MODIFICATION
16 -- HELICOPTER TIE DOWN ASSY
- Notice Date
- 4/4/2014
- Notice Type
- Modification/Amendment
- NAICS
- 332710
— Machine Shops
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC), 2401 Hawkins Point Road, Building 31, Mail Stop 26, Baltimore, Maryland, 21226-5000, United States
- ZIP Code
- 21226-5000
- Solicitation Number
- HSCG40-14-Q-60970
- Archive Date
- 4/22/2014
- Point of Contact
- Kathleen Lobasso, Phone: 410-762-6494, ROBERT R. OROFINO, Phone: 410-762-6503
- E-Mail Address
-
kathleen.k.lobasso@uscg.mil, ROBERTR.OROFINO@USCG.MIL
(kathleen.k.lobasso@uscg.mil, ROBERTR.OROFINO@USCG.MIL)
- Small Business Set-Aside
- Total Small Business
- Description
- ADDITIONAL QUESTIONS ASKED AND ANSWERED: Q: Can we use 17-4 stainless steel plate that meets or is above the letter D revision? A: As long as it meets rev D it is fine. Q: In regards to item 4, side plates: when we were drawing the features and details of view 2-C we found that the coordinates of R3, R4,R5 did not produce a continuous profile with the inferred tangency shown.So my question is does this need to be updated first, and does the CAD model that will be provided after quoting supersede the drawing we see now. A: these are the same drawings that have been used several times in the past with no issues. Q: In regards to the tolerance statement of + or -.007, does this apply to the thickness as well or only the machined features because plate stock is not held to this tolerance. A: tolerance is + or -.007 unless otherwise noted.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/USCGELC/HSCG40-14-Q-60970/listing.html)
- Place of Performance
- Address: N/A, United States
- Record
- SN03330727-W 20140406/140404234948-671b212d067c90a3775cbff3e45441a5 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |