SOLICITATION NOTICE
30 -- Coupling shaft, rigid
- Notice Date
- 12/11/2013
- Notice Type
- Presolicitation
- NAICS
- 336350
— Motor Vehicle Transmission and Power Train Parts Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43218-3990, United States
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7L314R0001
- Point of Contact
- Robert J. Varcho, Phone: 614-692-1372, Richard J Matz, Phone: 614-692-8148
- E-Mail Address
-
robert.varcho@dla.mil, richard.matz@dla.mil
(robert.varcho@dla.mil, richard.matz@dla.mil)
- Small Business Set-Aside
- N/A
- Description
- DESCRIPTION: NSN 3010-01-092-7491 - "Coupling Shaft, Rigid" being bought in accordance with Sikorsky Aircraft (Cage 78286, P/N 70361-05011-101), Rexnord Industries (Cage 59747; P/N 35735) or OGS Industries (Cage 8A623, P/N 7036105011101). The required quantity is 6,000 each, with 127 pieces to be shipped to DLA Distribution San Diego, 2,680 to be shipped to DLA Distribution Red River, and 3,193 to be shipped to DLA Distribution Warner Robins. FOB Destination and Inspection/Acceptance at Origin is required. Based on Market Research, the Government is not using the policies contained in Part 12, Acquisition of Commercial items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capabilities to satisfy the Governments requirement with a commercial item within 15 days of this notice. This is an UNRESTRICTED solicitation and is not set-aside for small business. This solicitation will be available at http://www.dibbs.bsm.dla.mil/rfp on or about 12/26/2013. Hard copies of this solicitation are not available. The required delivery for quantity of 6,000 each is 120 days. One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the US by the Trade Agreements Act of 1979. All offers shall be in the English language and in US dollars. Notice: This solicitation contains DLAD Provision 52.215-9023 for Reverse Auction (RA). The Government reserves the right to activate this provision after timely offers have been received and evaluated. All interested suppliers may submit an offer. Item Description: COUPLING, SHAFT, RIGID THE INTERNATIONAL ORGANIZATION FORSTANDARDIZATION (ISO) 9001:2008 OR A "TAILORED" PROGRAM MEETING THE FOLLOWING ISO 9001:2008PARAGRAPHS APPLIES: 4.2.4: CONTROL OF DOCUMENTS FOR INSPECTION ANDTESTING AS WELL AS APPLICABLE DRAWINGS SPECIFICATIONS AND INSTRUCTIONS REQUIRED BYTHE CONTRACT 7.4.2.A: PURCHASING OF MATERIAL AND REQUIREMENTSFOR APPROVAL OF PRODUCT 7.5.4: CUSTOMER PROPERTY (CUSTOMER SUPPLIEDPRODUCT OR MATERIAL) 7.5.3: PRODUCT IDENTIFICATION AND TRACEABILITY 7.5.1 AND 8.2.4: CONTROL OF PRODUCTION ANDSERVICE PROVISIONS / MONITORING AND MEASUREMENT OF PRODUCT 7.6: CONTROL OF MONITORING AND MEASURINGEQUIPMENT 7.5.1, 7.5.3, AND 8.2.4: CONTROL, IDENTIFY ANDMONITOR PRODUCT, PRODUCT DOCUMENTATION AND INSPECTION ACTIVITIES STATUS 8.3: CONTROL OF NON-CONFORMING PRODUCT 8.5.2 AND 8.5.3: CORRECTIVE AND PREVENTATIVEACTIONS 4.2.4: CONTROL OF RECORDS FAR CLAUSE 52.246-11 APPLIES SPECIFICATION THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TOEXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATAAND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIEDTHROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THEDEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TOINTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARYCRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDEWEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATILE CREEK, MI 49017-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT ACURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BYTHE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS ANEXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OFGENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICALDATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH ANAPPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TORECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TOTHEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATAUNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLYPERMITTED BY DODD 5230.25." MARK IAW MIL-STD-130N, DATED 16 NOV 2012. CONFIGURATION CONTROL APPLIES SEE CLAUSE 52.246-9G36 (SECTION I). 1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQZ1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BEAPPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS REQUIRED 2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSEFOR REJECTION OF THE ENTIRE CONTRACT QUANTITY. NOTE: THE CITED DRAWING IS A SOURCE CONTROLLEDDRAWING AND AS OF THE DATE OF THIS SOLICITATION ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVEDPART NUMBERS ARE PROVIDED, THE ITEMS FURNISHED MUST MEET THE REQUIREMENTS OF THE CITED DRAWING. OFFERORS WHO ARE INTERESTED IN QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE ACQUISITION MUST CONTACT THE COGNIZANT DESIGN ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED DRAWING. ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT THIS TIME. THE ORIGIN INSPECTION REQUIREMENT HAS BEEN VERIFIED AND REMAINS UNCHANGED CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. SIKORSKY AIRCRAFT 78286 P/N 70361-05011-101 REXNORD INDUSTRIES, LLC 59747 P/N 35735 OGS INDUSTRIES, INC 8A623 P/N 7036105011101 IAW BASIC DRAWING NR 78286 70361-05011 REVISION NR F2 DTD 10/20/2006 PART PIECE NUMBER: 70361-05011-101 IAW REFERENCE DRAWING NR 81996 TEST-STD-1 REVISION NR DTD 08/17/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 78286 SS5100 REVISION NR 39 DTD 10/27/2011 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 78286 SS9208 REVISION NR 49 DTD 06/22/2007 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 78286 SS9208 REVISION NR 49 DTD 03/31/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 78286 70361-05011 REVISION NR AP DTD 04/15/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 78286 SS8798 REVISION NR 13 DTD 11/22/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 78286 70361-05011 REVISION NR H DTD 03/05/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 78286 70361-05011 REVISION NR G DTD 08/08/2011 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 78286 70361-05011-101 REVISION NR DTD 08/16/2011 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 18876 70361-05011 REVISION NR H DTD 03/05/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 78286 SS8798 REVISION NR 12 DTD 01/29/2008 PART PIECE NUMBER:
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPE7L314R0001/listing.html)
- Record
- SN03250320-W 20131213/131212000554-d3232d4e3c8019d5a56ca3fa72367f7e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |