SOLICITATION NOTICE
36 -- Rotary table and wireless tool setting probe system - (Draft)
- Notice Date
- 8/28/2013
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333515
— Cutting Tool and Machine Tool Accessory Manufacturing
- Contracting Office
- General Services Administration, Federal Acquisition Service (FAS), FMHAC & HSOC, 1500 East Bannister Road, Kansas City, Missouri, 64131, United States
- ZIP Code
- 64131
- Solicitation Number
- 6FLS-A7-Rotary_table
- Archive Date
- 9/21/2013
- Point of Contact
- Roger D Thomas, Phone: 816-823-3399
- E-Mail Address
-
roger.thomas@gsa.gov
(roger.thomas@gsa.gov)
- Small Business Set-Aside
- N/A
- Description
- Additional RFQ information for rotary table and probe system. Salient Characteristics for Wireless tool-setting probe system and Servo Rotary Table or equal: - Both items must be compatible with Haas TM-2P CNC Mill - Function with software applicable to Part Number SIGMA1 - Rotary Table Spindle (Part Number HRT160SP/IUID_TAG or equal) must have: o Required to accept HAAS 4 th axis drive for full 4 th axis operation o 6 inch top reversible, 3 jaw chuck (Part Number LC6-B or equal) o 150 ft-lb torque o No more than.0005 runout o Speed of.001 to 130 degree/sec o Brake torque @ 100 psi of 100 ft-lb - Rotary Table Indexing (Part Number HRT160SP/IUID_TAG or equal) must have: o +/- 15 arc-sec accuracy o 10 arc-sec repeatability o.001 degree resolution o 4.7” worm gear diameter - Rotary Table Motor (Part Number HRT160SP/IUID_TAG or equal) must have: o 63:1 gear ratio (worm gear) o 2:1 Timing belt - Rotary Table Operating (Part Number HRT160SP/IUID_TAG or equal) Specifications: o Duty Cycle full/low speed = 50%/100% o 120 volt +/- 10% @ 15 amp o Max air pressure 120 psi o Coolant resistant o Direct connect to Haas with compatible programming o Variable feedrates o Linear, arc & spiral milling - Wireless Intuitive Probing System (Part Number WIPS-R or equal) must have: o Compatible with HAAS intuitive probing system o Wireless tool-setting probe o Wireless work offset probe o Include macros, spindle orientation o Coordinate rotation and scaling o Compatible/interchangeable with currently Renishaw equipment in use on other Haas machines - SEE ATTACHMENT FOR SHIPPING INFORMATION.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/a93d18935a81e1068534b23409080d6e)
- Record
- SN03165502-W 20130830/130828235623-a93d18935a81e1068534b23409080d6e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |