SOURCES SOUGHT
61 -- BATTERY ASSEMBLY
- Notice Date
- 12/19/2013
- Notice Type
- Sources Sought
- NAICS
- 335911
— Storage Battery Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime - BSM, P O Box 3990, Columbus, Ohio, 43216-5000, United States
- ZIP Code
- 43216-5000
- Solicitation Number
- SPE7LX14R0082
- Archive Date
- 1/8/2014
- Point of Contact
- Shonna A. Gray, Phone: 6146923593, Russell C. Edwards, Phone: 1-614-692-8245
- E-Mail Address
-
shonna.gray@dla.mil, Russell.Edwards@DLA.MIL
(shonna.gray@dla.mil, Russell.Edwards@DLA.MIL)
- Small Business Set-Aside
- N/A
- Description
- NSN: 6140-01-431-5807 BATTERY ASSEMBLY SEALED LEAD ACID MSDS/PSDS REQUIRED PER FED-STD-313 SHELF LIFE TYPE II, 12 MONTHS THIS SHELF LIFE ITEM IS EXTENDABLE, CODE 4, WITH A TOTAL SHELF LIFE OF TWELVE MONTHS. MATERIAL FURNISHED UNDER THIS CONTRACT/ORDER SHALL HAVE AT LEAST 85% (10 MONTHS) OF THE SHELF LIFE REMAINING AT TIME OF DELIVERY. 1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS REQUIRED 2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY. MIL-STD-130N DATED 16 NOV 2012. IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR VALUATION. MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). THE CONTRACTOR SHALL PROVIDE A MATERIAL SAFETY DATA SHEET (MSDS) AS DIRECTED BY FAR 52.223-3, HAZARDOUS MATERIAL IDENTIFICATION AND MATERIAL SAFETY DATA (JAN 1997). A COPY OF THE APPLICABLE HAZARD WARNING LABEL(S) (HWL) SHALL BE SUBMITTED WITH THE MSDS AS DIRECTED BY DFARS 252.223-7001, HAZARD WARNING LABELS (DEC 1991). THE MSDS SHALL BE IAW FEDERAL STANDARD 313 (LATEST REVISION) AND CONFORM TO OSHA'S HAZARD COMMUNICATION STANDARD IN TITLE 29 CFR 1910.1200 (LATEST REVISION) AND SHALL BE SUBMITTED BY THE APPARENTLY SUCCESSFUL OFFEROR PRIOR TO CONTRACT AWARD AS DIRECTED BY DLAD 52.223-9000, MATERIAL SAFETY DATA SHEETS AND HAZARD WARNING LABELS (NOV 2011). TO SATISFY THE FED-STD-313 REQUIREMENT, THE CONTRACTOR SHALL SUBMIT THE APPLICABLE MSDS AND HWL TO THE LOCAL ADMINISTERING AGENCY'S CONTRACTING OFFICE FOR PROCEDURAL REVIEW AND APPROVAL PRIOR TO CONTRACT AWARD. CONTRACTOR MUST EXERCISE A DUTY OF CARE THAT EACH MSDS BE REGULARLY UPDATED (USUALLY EVERY THREE TO FIVE YEARS) OR WITHIN 3MONTHS OF ANY CHANGES PER U.S. CODE, TITLE 42, CHAPTER 116, SUBCHAPTER II, PARAGRAPH 11021(D). Material is Type II shelf life and shall be marked IAW Mil-Std-129 for shelf life in addition to other required special markings. AMETEK PROGRAMMABLE POWER, INC. 25965 P/N 5151502-01 PACKAGING: SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951. Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply: •,,All containers shall meet ASTM D4169, Standard Practice for Performance Testing of Shipping Containers and Systems. •,,All Section D Packaging Clauses take precedence over ASTM D3951. •,,In addition to requirements in MIL-STD-129P, all Labeling and Marking shall have a Method of Preservation of Commercial Pack applied to the MIL-STD-129 identification labels on all shipping containers, including the unit and intermediate levels. The Method of Preservation (M) of Commercial Pack (CP) shall be applied to all labels and marking as "MCP." •,,For all shipments of packaged materiel to the Government, which includes either Depot (DLA-Direct) or DVD (Customer-Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required in accordance with MIL-STD-129. See DLAD 52.211-9010 for exceptions to the Military Shipment Label (MSL) requirement. When the MSL is required, the Transportation Control Number (TCN) is not an exception and must always be present. TCN construction is detailed in DTR 4500.9-R (Appendix L). •,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over ASTM D3951. •,,Loose-fill cushioning and dunnage materials are prohibited in all shipments to DOD customers. •,,Unitization in accordance with MIL-STD-147, Palletized Unit Loads, is required for all shipments to the DOD activities.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC-BSM/SPE7LX14R0082/listing.html)
- Record
- SN03255273-W 20131221/131219234712-d321188f558e072d1dd58f39f6a83725 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |