Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF MARCH 29, 2014 FBO #4508
DOCUMENT

65 -- Loaner Instrument Replacement - Attachment

Notice Date

3/27/2014
 

Notice Type

Attachment
 

NAICS

339112 — Surgical and Medical Instrument Manufacturing
 

Contracting Office

Department of Veterans Affairs;Network 11 Contracting Office;8888 Keystone Crossing;Suite 1100;Indianapolis IN 46240
 

ZIP Code

46240
 

Solicitation Number

VA25114Q0231
 

Archive Date

5/26/2014
 

Point of Contact

Kelly Poole
 

Small Business Set-Aside

N/A
 

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This solicitation RFQ-VA-251-14-Q-0231 is issued as a request for quote (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-12. No telephone requests will be accepted. Only written or email requests received directly from the requester are acceptable. Contractor shall provide the following line items to the Richard L. Roudebush VAMC, 1481 West Tenth Street, Indianapolis, IN 46202. FOB Destination: QTY: 1Description: REAMING ROD PUSH ROD WITH BALL HANDLEUM: EA 24.2MM THREE-FLUTED DRILL BIT QC/NEEDLE POINT/145MMEA 1STARDRIVE SCREWDRIVER T25/SELF-RETAININGEA 1CANNULATED STARDRIVE SCREWDRIVER T40/SELF-RETAININGEA 1RATCHET WRENCH-11MM WIDTH ACROSS FLATSEA 1HAMMER GUIDE FOR SLIDE HAMMEREA 1GRAPHIC CASE FOR TIBIAL NAIL-EX INSTRUMENT SETEA 1COMPRESSION DEVICE FOR TI CANNULATED TIBIAL NAILS-EXEA 1RADIOGRAPHIC CANAL WIDTH ESTIMATOR FOR IM NAILSEA 112.0MM PROTECTION SLEEVEEA 112.0MM CANNULATED AWLEA 1STANDARD INSERTION HANDLEEA 1AIMING ARM FOR TI CANNULATED TIBIAL NAILS-EXEA 23.2MM THREE-FLUTED DRILL BIT QC/330MM/100MM CALIBRATIONEA 1RADIOGRAPHIC RULER FOR TI CANNULATED TIBIAL NAILSEA 1HOLDING DEVICE FOR GUIDE WIRES AND REAMING RODSEA 112.0MM CANNULATED DRILL BIT LARGE QC/190MMEA 1CANNULATED CONNECTING SCREW FOR STANDARD INSERTIONEA 1DRIVING CAP WITH HANDLE ADAPTEREA 1SLIDE/FIXED HAMMER 700 GRAMSEA 112.0MM/8.0MM PROTECTION SLEEVE 188MMEA 18.0MM/4.2MM DRILL SLEEVE 200MMEA 14.2MM TROCAR 210MMEA 1BALL HEX SCREWDRIVER 8MMEA 23.2MM THREE-FLUTED DRILL BIT QC/NEEDLE POINT/145MMEA 1DIRECT MEASURING DEVICE FOR LCKNG SCR TO 100MM F/IM NAILSEA 24.5MM PIN WRENCH 120MMEA 1EXTRACTION SCREW FOR TI FEMORAL AND TIBIAL NAILSEA 1CANNULATED SHAFT WITH 8MM HEX 125MMEA 24.2MM THREE-FLUTED DRILL BIT QC/330MM/100MM CALIBRATIONEA 18.0MM/3.2MM DRILL SLEEVE 200MMEA 13.2MM TROCAREA 1DEPTH GAUGE FOR LOCKING SCREWS TO 100MM FOR IM NAILSEA 1DEPTH GAUGE FOR 2.0MM/2.4MM AND 2.7MM SCREWSEA 11.8MM VARIABLE ANGLE LOCKING DRILL GUIDE/CONEEA 11.8MM VARIABLE ANGLE LOCKING DRILL GUIDE/COAXIALEA 1GRAPHIC CASE/FULL LENGTH 4 BAY/F/MODULAR GC SYSTEMEA 12/3 INSTR TRAY FOR LCP AND VA-LCP DISTAL RADIUS SYSTEMSEA 11/3 INSTR TRAY FOR DSTL RADIUS FORCEPS AND BENDING PLIERSEA 11/3 INSTR TRAY FOR DSTL RAD RETRACTORS/HOOK/ELEVATORSEA 22.0MM DRILL BIT/QC/100MMEA 22.7MM DRILL BIT/QC/100MMEA 21.8MM DRILL BIT WITH DEPTH MARK/QC/110MMEA 22.4MM DRILL BIT/QC/100MMEA 1STARDRIVE SCREWDRIVER T8EA 1HANDLE WITH QUICK COUPLING, SMALLEA 1STARDRIVE SCREWDRIVER SHAFT T8 105MMEA 1STARDRIVE SCREWDRIVER SHAFT T8 55MMEA 1HOLDING SLEEVE FOR STARDRIVE SCREWDRIVER SHAFT T8EA 1SHARP HOOKEA 2THREADED LCP(TM) DRILL GUIDE F/LCP(TM) DISTAL RADIUS PLATESEA 11.8MM UNIVERSAL VARIABLE ANGLE LOCKING DRILL GUIDEEA 12.4MM UNIVERSAL DRILL GUIDEEA 12.7MM UNIVERSAL DRILL GUIDEEA 11.25MM K-WIRE INSERTEA 2BENDING PLIERS-SMOOTH JAWS FOR MINI PLATESEA 2BENDING PIN FOR 2.4MM LOCKING PLATESEA 1REDUCTION FORCEPS WITH POINTS BROAD-RATCHETEA 1TERMITE FORCEPS 90MMEA 1PERIOSTEAL ELEVATOR 3MM CURVED BLADE-STRAIGHT EDGEEA 1PERIOSTEAL ELEVATOR 3MM CURVED BLADE - ROUND EDGEEA 1REDUCTION FORCEPS WITH POINTS RATCHET 130MMEA 21.8MM DRILL GUIDE WITH MEASURING FOR GUIDE BLOCKEA 1HANDLE FOR TORQUE LIMITING ATTACHMENTEA 1TORQUE LIMITING ATTACHMENT 0.8NM/QUICK COUPLINGEA 1SCREW RACK FOR 2.4MM VA-LCP DSTL RADIUS SYS GRAPHIC CASEEA 1GUIDE BLOCK FOR TWO-COLUMN PLATE/NARROW 6H HD/RTEA 1GUIDE BLOCK FOR TWO-COLUMN PLATE/NARROW 6H HD/LTEA 1MODULE FOR VA-LCP 2-COLUMN VOLAR DSTL RADIUS PL/NARROWEA 1GUIDE BLOCK FOR 2 COLUMN PLATE 6 HOLE HEAD/RIGHTEA 1GUIDE BLOCK FOR 2 COLUMN PLATE 6 HOLE HEAD/LEFTEA 1GUIDE BLOCK FOR 2 COLUMN PLATE 7 HOLE HEAD/RIGHTEA 1GUIDE BLOCK FOR 2 COLUMN PLATE 7 HOLE HEAD/LEFTEA 1MODULE F/VA-LCP 2-COLUMN VOLAR DISTAL RADIUS PLATEEA 1MODULE FOR VA-LCP VOLAR EXTRA-ARTICLR DSTL RADIUS PLEA 1SMALL HOHMANN RETRACTOR 6MM SHORT NARROW TIP 160MMEA 1SMALL HOHMANN RETRACTOR 8MM SHORT NARROW TIP 160MMEA 4MODULE ADAPTERS FOR 1 HIGH MODULES/F/MODULAR GC SYSEA 1MODULE FOR 2.4MM VA-LCP DORSAL DISTAL RADIUS PLATESEA 1CANNULATED REVERSE AWLEA 1REAMING ROD MEASURING DEVICEEA 1TI TROCHANTERIC FIXATION NAIL INSERTION SET GRAPHIC CASEEA 1UNIVERSAL CHUCK WITH T-HANDLEEA 1SPANNER WRENCHEA 1HAMMER GUIDE FOR SLIDE HAMMEREA 1RATCHET WRENCH-11MM WIDTH ACROSS FLATSEA 1RADIOGRAPHIC RULER F/TROCHANTERIC FIXATION NAILSEA 13.2MM TROCAR 172MMEA 1DRIVING CAP FOR 357.411EA 1CANNULATED SHAFT WITH 8MM HEX 125MMEA 1INSERTION HANDLE F/TROCHANTERIC FIXATION NAILSEA 1BALL HEX SCREWDRIVER 8MM FOR TI FEMORAL NAILSEA 1HAMMER 500 GRAMSEA 1TISSUE PROTECTOREA 1SLIDE HAMMER FOR HAMMER GUIDEEA 117.0MM/3.2MM WIRE GUIDE 161MMEA 117.0MM CANNULATED DRILL BIT LARGE QC/300MMEA 2CANNULATED CONNECTING SCREW F/TROCHANTERIC FIXATION NAILSEA 122.0MM/17.0MM PROTECTION SLEEVEEA 1HOLDING SLEEVEEA 1MISS-A-NAIL AIMING JIGEA 1STAR/HEXDRIVE SCREWDRIVER T25 3.5MM HEX/SELF-RETAININGEA 13.2MM DRILL BIT/QC/145MMEA 1COUNTERSINK FOR 4.5MM CORTEX SCREWSEA 52.5MM WIRE GUIDE FOR 5.0MM SCREWSEA 1HANDLE FOR AO REAMING COUPLER CONNECTIONEA 14.5MM DRILL BIT/QC/145MMEA 14.5MM UNIVERSAL DRILL GUIDEEA 14.5MM/3.2MM INSERT DRILL SLEEVEEA 2PUSH-PULL REDUCTION DEVICE FOR 4.5MM LCP ® PLATESEA 44.3MM THREADED DRILL GUIDEEA 1ARTICULATED TENSION DEVICE WITH GAUGE-SPAN 20MMEA 1DIRECT MEASURING DEVICE FOR 5.0MM LOCKING SCREWSEA 1T-HANDLE WITH QUICK COUPLINGEA 1HOLDING SLEEVEEA 2TAP FOR 4.5MM CORTEX/SHAFT SCREWS 130MM/57MM TAP DEPTHEA 1SHARP HOOKEA Offorers must comply with all instructions contained in provision 52.212-1, Instructions to Offerors-Commercial, applies to this acquisition. The following additional provisions and clauses apply: 52.212-2, Evaluation-Commercial Item, the Government will award a purchase order resulting from this solicitation to the responsible offerors whose offer conforming to the solicitation will be most advantageous to the government, price and other factors considered. Price will be evaluated to determine its fairness, completeness, and reasonableness as it relates to the offer. 52.212-3, Offeror Representations and Certifications-Commercial Items, a completed copy of this provision shall be submitted with the offer unless ORCA registered which must be noted in quotation. 52.212-4, Contract Terms and Conditions-Commercial Items. 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items, to include clauses: 4,7, 25, 27, 36, 37, 46, 48. The following additional clauses apply: SAM Clause: Attention: You must be registered in SAM to be considered for award. FAR 52.204-7, Central Contractor Registration (Oct 2003) (B)(2) the offeror shall provide its DUNS or, if applicable, its DUNS+4 number with its offer, which will be used by the contracting officer to verify that the offeror is registered in the SAM database. (C) Lack of registration in the SAM database will make an offeror ineligible for award. Offerors and contractors may obtain information on registration and annual confirmation requirements by calling 1-866-606-8220 or via the Internet at https://www.SAM.gov. Electronic Funds: FAR 52.252-2, Clauses Incorporated by References (Feb 1998). This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. 852.232-72, Electronic Submission of Payment Requests, 852.270-4, Commercial Advertising. Upon request, the contracting officer will make their full text available. Offers are to be received via email to Kelly.poole@va.gov or at the VA NCO 11 Contracting Office, 8888 Keystone Crossing, Suite 1100, Indianapolis, IN 46202, ATTN: Kelly Poole no later than 2:00 P.M. eastern standard time on 2 April 2014. Contact Kelly Poole, Contract Specialist, Kelly.poole@va.gov.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/VA/InVAMC538/InVAMC538/VA25114Q0231/listing.html)
 

Document(s)

Attachment
 

File Name: VA251-14-Q-0231 VA251-14-Q-0231.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=1277429&FileName=VA251-14-Q-0231-000.docx)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=1277429&FileName=VA251-14-Q-0231-000.docx

 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Record

SN03322110-W 20140329/140327234713-40e80042d095b4b2d9f868886ab8cd1f (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |