MODIFICATION
38 -- New Equipment Purchase
- Notice Date
- 9/20/2013
- Notice Type
- Modification/Amendment
- NAICS
- 333120
— Construction Machinery Manufacturing
- Contracting Office
- USACE District, St. Paul, Contracting Division CEMVP-CT, 180 East Fifth Street, St. Paul, MN 55101-1678
- ZIP Code
- 55101-1678
- Solicitation Number
- W912ES-13-T-0158
- Response Due
- 9/24/2013
- Archive Date
- 11/19/2013
- Point of Contact
- Dawn Linder, 651-290-5407
- E-Mail Address
-
USACE District, St. Paul
(dawn.m.linder@usace.army.mil)
- Small Business Set-Aside
- N/A
- Description
- This amendment revises the previously posted combined synopsis/solicitation. Some of the changes are as follows: Line Item 0002 is removed for a Telehandler machine. Also removed is one of the used Case Wheel Loaders for trade in. It clarifies that both buckets are to be the same size. Additional add-on items are included. The due date for quotations is extended to 11:00 AM CDT, September 25, 2013. (i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6 of the Federal Acquisition Regulation (FAR), as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. (ii) The reference number for this effort is W912ES-13-T-0158 and the solicitation is issued as a request for quotation (RFQ). (iii) The provisions and clauses incorporated into this solicitation document are those in effect at the time of publication. Provisions and clauses incorporated by reference have the same force and effect as if they were given in full text. (iv) This requirement is solicited as unrestricted. The associated NAICS code is 333120 and the small business size standard is 750 employees. (v) This requirement consists of one (1) line item as follows: Line Item 0001 Purchase of a new wheel loader with Integrated tool coupler system (1 each) or one new integrated tool carrier machine. Item 0001 is to include a trade-in value for (1) used Case Wheel Loader and shall be applied as a credit towards the purchase price of the new wheel loader. A cut/spec sheet is to be provided with the quote. The scope of work is for the purchase of (1) new wheel loader with Integrated tool coupler system or (1) new integrated tool carrier machine. Vendors shall bid either a wheel loader with an integrated tool coupler system or an integrated tool carrier machine. The machine must be new with no working hours on the machine other than operating hours. Machine must be equipped with all standard features installed from the manufacturer. In addition to the purchase of the new wheel loader, the vendor shall give a trade-in value for (1) used Case Wheel Loader and shall be applied as a credit towards the purchase price of the new wheel loader/integrated tool carrier. Details of the used Case Wheel Loader are listed below. The machine shall be delivered with (3) copies of the Owners Manual, Parts Manual, and Operators manual. The quotes for this solicitation shall include delivery, setup, test run and operational training. Upon delivery of the machine, it shall be inspected with U.S. Army Corps of Engineers (USACE) personnel and the vendor to verify the condition of the machine before it is in the possession of USACE. The setup, test run and operational training shall be provided by the dealer within one week of delivery. Wheel Loader/Integrated Tool Carrier Specifications Max Gross Engine HP: Shall be at least 170HP Tier Rating of Engine: Engine shall be a Tier 4 Interim rated Fuel: Diesel Operating Weight: Not to exceed 36,000 lbs Breakout Force: Of at least 28,000 lbs Tires: 20.5xR25 Radial tires Bucket size: 3.0 cuyd to 3.5 cuyd Bucket types: (1) General Purpose, with bolt-on cutting edge and (1) General Purpose, with a toothed cutting edge (both buckets shall be the same size) Changing attachments shall be conducted from the operator inside the cab of the machine Additional add-on items on the Wheel Loader or Integrated Tool Carrier: Cold start system equipped with a block heater Enclosed cab with heat and air conditioning Integrated tool coupler system (wheel loader models only) Forks attachment, Forks shall be a minimum of 60 quote mark in length Material handling/lifting arm attachment Manufacturer recommended counterweight for use of tool coupler system Machine shall be equipped with OEM installed crane pick points Additional factory work light packages installed on machine Optional tool box installed on machine equipped with required maintenance tools OEM installed rear view camera and monitor OEM installed load indicating device, if available from manufacturer (electronic device mounted inside the operator cab that displays the weight of the load on the machine) Air-suspension seat for operator AM-FM stereo radio Ride control system Auxiliary hydraulic lines for hydraulic operated attachments Used Case Wheel Loader (Please contact Scott Uhl to view the used Case wheel loader) -(1) 1992 Case Model 821 Wheel Loader Product ID #: JAK0024301 Hours: 3,782 Payment and Delivery Information The equipment shall be delivered to the Maintenance and Repair Section: Lock and Dam No. 8 4405 Highway 35 Genoa, WI 54632 Hours of operation are 7:00 AM thru 3:30 PM. The facility is closed during the evenings, on weekends and all Government holidays. Delivery Date Equipment shall be delivered by 15 November 2013. POC: Scott Uhl, Chief, Maintenance & Repair Office - 651-290-5987 Cell - 612-508-3156 All invoices shall be sent to: Fountain City Service Base Attn: Tammy Kime PO Box 397 431 North Shore Drive Fountain City, WI. 54629 (vii) The provision at 52.212-1, Instructions to Offerors Commercial Items, applies to this solicitation. (viii) The provision at 52.212-3 Alt. I, Offeror Representations and Certifications Commercial Items applies to this solicitation. The contractor shall return a completed copy of this provision with its quotation. (ix) The clause at 52.212-4, Contract Terms and Conditions Commercial Items, applies to this acquisition. (x) The clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders Commercial Items, applies to this acquisition with the following clauses incorporated: 52.203-6, Restrictions on Subcontractor Sales to the Government Alt I, 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards, 52.209-6, Protecting the Government's Interest when Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment, 52.219-8, Utilization of Small Business Concerns, 52.219-28, Post Award Small Business Program Representation, 52.222-3, Convict Labor, 52.222-19, Child Labor-Cooperation with Authorities and Remedies, 52.22-21, Prohibition of Segregated Facilities, 52.222-26, Equal Opportunity, 52.22-35, Equal Opportunity for Veterans, 52.222-36, Affirmative Action for Workers with Disabilities, 52.222-37, Employment Reports on Veterans, 52.222-40, Notification of Employee Rights under the National Labor Relations Act, 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving, 52.225-1, Buy American Act-Supplies, 52.225-13, Restrictions on Certain Foreign Purchases, 52.232-33, Payment by Electronic Funds Transfer-System for Award Management. The following FAR clauses are applicable to this acquisition. 52.204-4, Printed or Copied Double-Sided on Postconsumer Fiber Content Paper, 52.204-5, Women-Owned Business (Other Than Small Business), 52.204-7, System for Award Management, 52.222-22, Previous Contracts and Compliance Reports, 52.222-25, Affirmative Action Compliance, 52.222-50, Combating Trafficking in Persons, 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-Representation and Certifications, 52.252-1, Solicitation Provisions Incorporated by Reference filled in with http://www.acquisition.gov/far, 52.252-2, Clauses Incorporated By Reference filled in with http://www.acquisition.gov/far, (xii) The DFAR clause at 252.203-7000, Requirements Relating to Compensation of Former DoD Officials, 252.203-7002, Requirement to Inform Employees of Whistleblower Rights, and 252.203-7005, Representation Relating to Compensation of Former DoD Officials are applicable to this acquisition. (xiii) The following are also applicable to this acquisition; 252.204-7003, Control of Government Personnel Work Product, 252.204-7004 Alt. A, System for Award Management Alternate A, 252.209-7001, Disclosure of Ownership or Control by the Government of a Terrorist County, 252.225-7001, Buy American and Balance of Payments Program, 252.225-7012, Preference for Certain Domestic Commodities, 252.225-7031, Secondary Arab Boycott of Israel, 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports, 252.232-7003, Electronic Submission of Payment Request and Receiving Reports, 252.232-7010, Levies on Contract Payments, and 252.243-7001, Pricing of Contract Modifications. To be awarded this contract, the offeror must be registered in the System for Award Management (SAM). SAM information may be found at http://sam.gov. Any questions regarding this RFQ #W912ES-13-T-0158 should be submitted by email to Dawn Linder at dawn.m.linder@usace.army.mil. The U.S. Army Corps of Engineers is an Agency of the Federal Government. (Dept. of Defense), and is therefore, tax exempt. Federal Tax I.D. NO. 62-1642142. (xiv) The Defense Priorities and Allocations System (DPAS) is not applicable to this acquisition. (xv) Quotations are due to the St. Paul District Corps of Engineers, 180 East Fifth Street, Suite 700, St. Paul, MN 55101-1678 11:00 AM CDT, September 25, 2013. Faxed or emailed quotes are acceptable. You may submit your quote by email to Dawn Linder at dawn.m.linder@usace.army.mil or by FAX to 651-290-5706. If you have any questions about submitting your quote, please send an email to Dawn Linder at the email address provided above (xvi) The assigned Specialist is Ms. Dawn Linder. Ms. Linder may be reached at dawn.m.linder@usace.army.mil, (651)290-5407 or by fax, (651)290-5706.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA37/W912ES-13-T-0158/listing.html)
- Place of Performance
- Address: USACE District, St. Paul Contracting Division CEMVP-CT, 180 East Fifth Street St. Paul MN
- Zip Code: 55101-1678
- Zip Code: 55101-1678
- Record
- SN03196906-W 20130922/130920235327-8728c9c9812a1fd5629064b69f1c0c98 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |