MODIFICATION
A -- Improved FLIR (I-FLIR) Sensor Dewer Cooler Bench (DCB)
- Notice Date
- 12/5/2013
- Notice Type
- Modification/Amendment
- NAICS
- 334511
— Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing
- Contracting Office
- ACC-APG - Washington, ATTN: CCCE-CW, 10205 Burbeck Road, Fort Belvoir, VA 22060-5863
- ZIP Code
- 22060-5863
- Solicitation Number
- W909MY14FLIRDCB
- Response Due
- 12/20/2013
- Archive Date
- 2/3/2014
- Point of Contact
- Erin Stevens, 703-704-0830
- E-Mail Address
-
ACC-APG - Washington
(erin.e.stevens2.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- REQUEST FOR INFORMATION: THIS IS NOT A SOLICITATION: No award will be made as a result of this request. This Request for Information (RFI) is for informational purposes only; this is not a Request for Proposals (RFP), or Request for Quotations (RFQ). No solicitation document exists and formal solicitation may or may not be issued by the Government as a result of the responses to this RFI. The Government will not be liable for payment of any response preparation expenses and is in no way obligated by the information received. The information provided may be used by the Army in developing a future acquisition strategy, Performance Work Statement (PWS), Statement of Objectives (SOO) and/or Performance Based Specification(s). Interested parties are responsible for appropriately marking proprietary or competition sensitive information contained in their response. NOTE: The use of RFI Number W909MY-14-FLIRDCB is for tracking purposes only. BACKGROUND/DESCRIPTION: The Army Contracting Command-Aberdeen Proving Ground (ACC-APG) Belvoir Division (ACC-APG-Belvoir) is conducting Market Research on behalf of the Project Manager, Terrestrial Sensors (PM TS), Product Manager Ground Sensors (PdM GS), Fort Belvoir, in accordance with Federal Acquisition Regulations (FAR) Part 10. PM TS/PdM GS is planning to develop, integrate, test and demonstrate dual-band Mid Wave Infrared (MWIR)/ Long Wave Infrared (LWIR) imaging sub-assemblies and electronic modules to replace the Army's existing Horizontal Technology Integration (HTI) Second Generation Forward Looking Infrared (HTI 2GF) B-Kit sub-assemblies and electronic modules. The purpose of this market research is to identify potential sources that have previously developed, fabricated, tested, and demonstrated a Dual Band Infrared Dewar Cooler Bench (DCB) and associated software, or have the capability to do so. The DCB is defined as the assembly and integration of the following 6 sub-assemblies and electronic modules: 1. Integrated Dewar /Cooler 2. Focal Plane Array (FPA) Format: HD 720x1280P 3. Dual Band Infrared FPA: o Mid-Wave IR o Long Wave IR 4. In-Dewar Variable F# mechanism 5. Control Electronics for the FPA 6. Control Electronics for the Cooler and Variable Aperture The DCB will be provided as Government Furnished Equipment (GFE) for integration into an upper assembly composed of Optics and Video Processing electronics called the B-Kit. The DCB and B-Kit sub-assemblies and electronic modules, defined under RFI W909MY-14-FLIRBKIT will be integrated on host platforms to compose an Improved FLIR (I-FLIR) sensor. The DCB components are currently defined by the following technical documents: a. MIL-PRF-A3347043: Performance Specification for the Improved FLIR (I-FLIR) Integrated Dewar Electronics Assembly (IDECA) b. A3347044: I-FLIR IDECA Interface Control Document c. A3347047 Drawing - IFLIR DCB mating Flange Reference d. A3347048 Drawing - IFLIR B-KIT/DCB Subassembly e. A3347045 Drawing - IFLIR DCB Mechanical Drawing The documents listed above are Distribution D restricted. The documents are authorized for use by the Department of Defense (DoD) and U.S. DoD contractors only. These documents also contain technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. These documents will be disseminated in accordance with provisions of DoD Directive 5230.25. Companies or organizations may request copies of these documents by providing their Point of Contact information listed below to Sharon Minor at Sharon.R.Minor.civ@mail.mil and must clearly state if and how they meet the conditions under which they can receive the documents referenced above. In addition, companies requesting the above information must register for an account with an internet accessible portal known as the Corporate Management System Online (CMS II). Registrants will access the CMS II website (https://www.mycmsportal.com) and follow instructions to complete registration. Documents are currently available for viewing in the CMS II under the I-FLIR folder so the registrants must specifically request access to only the I-FLIR folder. Access to the I-FLIR folder documents will only be granted upon verification that criteria dictated by Distribution D and export control restrictions are met by registered companies or organizations. Sources responding to this request for information must provide the following information: 1. Please provide the following Point of Contact information: Company: Address: Point of Contact: Phone Number: Fax Numbers: Email Address: 2. Please identify your company's business size standard based on the primary North American Industrial Classification System (NAICS) code of 334511. For more information, refer to http://www.sba.gov/content/table-small-business-size-standards : - Large Business Concern - Small Business (SB) Concern - 8(a) - Small Disadvantaged Business (SDB) - Woman-Owned Small Business - Historically Underutilized Business Zone (HUBZone) - Veteran-Owned Small Business - Service-Disabled Veteran-Owned Small Business 3. Brief summary of the company, of no more than 3 paragraphs. 4. A description of the equipment and information supporting any claims that the proposed equipment meets the configuration descriptions and any claims of their maturity. 5. Describe how you will either produce or subcontract for the DCB or components. Please identify sources of supply for any components or assemblies for which you intend to subcontract production. 6. Describe the schedule requirements to qualify the prime, subcontractors, or sub-tier suppliers to provide DCBs. 7. Past experience or information supporting any claims of having the capability to develop, fabricate, and test a DCB and associated software 8. Describe Test reports (internal or generated by an independent agency) or data derived from testing the equipment. Test report and data pages will not be included in the page count. 9. Provide product literature for both hardware and software 10. If you identify your company as a Small Business or any of the SB subcategories above, then is your company interested in a prime contract? 11. Under the current SB recertification regulations, do you anticipate your company remaining a small business, under primary stated NAICS code 334511? 12. If you are a small business and plan to be prime contractor on this effort please inform how you will meet the limitations on subcontracting Clause 52.219-14. 13. If you are a small business, can you go without a payment for 90 days? 14. If you are a small business does your company have experience as a prime contractor administering Contracts? If you answered yes, please provide as much of the following information as possible; Contract number(s); Dollar value; and similarity of scope and effort. Have you experience as a prime producing commercial items that may be of similar scope, complexity and nature. 15. If you are a small business, does your company possess the capabilities to provide the entire range of these requirements? If not, please list which requirements your company can provide? 16. Is your company planning on business arrangements with other companies, please list the process used in selecting the members? 17. Please provide details regarding proposed joint ventures, teaming arrangements, strategic alliances, or other business arrangements to satisfy these requirements. Offerors are encouraged to identify teams, indicating each team member's size based upon the NAICS code of the work that the team member may be doing. 18. Has your Company performed this type of effort or similar type effort (to include size and complexity) in the past, if so provide Contract Number, Point of Contact (POC), e-mail address, phone number, and a brief description of your direct support of the effort? 19. What are the core competencies of your employees that would support these requirements? Also, provide the total number of individuals currently employed by your company that are capable of supporting the requirements. 20. Does your company have a SECRET facility clearance or have access to one should it be required? 21. Does your firm possess an approved Defense Contract Audit Agency (DCAA) accounting system? 22. Does your company meet the Non-manufacturing Rule? If so, how? 23. Please explain your facility size to include any storage capabilities. 24. The Government is currently contemplating award of a multiple award, Cost Plus Fixed Fee type contract based on the trade-off source selection process. Vendors may submit alternate potential contract approaches. No further information or documentation will be provided. The Government requests that interested sources submit an electronic response of not more than ten (10) pages, 8.5 quote mark x 11 quote mark paper, 12-point, Times New Roman font, with a minimum of one (1) inch margins all around. Responses to Small Business Questions 9 thru 23 are in addition to the above stated ten (10) page limitation. Responses should include the company name, CAGE code, point of contact, and address. All interested Companies or organizations are encouraged to respond to the RFI by providing the information within 25 days from the issuance of this RFI. Proprietary information submitted in response to this RFI announcement MUST be marked accordingly and will be protected by the Government. Respondents are requested to submit one electronic copy of the responses to PdM GS POC, Sharon Minor, at Sharon.R.Minor.civ@mail.mil, and one copy to Contract Specialist, Erin Stevens, at Erin.E.Stevens2.civ@mail.mil. Include RFI number W909MY-14-FLIRDCB in the subject line. All requests for further information must be in writing and via email; telephonic requests for additional information will not be honored. You may request additional information from the Contract Specialist, Erin Stevens at Erin.E.Stevens2.civ@mail.mil and Contracting Officer, Rosetta Wisdom-Russell Rosetta.Wisdom-Russell.civ@mail.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/19cea4d27c31ded96f6f69bb2904254a)
- Place of Performance
- Address: ACC-APG - Washington ATTN: CCCE-CW, 10205 Burbeck Road Fort Belvoir VA
- Zip Code: 22060-5863
- Zip Code: 22060-5863
- Record
- SN03245898-W 20131207/131205234417-19cea4d27c31ded96f6f69bb2904254a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |