MODIFICATION
71 -- Systems Furniture for PBS Office
- Notice Date
- 9/19/2013
- Notice Type
- Modification/Amendment
- Contracting Office
- 4100 W. Third St, Dayton, OH 45428
- ZIP Code
- 45428
- Solicitation Number
- VA250-13-Q-0611
- Response Due
- 9/23/2013
- Archive Date
- 3/22/2014
- Point of Contact
- Name: Todd Cress, Title: Contract Specialist, Phone: 9372623386, Fax:
- E-Mail Address
-
todd.cress@va.gov;
- Small Business Set-Aside
- N/A
- Description
- MODIFICATION NOTICE:Bids are being solicited under solicitation number VA250-13-Q-0611. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation is issued as an invitation for bids (IFB), unless otherwise indicated herein.If your company can provide the product/services listed on the solicitation and comply with all of the solicitation instructions, please respond to this notice. To view the specifications, please go to www.FedBid.com and reference Buy No. 558377. GSA Schedule Bids Only: Sellers bidding on this opportunity MUST have the items requested on an existing GSA Schedule. The Schedule must either be in the Seller's name or the Seller must be able to document its ability to act as an agent of a partner's Schedule. Sellers must not bid more than their applicable contract ceiling price, excluding the FedBid Fee, for contract-specific items. If FedBid receives notice that, due to inclusion of the FedBid Fee, the Selected Bid's line item pricing is higher than the Selected Seller's applicable published government contract pricing, the FedBid Fee will be reduced to ensure the Selected Bid's line item pricing does not exceed the Selected Seller's applicable contract pricing. Sellers may offer Open Market items only in accordance with the approved Terms and Conditions of their respective GSA Schedule AND upon approval from the soliciting Contracting Officer. Information regarding GSA Schedules can be found at www.GSA.gov. This requirement is unrestricted and only qualified sellers may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-09-23 12:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Dayton, OH 45428 The VHA NCO 10 - 250 - Dayton, OH requires the following items, Meet or Exceed, to the following: LI 001: This is a Best Value Procurement. This award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to Buyer. Rooms EW-302, EW-303, EW-304, EW-305, EW-306, EW-307A, EW-318 Quantity of 1 each of the following item per room: -60?w X 30?d freestanding desk unit with removable full modesty -36?w X 24?d freestanding left return with BBF pedestal with removable full modesty -Wall mounted 36?w overhead flipper cabinet with metal sides and door, Tack board and Task light -Wall mounted 30?w overhead flipper cabinet with metal sides and door, Tack board and Task light -36?w 5 high lateral file -Each room keyed alike, each room different Finishes for furniture: Panel frames, base, flipper door units, wall strips, pedestal units, file cabinets and desk unit vertical sections? metal finish shall be Charcoal Task lights shall be Black Desk horizontal work surface shall be Medium Cherry Edge banding around work surface shall be Charcoal Tack Board fabric shall be Shimmer Glass - Grade B Panel fabric shall be Iowa Rice Lake - Grade A Glazed panels shall be clear tempered glass All lock cores shall be Black Must meet minimum Ansi and Bisma Standards, 7, JB; LI 002: Rooms EW-309, EW-316 Quantity of 1 each of the following item per room: -60?w X 30?d freestanding desk unit with removable full modesty -36?w X 24?d freestanding left return with BBF pedestal with removable full modesty -Wall mounted 36?w overhead flipper cabinet with metal sides and door, Tack board and Task light -Wall mounted 30?w overhead flipper cabinet with metal sides and door, Tack board and Task light -36?w 5 high lateral file -Each room keyed alike, each room different Finishes for furniture: Panel frames, base, flipper door units, wall strips, pedestal units, file cabinets and desk unit vertical sections? metal finish shall be Charcoal Task lights shall be Black Desk horizontal work surface shall be Medium Cherry Edge banding around work surface shall be Charcoal Tack Board fabric shall be Shimmer Glass - Grade B Panel fabric shall be Iowa Rice Lake - Grade A Glazed panels shall be clear tempered glass All lock cores shall be Black Must meet minimum Ansi and Bisma Standards, 2, JB; LI 003: Rooms EW-313, EW-314, EW-315 Quantity of 1 each of the following item per room: -36? X 36? X 24?d corner freestanding unit with removable full modesty -42?w X 24?d freestanding right return with BBF pedestal with removable full modesty -42?w X 24?d freestanding left return with FF pedestal with removable full modesty -Wall mounted 42?w overhead flipper cabinet with metal sides and door, Tack board and Task light -Wall mounted 36?w overhead flipper cabinet with metal sides and door, Tack board and Task light -36?w 5 high lateral file -Each room keyed alike, each room different Finishes for furniture: Panel frames, base, flipper door units, wall strips, pedestal units, file cabinets and desk unit vertical sections? metal finish shall be Charcoal Task lights shall be Black Desk horizontal work surface shall be Medium Cherry Edge banding around work surface shall be Charcoal Tack Board fabric shall be Shimmer Glass - Grade B Panel fabric shall be Iowa Rice Lake - Grade A Glazed panels shall be clear tempered glass All lock cores shall be Black Must meet minimum Ansi and Bisma Standards, 3, JB; LI 004: Room EW-312 Quantity of 1 each of the following item per room: -36? X 36? X 24?d corner freestanding unit with removable full modesty -42?w X 24?d freestanding right return with BBF pedestal with removable full modesty -42?w X 24?d freestanding bridge unit -72?w X 24?d freestanding credenza unit with left FF pedestal with removable full modesty -Wall mounted 42?w overhead flipper cabinet with metal sides and door, Tack board and Task light -Wall mounted 36?w overhead flipper cabinet with metal sides and door, Tack board and Task light -36?w 3 high lateral file -Keyed alike Finishes for furniture: Panel frames, base, flipper door units, wall strips, pedestal units, file cabinets and desk unit vertical sections? metal finish shall be Charcoal Task lights shall be Black Desk horizontal work surface shall be Medium Cherry Edge banding around work surface shall be Charcoal Tack Board fabric shall be Shimmer Glass - Grade B Panel fabric shall be Iowa Rice Lake - Grade A Glazed panels shall be clear tempered glass All lock cores shall be Black Must meet minimum Ansi and Bisma Standards, 1, JB; LI 005: Systems Furniture in Area EW-319 ? 14 workstations, 1 printer station, 1 file station Release of Info / Network Fee -Two runs of a total of 16 stations, top fed with power poles with requirements as follows -Each cube is 8?6? x 6?6? using stackable panels -A maximum combined stackable panel height of 65? -A minimum of 75% of panels shall be glazed stackable -Requirements of Qty. 1 Printer station -Minimum of 78? of linear work surface space, freestanding units with removable full modesties -78? of panel mounted overhead flipper cabinets with metal sides and door -Two Task lights mounted under overheads, One Tack board -One FF pedestal -Minimum of 3 duplex receptacles -Requirement of Qty. 1 File station -File station shall have Qty. 3 36?w 5 high lateral files -Minimum of 3 duplex receptacles -Requirement of each Qty. 14 workstations -36? X 36? X 24?d corner freestanding unit with removable full modesty -24?d returns on two sides, freestanding returns with removable full modesty -Room on one side for a guest chair with arms -2 pedestal units, one on each return, BBF and FF -Minimum of 150? of linear work surface space -2 panel mounted overhead flipper cabinets with metal sides and door, mounted on same side with a minimum of 78? linear storage space -Two Task lights mounted under overheads, One Tack board -Minimum of 3 duplex receptacles per workstation Finishes for furniture: Panel frames, base, flipper door units, wall strips, pedestal units, file cabinets and desk unit vertical sections? metal finish shall be Charcoal Task lights shall be Black Desk horizontal work surface shall be Medium Cherry Edge banding around work surface shall be Charcoal Tack Board fabric shall be Shimmer Glass - Grade B Panel fabric shall be Iowa Rice Lake - Grade A Glazed panels shall be clear tempered glass All lock cores shall be Black Must meet minimum Ansi and Bisma Standards, 16, JB; LI 006: Systems Furniture in Area EW-318A ? 8 workstations Non-VA Care -One run of 8 workstations, with top feed power poles -Each cube is 6?6? x 6?0? using stackable panels -A maximum combined stackable panel height of 65? -A minimum of 75% of panels shall be glazed stackable -Requirements of each Qty. 8 workstations -36? X 36? X 24?d corner freestanding unit with removable full modesty -24?d returns on two sides, freestanding returns with removable full modesty -2 pedestal units, one on each return, BBF and FF -Minimum of 150? of linear work surface space -2 panel mounted overhead flipper cabinets with metal sides and door, mounted on same side with a minimum of 78? linear storage space -Two Task lights mounted under overheads, One Tack board -Minimum of 3 duplex receptacles per workstation Finishes for furniture: Panel frames, base, flipper door units, wall strips, pedestal units, file cabinets and desk unit vertical sections? metal finish shall be Charcoal Task lights shall be Black Desk horizontal work surface shall be Medium Cherry Edge banding around work surface shall be Charcoal Tack Board fabric shall be Shimmer Glass - Grade B Panel fabric shall be Iowa Rice Lake - Grade A Glazed panels shall be clear tempered glass All lock cores shall be Black Must meet minimum Ansi and Bisma Standards, 8, JB; LI 007: Systems Furniture in Area EW-317 and EW-316A ? 9 workstations Scanning -A total of 9 workstations, with top feed power poles -Each cube is 7?0? x 7?0? using stackable panels -A maximum combined stackable panel height of 65? -A minimum of 75% of panels shall be glazed stackable -Requirements of each Qty. 9 workstations -36? X 36? X 24?d corner freestanding unit with removable full modesty -24?d returns on two sides, freestanding returns with removable full modesty -2 pedestal units, one on each return, BBF and FF -Minimum of 168? linear work surface space -2 panel mounted overhead flipper cabinets with metal sides and door, mounted on same side with a minimum of 84? linear storage space -Two Task lights mounted under overheads, One Tack board -Minimum of 3 duplex receptacles per workstation Finishes for furniture: Panel frames, base, flipper door units, wall strips, pedestal units, file cabinets and desk unit vertical sections? metal finish shall be Charcoal Task lights shall be Black Desk horizontal work surface shall be Medium Cherry Edge banding around work surface shall be Charcoal Tack Board fabric shall be Shimmer Glass - Grade B Panel fabric shall be Iowa Rice Lake - Grade A Glazed panels shall be clear tempered glass All lock cores shall be Black Must meet minimum Ansi and Bisma Standards, 9, JB; LI 008: Systems Furniture in Area EW-307 and CW-320 ? 6 workstations Schedule -One run of 5 workstations, with top feed power poles -One single workstation -Each cube is 6?0? x 6?0? using stackable panels -A maximum panel height of 65? -A minimum of 75% of panels shall be glazed stackable -Requirements of each Qty. 5 workstations -36? X 36? X 24?d corner freestanding unit with removable full modesty -24?d returns on two sides, freestanding returns with removable full modesty -2 pedestal units, one on each return, BBF and FF -Minimum of 144? linear work surface space -2 panel mounted overhead flipper cabinets with metal sides and door, mounted on same side with a minimum of 72? linear storage space -Two Task lights mounted under overheads, One Tack board -Minimum of 3 duplex receptacles per workstation Finishes for furniture: Panel frames, base, flipper door units, wall strips, pedestal units, file cabinets and desk unit vertical sections? metal finish shall be Charcoal Task lights shall be Black Desk horizontal work surface shall be Medium Cherry Edge banding around work surface shall be Charcoal Tack Board fabric shall be Shimmer Glass - Grade B Panel fabric shall be Iowa Rice Lake - Grade A Glazed panels shall be clear tempered glass All lock cores shall be Black Must meet minimum Ansi and Bisma Standards, 6, JB; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, VHA NCO 10 - 250 - Dayton, OH intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. VHA NCO 10 - 250 - Dayton, OH is taking this action in an effort to improve both seller access and awareness of requests and the agency's ability to gather multiple, completed, real-time bids.All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Sellers that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Sellers that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Sellers may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should Sellers require additional clarification, contact FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. In addition to any VHA buy terms entered in FedBid, the Seller (Bidder) has reviewed and acknowledges any attached solicitation documents, item details, delivery schedule, and/or instructions to Seller (collectively referred to as requirements), and agrees to all terms and conditions set forth in the solicitation documents. While additional support documentation (e.g. Seller Attachments) may be requested, pricing shall be entered as a 'bid' in the reverse auction - offline pricing is not an acceptable bid. At the conclusion of the reverse auction, if attached to the buy, the apparent winning bidder shall be required to complete the solicitation documents prior to award. Sellers certify that they are an Authorized Channel or Reseller as of the date of the submission of its Bid, and that they have the authorization required to support the product sale, product pricing, and product warranties in accordance with applicable manufacturer authorization requirements. Unless otherwise specified, Sellers warrant that the products are new and in their original packaging and the OEM warranties remain in full effect. The Sellers confirm to have sourced all products submitted in this Bid from the manufacturer or through manufacturer authorized channels only, in accordance with all applicable laws and the manufacturer?s current applicable policies at the time of purchase. If software is provided or included, Sellers shall, upon request, provide Buyers with a copy of the End User License Agreement. Sellers certify that all manufacturer software is licensed originally to the Buying organization as the original licensee authorized to use the software. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Sellers shall be registered in SAM within five business days of FedBid auction closing in order to be considered for award. This is a Best Value Procurement. This award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to Buyer on the basis of technical capability, past performance, delivery, and price. Technical capability is more important than past performance. Past performance is more important than delivery. Delivery is more important than price. All equivalent bidders must submit specs sheets or documentation that will allow for comparison between the requirement(s) and the bided item. Additionally, bidders may be required to provide an on-site demonstration of equipment capabilities. This solicitation is a non-set-aside requirement, however, the CO may use socioeconomic status as an evaulation factor.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/VA/DaVAMC552/DaVAMC552/VA250-13-Q-0611/listing.html)
- Place of Performance
- Address: Dayton, OH 45428
- Zip Code: 45428-9000
- Zip Code: 45428-9000
- Record
- SN03196195-W 20130921/130920000556-cd361652fe990e629443b3f4e3b4d906 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |