Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF JANUARY 16, 2014 FBO #4436
DOCUMENT

65 -- Surgical Drills, Saws, and Accessories - Attachment

Notice Date

1/14/2014
 

Notice Type

Attachment
 

NAICS

339112 — Surgical and Medical Instrument Manufacturing
 

Contracting Office

U.S. Department of Veterans Affairs;Strategic Acquisition Center;10300 Spotsylvania Ave;Fredericksburg VA 22408
 

ZIP Code

22408
 

Solicitation Number

VA11914Q0040
 

Response Due

1/23/2014
 

Archive Date

3/24/2014
 

Point of Contact

Debbie Frankovich
 

Small Business Set-Aside

N/A
 

Description

Sources Sought Synopsis for Surgical Power Tools for the Department of Veterans Affairs, Veterans Health Administration (VHA). The VHA Surgery Program Management Office (PMO) has identified surgical power tools as a candidate item for standardization. The purpose of this sources sought is to conduct market research to support their procurement. VHA Surgery PMO desires to procure quality items that meet the Minimum Technical Requirements (MTRs); therefore, it is the Government's specific intent through this market research, supported by published and/or documented evidence, to find surgical power tools as listed in Attachment 1. This sources sought encourages potential contractors to submit a non-binding statement of interest and documentation substantiating they have a product they feel meets the stated requirement. Further, it is intended to assess industry's capability to support and/or develop an adequate solution to the Government's continuing need(s). The Strategic Acquisition Center (SAC) is requesting responses from qualified business concerns; the qualifying NAICS code for this effort is 339112 "Surgical and Medical Instrument Manufacturing.". The intent of this synopsis is to gain knowledge of potential qualified sources and their size classifications, Service Disabled/Veteran Owned Small Business (SDVOSB/VOSB), HUBZone Program, 8(a), Small Business (SB), Small Disadvantaged Business, Woman Owned Small Business, or large business (LB); relative to NAICS 339112. Responses to this notice, will be used by the Government to make appropriate acquisition decisions. After review of the responses to this notice, a solicitation announcement may be published. Responses to this synopsis are not considered adequate responses to any corresponding solicitation announcement. All interested offerors will have to respond to the solicitation announcement in addition to responding to this synopsis. PLEASE INDICATE WHETHER YOU HOLD A GSA FEDERAL-SUPPLY SCHEDULE CONTRACT THAT COVERS THESE PRODUCTS AND, IF SO, A CONTRACT NUMBER MUST BE PROVIDED. Provide BUSINESS SIZE AND SOCIO-ECONOMIC STATUS; (a) Indicate whether your business is a SB or LB. (b) If small, indicate if your firm qualifies as a small, emerging business, or small disadvantaged business. If disadvantaged, specify the disadvantaged group. (c) Specify if your firm is certified under Section 8(a) of the Small Business Act. (d) Indicate if your firm is a certified Service-Disabled Veteran Owned Small Business (SDVOSB) or Veteran Owned Small Business (VOSB). (e) Include the DUNS number of your firm. (f) State whether your firm is registered with the System for Award Management (SAM) at http://www.sam.gov and/or the VetBiz Registry at http://vip.vetbiz.gov. If not, please NOTE that any future solicitation could only be awarded to a contractor who is registered in SAM; in order to receive award based on VOSB or SDVOSB status you must be registered in the VetBiz Registry. (g) Provide current commercial pricing for all items listed in Attachment 1. (h) Link to the respondent's General Services Administration (GSA) schedule, or attached file of same, if applicable. (i) Citation of any current or past customers (i.e., within the past two (2) years) to include contract number, point of contact telephone number or e-mail address; and (J) Other material relevant to establishing core competencies of the firm. Please submit your response electronically (e-mail only) to Ms. Debbie Frankovich, Contract Specialist, at debbie.frankovich@va.gov no later than Thursday, January 23rd, 2014 by 3:00 PM ET. Your response should include the STATEMENT OF CAPABLILITY, GSA SCHEDULE INFORMATION, and BUSINESS SIZE AND SOCIO-ECONOMIC STATUS information as explained above. Please place "Attention: Surgical Power Tools" in the subject line of your email. Disclaimer: The sources sought synopsis is issued for planning purposes only in accordance with Federal Acquisition Regulation (FAR) Part 10. The Government is not committed to issue a solicitation or award a contract pursuant to this announcement. Responses to this synopsis are not offers and cannot be accepted by the Government to form a binding contract in accordance with FAR 15.201(E). The Government will not entertain phone calls concerning this notice, and will not pay any costs incurred in the preparation of information for responding to this market research or the Government's use of the information. Proprietary information must be clearly identified as such. Attachment 1 Minimum Technical Requirements MTR 1Stainless steel surgical power tool with quick chuck capabilities and able to be sterilized by steam autoclave Pre-Vac cycle. MTR 2Attachments: Sagittal saw, reciprocating saw, and sternum saw (all with variable speed), dual trigger rotary and single trigger rotary. All attachments able to be sterilized by steam autoclave Pre-Vac cycle. MTR 3Sternum saw: Both 180 °-360 ° rotating head and blade guard can protect soft tissue around sternum. MTR 4Reamer: Hi-torque for acetabulum or medullary operation. MTR 5Accessories: Dual and Single Trigger Pin Collect to accommodate sizes 2.0-4.2mm, Dual and Single Trigger Wire Collect to accommodate sizes.7-1.8mm, A/O Quick Connect, Hudson, ¼" and 5/32" keyed Chuck, ¼" and 1/8" keyless chucks, Hudson Modified Trinkle, Trinkle, Large A/O, DHS/DCS, Triathlon Adapter, Sternum Blade Guard. MTR 6Batteries: Rechargeable Lithium Ion Cell Technology. MTR 7Universal charger with charging indicator, charge complete and battery fault or replace indicators. MTR 8Sterilization Case: Stainless steel with sealed containers and sterilization insert tray that fits rigid sterilization containers.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/notices/e8ee75181f1e3d329e9b08ed6adda53f)
 

Document(s)

Attachment
 

File Name: VA119-14-Q-0040 VA119-14-Q-0040_3.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=1159513&FileName=VA119-14-Q-0040-001.docx)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=1159513&FileName=VA119-14-Q-0040-001.docx

 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Record

SN03267808-W 20140116/140114234739-e8ee75181f1e3d329e9b08ed6adda53f (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |