (a) A page is defined as one face of a sheet of paper containing information. (b) The proposals will be 8 1/2" x 11" paper except for fold-outs used for charts, tables, or diagrams, which may not exceed 11" x 17". (c) Type size shall not be less than 12 font. (d) Elaborate formats, bindings or color presentations are not desired or required. (e) The entire quote may also be delivered on Compact Discs (CD) or electronically via email. All electronic data must be formatted for Microsoft Office 2010 and virus free. If files are compressed, they must be "self-extracting-archives" (no software needed to decompress files). If files contain links, the links must be intact and maintained through all revisions. Spreadsheets should be easily tractable. All of the files submitted shall be read-only. Include notes to add clarity and understanding of formulas/entries. K. Site Visit. N/A II. SPECIFIC QUOTE INSTRUCTIONS: A. PART I - PRICE QUOTE (1) The offeror must submit an overall fully loaded rate per uniform via firm-fixed price. (2) Complete the Bid Schedule. In doing so, the offeror agrees to the contract terms and conditions as written in the SOLICITATION along with the attachments. (3) The offeror shall complete all necessary fill-ins and certifications required by this solicitation and only submit those pages. Ensure compliance with the on-line representations and certifications (ORCA) requirements in SAM. (https://www.sam.gov/portal/public/SAM/) B. PART II - TECHNICAL (1) Offerors must submit their technical approach to meeting the Performance of Work Statement (PWS). This should entail management approach to meeting the requirements of the PWS. The technical portion will be graded on an acceptable/unacceptable basis. (2) Offerors are cautioned to submit sufficient information to ensure a proper technical evaluation. The technical quote shall not exceed 10 pages. (End Provision) (ix) CLAUSES INCORPORATED BY REFERENCE 52.203-5 Covenant Against Contingent Fees APR 1984 52.203-6 Restrictions On Subcontractor Sales To The Government SEP 2006 52.203-7 Anti-Kickback Procedures OCT 2010 52.203-17 Contractor Employee Whistleblower Rights and Requirement To Inform Employees of Whistleblower Rights SEP 2013 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards JUL 2013 52.207-4 Economic Purchase Quantity-Supplies AUG 1987 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations--Representation MAY 2011 52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, or Proposed for Debarment AUG 2013 52.212-1 Instructions to Offerors--Commercial Items JUL 2013 52.212-4 Contract Terms and Conditions--Commercial Items SEP 2013 52.215-23 Limitations on Pass-Through Charges OCT 2009 52.216-27 Single or Multiple Awards OCT 1995 52.217-5 Evaluation Of Options JUL 1990 52.222-3 Convict Labor JUN 2003 52.222-19 Child Labor -- Cooperation with Authorities and Remedies JAN 2014 52.222-21 Prohibition Of Segregated Facilities FEB 1999 52.222-37 Employment Reports on Veterans SEP 2010 52.223-6 Drug-Free Workplace MAY 2001 52.223-18 Encouraging Contractor Policies To Ban Text Messaging While Driving AUG 2011 52.225-1 Buy American Act--Supplies FEB 2009 52.225-13 Restrictions on Certain Foreign Purchases JUN 2008 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-- Representation and Certifications. DEC 2012 52.232-1 Payments APR 1984 52.232-8 Discounts For Prompt Payment FEB 2002 52.232-11 Extras APR 1984 52.232-18 Availability Of Funds APR 1984 52.232-23 Assignment Of Claims JAN 1986 52.232-33 Payment by Electronic Funds Transfer--System for Award Management JUL 2013 52.232-37 Multiple Payment Arrangements MAY 1999 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.233-1 Disputes JUL 2002 52.233-3 Protest After Award AUG 1996 52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 52.243-1 Changes--Fixed Price AUG 1987 52.244-6 Subcontracts for Commercial Items DEC 2013 52.246-1 Contractor Inspection Requirements APR 1984 52.246-16 Responsibility For Supplies APR 1984 252.203-7000 Requirements Relating to Compensation of Former DoD Officials SEP 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD Officials NOV 2011 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7006 Billing Instructions OCT 2005 252.204-7012 Safeguarding of unclassified controlled technical information NOV 2013 252.209-7993 (Dev) Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law-Fiscal Year 2014 Appropriations (Deviation) FEB 2014 252.216-7006 Ordering MAY 2011 252.225-7002 Qualifying Country Sources As Subcontractors DEC 2012 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports JUN 2012 252.232-7006 (Dev) Wide Area WorkFlow Payment Instructions JAN 2013 252.232-7007 Limitation Of Government's Obligation MAY 2006 252.235-7004 Protection of Human Subjects JUL 2009 252.246-7003 Notification of Potential Safety Issues JUN 2013 (x) CLAUSES INCORPORATED BY FULL TEXT 52.211-16 VARIATION IN QUANTITY (APR 1984) (a) A variation in the quantity of any item called for by this contract will not be accepted unless the variation has been caused by conditions of loading, shipping, or packing, or allowances in manufacturing processes, and then only to the extent, if any, specified in paragraph (b) below. (b) The permissible variation shall be limited to: 1 item increase 1 item decrease This increase or decrease shall apply to the weekly delivery. (End of clause) 52.212-2 EVALUATION--COMMERCIAL ITEMS (JAN 1999) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: BASIS FOR CONTRACT AWARD: The Lowest Price Technically Acceptable (LPTA) source selection process will be used. Offeror's technical proposal will be evaluated on an acceptable/unacceptable basis. Only the lowest priced offer will be evaluated for technical acceptability, if found to be technically acceptable no further evaluations will be conducted. In addition, the Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. By submission of its offer, the offeror agrees to all solicitation requirements. This includes the terms and conditions, representations and certifications, technical requirements, and funds in the solicitation and all attachments. Failure to meet a requirement may result in an offer being determined non-responsive and thereby excluded from any further consideration. Offerors must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale. The evaluation process shall proceed as follows: A. PRICE QUOTE (1) Offerors will be evaluated on their entire contract price inclusive of options as indicated in paragraph (2) of this provision. (2) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). B. TECHNICAL (1) Offerors must submit with their proposal their technical approach for meeting the requirements of the Performance Work Statement (PWS). This should entail management approach to meeting the requirements of the PWS. The technical portion will be graded on an acceptable/unacceptable basis. (2) Offerors are cautioned to submit sufficient information to ensure a proper technical evaluation. (3) Communication conducted to resolve minor or clerical errors will not constitute discussions and the contracting officer reserves the right to award a contract without the opportunity for quote revisions. The Government intends to award a contract without discussions with respective offerors. The Government, however, reserves the right to conduct discussions if deemed in its best interest. (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of provision) 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS-COMMERCIAL ITEMS (DEVIATION 2013-O0019) (JAN 2014) (a) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (a) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records-Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (b) (1) Notwithstanding the requirements of any other clauses of this contract, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (b) (1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (41 U.S.C. 3509). (ii) 52.219-8, Utilization of Small Business Concerns (Dec 2010) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) 52.222-17, Nondisplacement of Qualified Workers (JAN 2013) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17. (iv) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). (v) 52.222-35, Equal Opportunity for Veterans (Sep 2010) (38 U.S.C. 4212). (vi) 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793). (vii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (viii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C.Chapter 67). (ix) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)). Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)). (x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (Nov 2007) (41 U.S.C. Chapter 67). (xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services-Requirements (Feb 2009) (41 U.S.C. Chapter 67). (xii) 52.222-54, Employment Eligibility Verification (E.O. 12989) (JUL 2012). (xiii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note). (xiv) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) 42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of clause) 52.216-18 ORDERING. (OCT 1995) (a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the Schedule. Such orders may be issued from 01 August 2014 through 31 July 2019. (b) All delivery orders or task orders are subject to the terms and conditions of this contract. In the event of conflict between a delivery order or task order and this contract, the contract shall control. (c) If mailed, a delivery order or task order is considered "issued" when the Government deposits the order in the mail. Orders may be issued orally, by facsimile, or by electronic commerce methods only if authorized in the Schedule. (End of clause) 52.216-19 ORDER LIMITATIONS. (OCT 1995) (a) Minimum order. The minimum placed by the government on any delivery order will not be less than 1 garment sets. (b) Maximum order. The maximum order placed by the government on any delivery order will not exceed 38 garment sets. (c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) above. (d) Notwithstanding paragraphs (b) and (c) above, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 15 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source. (End of clause) 52.216-22 INDEFINITE QUANTITY. (OCT 1995) (a) This is an indefinite-quantity contract for the supplies or services specified, and effective for the period stated, in the Schedule. The quantities of supplies and services specified in the Schedule are estimates only and are not purchased by this contract. (b) Delivery or performance shall be made only as authorized by orders issued in accordance with the Ordering clause. The Contractor shall furnish to the Government, when and if ordered, the supplies or services specified in the Schedule up to and including the quantity designated in the Schedule as the "maximum". The Government shall order at least the quantity of supplies or services designated in the Schedule as the "minimum". (c) Except for any limitations on quantities in the Order Limitations clause or in the Schedule, there is no limit on the number of orders that may be issued. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations. (d) Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order. The contract shall govern the Contractor's and Government's rights and obligations with respect to that order to the same extent as if the order were completed during the contract's effective period; provided, that the Contractor shall not be required to make any deliveries under this contract after [insert date]. (End of clause) 52.216-23 EXECUTION AND COMMENCEMENT OF WORK (APR 1984) The Contractor shall indicate acceptance of this letter contract by signing three copies of the contract and returning them to the Contracting Officer not later than 3 days from date of receipt. Upon acceptance by both parties, the Contractor shall proceed with performance of the work, including purchase of necessary materials. (End of clause) 52.217-8 OPTION TO EXTEND SERVICES (NOV 1999) The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 5 years, 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within 30 Days. (End of clause) 52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000) (a) The Government may extend the term of this contract by written notice to the Contractor within 30 days; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 60 days before the contract expires. The preliminary notice does not commit the Government to an extension. (b) If the Government exercises this option, the extended contract shall be considered to include this option clause. (c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 5 years. (End of clause) 52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JULY 2013) (a) Definitions. As used in this clause-- Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority. Small business concern means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause. Such a concern is ``not dominant in its field of operation'' when it does not exercise a controlling or major influence on a national basis in a kind of business activity in which a number of business concerns are primarily engaged. In determining whether dominance exists, consideration shall be given to all appropriate factors, including volume of business, number of employees, financial resources, competitive status or position, ownership or control of materials, processes, patents, license agreements, facilities, sales territory, and nature of business activity. (b) If the Contractor represented that it was a small business concern prior to award of this contract, the Contractor shall represent its size status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon the occurrence of any of the following: (1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract. (2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract. (3) For long-term contracts-- (i) Within 60 to 120 days prior to the end of the fifth year of the contract; and (ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter. (c) The Contractor shall represent its size status in accordance with the size standard in effect at the time of this representation that corresponds to the North American Industry Classification System (NAICS) code assigned to this contract. The small business size standard corresponding to this NAICS code can be found at http://www.sba.gov/content/table-small-business-size-standards. (d) The small business size standard for a Contractor providing a product which it does not manufacture itself, for a contract other than a construction or service contract, is 500 employees. (e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting office in writing within the timeframes specified in paragraph (b) of this clause that the data have been validated or updated, and provide the date of the validation or update. (f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause. (g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following representation and submit it to the contracting office, along with the contract number and the date on which the representation was completed: The Contractor represents that it ( ) is, ( ) is not a small business concern under NAICS Code - assigned to contract number. (Contractor to sign and date and insert authorized signer's name and title). (End of clause) 52.222-22 PREVIOUS CONTRACTS AND COMPLIANCE REPORTS (FEB 1999) The offeror represents that -- (a) ( ) It has, ( ) has not participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; (b) ( ) It has, ( ) has not, filed all required compliance reports; and (c) Representations indicating submission of required compliance reports, signed by proposed subcontractors, will be obtained before subcontract awards. (End of provision) 52.225-18 PLACE OF MANUFACTURE (SEP 2006) (a) Definitions. As used in this clause-- Manufactured end product means any end product in Federal Supply Classes (FSC) 1000-9999, except-- (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. (b) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly-- (1) ( ) In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) ( ) Outside the United States. (End of provision) 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/ (End of clause) 252.209-7999 REPRESENTATION BY CORPORATIONS REGARDING AN UNPAID DELINQUENT TAX LIABILITY OR A FELONY CONVICTION UNDER ANY FEDERAL LAW (DEVIATION 2012-O0004) (JAN 2012) (a) In accordance with sections 8124 and 8125 of Division A of the Consolidated Appropriations Act, 2012,(Pub. L. 112-74) none of the funds made available by that Act may be used to enter into a contract with any corporation that- (1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government. (2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless the agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government. (b) The Offeror represents that- (1) It is [ ___ ] is not [ ___ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, (2) It is [ ___ ] is not [ ___ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months. (End of provision) 252.225-7048 EXPORT-CONTROLLED ITEMS (JUNE 2013) (a) Definition. ``Export-controlled items,'' as used in this clause, means items subject to the Export Administration Regulations (EAR) (15 CFR Parts 730-774) or the International Traffic in Arms Regulations (ITAR) (22 CFR Parts 120-130). The term includes-- (1) ``Defense items,'' defined in the Arms Export Control Act, 22 U.S.C. 2778(j)(4)(A), as defense articles, defense services, and related technical data, and further defined in the ITAR, 22 CFR Part 120; and (2) ``Items,'' defined in the EAR as ``commodities'', ``software'', and ``technology,'' terms that are also defined in the EAR, 15 CFR 772.1. (b) The Contractor shall comply with all applicable laws and regulations regarding export-controlled items, including, but not limited to, the requirement for contractors to register with the Department of State in accordance with the ITAR. The Contractor shall consult with the Department of State regarding any questions relating to compliance with the ITAR and shall consult with the Department of Commerce regarding any questions relating to compliance with the EAR. (c) The Contractor's responsibility to comply with all applicable laws and regulations regarding export-controlled items exists independent of, and is not established or limited by, the information provided by this clause. (d) Nothing in the terms of this contract adds, changes, supersedes, or waives any of the requirements of applicable Federal laws, Executive orders, and regulations, including but not limited to- (1) The Export Administration Act of 1979, as amended (50 U.S.C. App. 2401, et seq.); (2) The Arms Export Control Act (22 U.S.C. 2751, et seq.); (3) The International Emergency Economic Powers Act (50 U.S.C. 1701, et seq.); (4) The Export Administration Regulations (15 CFR Parts 730-774); (5) The International Traffic in Arms Regulations (22 CFR Parts 120-130); and (6) Executive Order 13222, as extended. (e) The Contractor shall include the substance of this clause, including this paragraph (e), in all subcontracts. (End of clause) 5352.201-9101 OMBUDSMAN (NOV 2012) (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMBC A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, the interested party may contact the Center/MAJCOM/DRU or AFISRA ombudsmen, AFICA/KS SCO, 150 Vandenberg Street, Peterson AFB, CO 80914 (P) 719-554-5300 (Fax) 719-554-5299 Email: afica.ks.wf@us.af.mil. Concerns, issues, disagreements, and recommendations that cannot be resolved at the MAJCOM/DRU or AFISRA level, may be brought by the concerned party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2397, facsimile number (571) 256-2341. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer. (End of clause) 5352.223-9001 HEALTH AND SAFETY ON GOVERNMENT INSTALLATIONS (JUN 1997) (a) In performing work under this contract on a Government installation, the contractor shall: (1) Comply with the specific health and safety requirements established by this contract; (2) Comply with the health and safety rules of the Government installation that concern related activities not directly addressed in this contract; (3) Take all reasonable steps and precautions to prevent accidents and preserve the health and safety of contractor and Government personnel performing or in any way coming in contact with the performance of this contract; and (4) Take such additional immediate precautions as the contracting officer may reasonably require for health and safety purposes. (b) The contracting officer may, by written order, direct Air Force Occupational Safety and Health Standards (AFOSH) and/or health/safety standards as may be required in the performance of this contract and any adjustments resulting from such direction will be in accordance with the Changes clause of this contract. (c) Any violation of these health and safety rules and requirements, unless promptly corrected as directed by the contracting officer, shall be grounds for termination of this contract in accordance with the Default clause of this contract. (End of clause) 5352.242-9000 CONTRACTOR ACCESS TO AIR FORCE INSTALLATIONS (NOV 2012) (a) The contractor shall obtain base identification and vehicle passes, if required, for all contractor personnel who make frequent visits to or perform work on the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished, contractor identification badges while visiting or performing work on the installation. (b) The contractor shall submit a written request on company letterhead to the contracting officer listing the following: contract number, location of work site, start and stop dates, and names of employees and subcontractor employees needing access to the base. The letter will also specify the individual(s) authorized to sign for a request for base identification credentials or vehicle passes. The contracting officer will endorse the request and forward it to the issuing base pass and registration office or security police for processing. When reporting to the registration office, the authorized contractor individual(s) should provide a valid driver's license, current vehicle registration, valid vehicle insurance certificate, and any other information as required by the 50th Security Forces Squadron, (719) 567-5620 to obtain a vehicle pass. (c) During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to the work site. (d) When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with AFI 31-101, Volume 1, The Air Force Installation Security Program, and AFI 31-501, Personnel Security Program Management, citing the appropriate paragraphs as applicable. (e) Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office. (f) Failure to comply with these requirements may result in withholding of final payment. (End of clause) (xi) Warranty terms and conditions necessary for this acquisition will be consistent with customary commercial practices. (xii) Any contract awarded as a result of this solicitation will not be a rated order under the Defense Priorities and Allocations System (DPAS). (xiii) Responding offerors shall include quotations and descriptive literature with their response to allow the Government to make a complete evaluation and appraisal of the offering format is required for your quote. ALL QUOTES ARE DUE BY FOUR (4) P.M. MOUNTAIN STANDARD TIME (04:00P.M. MST) Tuesday, 15 July 2014. (xiv) The Point of Contact for this acquisition is TSgt Jacob Lacefield, (719) 567-3277, or MSgt Bryan Pemberton, (719) 567-7332. Quotes can be emailed to jacob.lacefield@us.af.mil or bryan.pemberton@us.af.mil, or Fax to (719) 567-3438 (send email to confirm document has been received). To ensure the quote is received, you are encouraged to contact the POC with notification of which method your quote was submitted.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFSC/50CS/FA2550-14-T-2000/listing.html)
Place of Performance: Address: 50 CES, 500 O'Malley Ave. Ste 19, Schriever AFB, Colorado, 80912, United States; Zip Code: 80912
Record: SN03386389-W 20140607/140605234810-df9b509c89aff957c26aba1c961863c0 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

84 -- CE Clothing Lease - Attach #1 Performce Work Statement - Attach #2 Bid Schedule