Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF JANUARY 29, 2014 FBO #4449
DOCUMENT

17 -- Replacement parts for Model 105 End-fire Glide Slope (EFGS) System - Attachment

Notice Date
1/27/2014
 
Notice Type
Attachment
 
Contracting Office
FEDERAL AVIATION ADMINISTRATION, AAQ-510 EN - Eastern Service Area (Atlanta, GA)
 
Solicitation Number
15443
 
Response Due
2/10/2014
 
Archive Date
2/10/2014
 
Point of Contact
Linda Hennequant, linda.hennequant@faa.gov, Phone: 404-305-5458
 
E-Mail Address
Click here to email Linda Hennequant
(linda.hennequant@faa.gov)
 
Small Business Set-Aside
N/A
 
Description
SINGLE SOURCE ANNOUNCEMENT The Federal Aviation Administration (FAA) intends to award a single source purchase order to procure replacement parts to rebuild and restore a Model 105 End-fire Glide Slope (EFGS) System. This is a brand specific system manufactured only by WATTS Antenna Company located in Herndon, Virginia. WATTS Antenna Company will deliver the parts identified in the Item List to rebuild a Model 105 End-fire Glide Slope Antenna System. This is a ground-based instrument approach system that provides precision guidance to an aircraft approaching and landing on a runway, using a combination of radio signals to enable a safe landing during instrument meteorological conditions (IMC), such as low ceilings or reduced visibility due to fog, rain, or blowing snow. A glide slope is an independent sub-system which provides vertical guidance to aircraft approaching a runway. A glide slope (GS) antenna array is sited to one side of the runway at the touchdown point and its signal is transmitted on a specific carrier frequency. This fixed price purchase order will be issued at an estimated amount of $187,000.00 with delivery due within six months after award. This procurement will be conducted under the guidelines of the FAA Acquisition Management System. This policy allows, when it is in the best interest of the Government, for single source procurement, AMS Policy Section 3.2.2.4. End-Fire antenna is the only antenna approved for NAS deployment which can accommodate terrain where image-type antennas do not work properly. End-Fire is a brand name and there are no substitutions approved for NAS deployment. This is a Re-build for restoral purposes of an existing Model 105 End Fire Glide Slope Antenna System. The procuring office for this contract is the Federal Aviation Administration (FAA), FAA Contracting Office, Southern Region AAQ-510, 1701 Columbia Ave, College Park, Ga 30337. This announcement is for informational purposes only, not a solicitation or request for proposal. A full and open competition is not available for this procurement. If you're viewing this announcement from a source other than Federal Aviation Administration Contract Opportunities (FAACO), visit https://faaco.faa.gov/index.cfm/announcement/view/15443 to view the original announcement.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/DOT/FAA/SR/15443/listing.html)
 
Document(s)
Attachment
 
File Name: Item List (docx) (https://faaco.faa.gov/index.cfm/attachment/download/35744)
Link: https://faaco.faa.gov/index.cfm/attachment/download/35744

 
Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 
Record
SN03275320-W 20140129/140127234737-6844d129aa521ba9f6dce06f92506565 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.