MODIFICATION
34 -- Sharp Precision Toolroom Lathe 1118H
- Notice Date
- 3/10/2014
- Notice Type
- Modification/Amendment
- NAICS
- 333515
— Cutting Tool and Machine Tool Accessory Manufacturing
- Contracting Office
- Department of the Navy, Naval Air Systems Command, Naval Air Warfare Center Aircraft Division Pax River, Building 441, 21983 Bundy Road Unit 7, Patuxent River, Maryland, 20670, United States
- ZIP Code
- 20670
- Solicitation Number
- N00421-14-T-0132-02
- Archive Date
- 3/27/2014
- Point of Contact
- Bernardino Cortez, Phone: 3019951773
- E-Mail Address
-
bernardino.cortez@navy.mil
(bernardino.cortez@navy.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Solicitation N00421-14-T-0132-02-01 is issued as competitive brand name or equal procurement. The Government intends to purchase on a firm fixed-price basis, and to solicit and negotiate the proposed purchase order on a competitive basis for Sharp Precision Toolroom Lathe 1118H and accessories, under the authority implemented by Federal Acquisition Regulation (FAR) by FAR Part 12 and 13. The Sharp 1118H Precision Lathe will be used at the Structural Testing Laboratory of the Aircraft Instrumentation Division. The equipment being procured must be capable of machining fixtures to very tight tolerances (spindle accuracy - 50 millionth of an inch). As a minimum requirement, the lathe's bedway must be made out of a one piece alloy steel material, hardened, and ground ensuring high precision machining after many years of use. It has been determined that the Sharp 1118H Precision Lathe is the only known system capable of meeting the minimum requirement of this procurement request. Procurement is a total set-aside for small business under the authority of FAR Part 52.219-6. Your quote must contain enough technical information to evaluate your quote. Your quote will only be evaluated on the information you provide. ***Basis for Award*** All interested parties MUST submit a quote no later than 12 March 2014 by 4:00 PM (EST). The Government intends to award this on a brand name or equal basis. All interested parties MUST submit their quote no later than 4:00 PM (EST) 12 March 2014. If proposing an equal product, the lathe's bedway should be made out of a one piece alloy steel material, hardened, and ground. A supporting documentation (manual, data sheet) is required for certification otherwise the proposed product will not be considered. Award will be made to the vendor that submits the lowest, aggregate, firm fixed-price quotation that meets all salient characteristics. If two or more quotes are equal the award shall be made by drawing of lot limited to valid quotes. The drawing shall be witnessed by at least three persons, and the contract file shall contain the names and addresses of the witnesses and the person supervising the drawing. GPOC: Bernie Cortez @ Bernie.cortez@navy.mil (301-995-1773)
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVAIR/N00421/N00421-14-T-0132-02/listing.html)
- Place of Performance
- Address: Naval Air Warfare Center, PAX, Receiving Officer, Building 665, 47149 Vaughn Road, Patuxent River, Maryland, 20670, United States
- Zip Code: 20670
- Zip Code: 20670
- Record
- SN03306300-W 20140312/140310234611-085c2e16d3bad926b07e72016e23f9eb (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |