Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF APRIL 17, 2014 FBO #4527
SOLICITATION NOTICE

48 -- Design, Fabricate, Assemble, Test, and Deliver One Fixed Cone Valve, Electric Operator, and Appurtenant Items for Summersville Dam, Summersville, WV.

Notice Date
4/15/2014
 
Notice Type
Presolicitation
 
NAICS
332311 — Prefabricated Metal Building and Component Manufacturing
 
Contracting Office
USACE District, Huntington, ATTN: CELRH-CT, 502 8th Street, Huntington, WV 25701-2070
 
ZIP Code
25701-2070
 
Solicitation Number
W91237-14-R-0011
 
Response Due
6/3/2014
 
Archive Date
7/3/2014
 
Point of Contact
Ginny M Morgan, 304-399-5963
 
E-Mail Address
USACE District, Huntington
(ginny.m.morgan@usace.army.mil)
 
Small Business Set-Aside
Total Small Business
 
Description
The Huntington District Corps of Engineers intends to procure a contract to fabricate, assemble, test, and deliver one fixed cone valve, electric operator, and appurtenant items. The fixed cone valve shall consist of a body, a gate, screw stems, seat rings, and thrust nuts. The operator shall include the floor stand, mounting bracket, shafts, reducer, and screw operating shafts. The valve shall be 106 3/4 quote mark diameter and designed to operate at a head of 350 feet. The valve body shall consist of a cylinder, a fixed internal deflector cone on the downstream end, internal radial vanes, and an upstream flange for attachment to a flanged pipe spool piece. The sealing and sliding surface of each valve body shall be stainless steel. Bearing surfaces of the body upon which the valve gate will slide shall be stainless steel. The valve gate shall be constructed such that the bearing surfaces on the gate which slide upon the valve body shall be bronze to provide a stainless steel on bronze sliding contract bearing surface. The operating gear unit for each valve shall consist of two threaded nut, two jacking screw stems, two bevel gear reducers mounted to the valve body, a miter gear box, drive shafts and one vertical shaft extending into the actuator mounted above the valve. The operating equipment shall consist of a pedestal stand, vertical worm gear reducer, hand operating mechanism, electric motor and control equipment, and visual gate position indicator, and removable support bracket. The valve shall be completely assembled and hydrostatically tested in the shop as well as performance and leakage tested. Field inspection by a representative of the manufacturer shall also be supplied to verify correct installation. The completed valve shall be delivered via tractor trailer with adequate supports to eliminate damage or deformation of the valve during shipment. The best value trade-off process will be used in this acquisition with award made, as a whole, to the offeror whose proposal conforms to the solicitation and is within a Technical/Price competitive range, if established, as determined by the Contracting Officer and has been evaluated as most advantageous to the Government. In addition to price/cost, all responsive proposals will be evaluated utilizing the following technical factors and other non-priced factors which are listed in descending order of importance: (1) Experience, (2) Past Performance, and (3) Ability to Provide Resources. Contract type will be a Firm Fixed Price and will be competitively negotiated. The NAICS code for this procurement is 332311, which has a size standard of an annual average of 500 employees. This announcement is set aside for small businesses. The anticipated award date of this contract is approximately July 1, 2014. Solicitation documents will be available on or about April 30, 2014. Solicitation packages will be available for download online at www.fbo.gov. To be eligible for contract award, a firm must be registered in the System for Award Management (SAM) website. Register via the SAM Internet site at http://www.sam.gov or by contacting the SAM Help Desk at 1-866-606-8220. Electronic or facsimile proposals will NOT be accepted. Questions may be submitted to Brandon H. Lewis, Contract Specialist, via e-mail at Brandon.H.Lewis@usace.army.mil or by facsimile: 304-399-5281.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA69/W91237-14-R-0011/listing.html)
 
Place of Performance
Address: USACE District, Huntington ATTN: CELRH-CT, 502 8th Street Huntington WV
Zip Code: 25701-2070
 
Record
SN03338935-W 20140417/140415234656-3eb02350975518b297fe532d8dd9ac38 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.