SOLICITATION NOTICE
20 -- Dockside repairs for Coast Guard Cutter CYPRESS - Draft Specification
- Notice Date
- 9/6/2013
- Notice Type
- Presolicitation
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC) Procurement Branch 2, 1301 Clay St., Suite 807N, Oakland, California, 94612-5249, United States
- ZIP Code
- 94612-5249
- Solicitation Number
- DOCKSIDE-CG-CYPRESS
- Archive Date
- 10/29/2013
- Point of Contact
- Andrew G. Jacobs, Phone: 5106375974
- E-Mail Address
-
Andrew.G.Jacobs@uscg.mil
(Andrew.G.Jacobs@uscg.mil)
- Small Business Set-Aside
- HUBZone
- Description
- Draft Specification The U.S. Coast Guard Surface Forces Logistics Center, contracting and procurement IBCT product line intends to issue a solicitation requesting proposals for dockside repairs for the U.S. Coast Guard Cutter CYPRESS (WLB 210) a 225 foot B Class cutter. The Coast Guard intends to conduct this procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Part 15, Contracting by Negotiation. This procurement will be issued as a HUBZone set aside. The NAICS code will be 336611 and the small business size standard will be less than 1000 employees. The solicitation will be issued as a best value request for proposal (RFP) approximately 12- 13 September 2013 with proposals due approximately 13 October 2013. Proposals will be evaluated using price and past performance as evaluation factors with past performance and price being considered of equal importance. The solicitation/RFP will be issued via the Federal Business Opportunity (FedBizOpps) website at http://www.fbo.gov/. A hard copy solicitation will not be issued. Contractors will need to monitor the FedBizOpps website for RFP/solicitation release and any subsequent amendments. All required dock side repairs will be at the cutter's home pier in Pensacola, FL. The performance period is anticipated to be from approximately 14 January 2014 - 12 March 2014. The current draft list of items for this requirement is listed below: ITEM DESCRIPTION WORK ITEM 1: Tanks (Potable Water), Clean and Inspect WORK ITEM 2: Main Diesel Engine (MDE) Exhaust Stack Uptakes, Clean WORK ITEM 3: Ship Service Diesel Generator Exhaust Piping, Commercial Clean WORK ITEM 4: Circuit Breakers (60 Hz), Inspect and Test WORK ITEM 5: Vent Ducts (Engine and Motor Room All), Commercial Cleaning WORK ITEM 6: Vent Ducts (Galley and Pantry Room All), Commercial Cleaning WORK ITEM 7: Vent Ducts (Laundry Exhaust), Commercial Cleaning WORK ITEM 8: Potable Water Pneumatic Tanks, Clean and Inspect WORK ITEM 9: Compressed Air Receivers (All), Clean, Inspect, and Hydro WORK ITEM 10: Hydraulic Chain Stoppers, Overhaul WORK ITEM 11: Twin Pivot Arm Davit, Level 2 Inspect and Repair WORK ITEM 12: Buoy and Cargo Handling Crane Wire Rope, Renew WORK ITEM 13: Grey Water Holding Tanks, Clean and Inspect WORK ITEM 14: Sewage Holding Tanks, Clean and Inspect WORK ITEM 15: Sewage Piping, Clean and Flush WORK ITEM 16: Scuttles, Upgrade WORK ITEM 17: Deck Covering (Interior Wet/Dry), Renew WORK ITEM 18: Hydraulic Steering Cooler, Install WORK ITEM 19: Hydraulic Buoy Chain Winch, Align WORK ITEM 20: SORS HPU Gauge Line Fittings, Renew WORK ITEM 21: Superstructure (Areas Under Gunwale), Preserve WORK ITEM 22: Sewage Holding Tank Washing Nozzle, Renew WORK ITEM 23: Potable Water Piping Insulation, Renew WORK ITEM 24: Potable-Water Transfer Pump Skid, Preserve WORK ITEM 25: Ventilation Systems, Overhaul WORK ITEM 26: Incinerator Fuel Oil Pipe, Renew WORK ITEM 27: Chilled Water System Insulation, Renew WORK ITEM 28: Bilges (Machinery Space) AMR Bilge, frames 82 through 87, preserve WORK ITEM 29: Thermographic Inspection WORK ITEM 30: 2 and ½ inch Potable Water Piping Insulation, Renew WORK ITEM 31: Ventilation Systems, Overhaul The draft specification for this project is posted with this pre-solicitation synopsis for review from interested parties. Drawings on CD-ROM will be free of charge to contractors upon request. The contact for drawings is Andrew Jacobs at 510-637-5974, or Andrew.G.Jacobs@uscg.mil. Certifications: All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. For further information or questions regarding this potential solicitation, contact Andrew Jacobs at 510-637-5974, or Andrew.G.Jacobs@uscg.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/VPLMLCP/DOCKSIDE-CG-CYPRESS/listing.html)
- Place of Performance
- Address: 211 South Avenue C, Suite C, Pensacola, Florida, 32508, United States
- Zip Code: 32508
- Zip Code: 32508
- Record
- SN03176996-W 20130908/130906235049-fcbd5dfb20ed961e9d0465bcd959fb3d (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |