SOLICITATION NOTICE
47 -- Hydraulic Pipes and Tubes - W911XK-13-T-0072
- Notice Date
- 8/16/2013
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 331210
— Iron and Steel Pipe and Tube Manufacturing from Purchased Steel
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, USACE District, Detroit, 477 Michigan Avenue, Detroit, Michigan, 48226, United States
- ZIP Code
- 48226
- Solicitation Number
- W911XK-13-T-0072
- Archive Date
- 9/7/2013
- Point of Contact
- L. Will Smith, Phone: (313) 226-2797, Thomas McKay,
- E-Mail Address
-
lloyd.w.smith@usace.army.mil, LRE-Quotes@usace.army.mil
(lloyd.w.smith@usace.army.mil, LRE-Quotes@usace.army.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Hydraulic Pipes and Tubes SCOPE OF WORK AND TECHNICAL SPECIFICATION FOR POE LOCK HYDRAULIC SYSTEM PIPE AND TUBE SUPPLY CONTRACT PROJECT SUMMARY: The Army Corps of Engineers is installing a new hydraulic system to operate Poe Lock machinery at the Soo Area Office, Sault Ste Marie, MI. Requirements for the procurement and delivery of pipe and tube required for this project are detailed within this scope of work and technical specification. The delivery address for these materials is St. Marys Falls Canal, 119 East Water Street, Sault Sainte Marie, MI 49783. All items must be received within 14 days of award of contract. PART 1 GENERAL 1.1 REFERENCES The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only. ASTM INTERNATIONAL (ASTM) ASTM A312 (2013) Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes ASTM A269 (2010) Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service 1.2 UNIT PRICES Payment will be made for costs associated with procuring and delivering materials required by these specifications unless otherwise specified. 1.3 SUBMITTALS Government approval is required for submittals with a "G" designation; submittals not having a "G" designation are for information only. When used, a designation following the "G" designation identifies the office that will review the submittal for the Government. The following shall be submitted in accordance with Section 01 33 00 SUBMITTAL PROCEDURES: 1.3.1 Manufacturer Test Results and Certifications Contractor shall submit certification that the pipe or tube complies with the applicable ASTM specification (G) Contractor shall submit the number and length of any short lengths required to fulfill the quantities specified in Part 2 of this specification PART 2 PRODUCTS 2.1 MATERIAL 2.1.1 Pipe Part number per ASTM A312 Section 18.1.4: ASTM A312/A312M PIPE, TP304, NPS 3, SCH 80, SMLS Description: ASTM A312/A312M PIPE, TYPE 304 STAINLESS STEEL, 3" NPS, SCHEDULE 80, SEAMLESS Quantity: Nine hundred (900) lineal feet Individual Pipe Length: 20' random cut preferred. Individual pipe lengths shall meet the requirements of ASTM A312 Section 13. Short lengths shall be subject to Government approval. Part number per ASTM A312 Section 18.1.4: ASTM A312/A312M PIPE, TP304, NPS 1, SCH 80, SMLS Description: ASTM A312/A312M PIPE, TYPE 304 STAINLESS STEEL, 1" NPS, SCHEDULE 80, SEAMLESS Quantity: Forty (40) lineal feet Individual Pipe Length: 20' random cut preferred. Individual pipe lengths shall meet the requirements of ASTM A312 Section 13. Short lengths shall be subject to Government approval. 2.1.2 Tube Description: ASTM A269 SEAMLESS TUBE TP 316 STAINLESS STEEL 1.25" OD X.109" WALL Quantity: Sixty (60) total lineal feet Individual Tube Length: 20' random cut Description: ASTM A269 SEAMLESS TUBE TP 316 STAINLESS STEEL 1.00" OD X.083" WALL Quantity: Forty (40) total lineal feet Individual Tube Length: 20' random cut Description: ASTM A269 SEAMLESS TUBE TP 316 STAINLESS STEEL.750" OD X.065" WALL Quantity: Sixty (60) total lineal feet Individual Tube Length: 20' random cut 2.2 TESTS, INSPECTIONS, AND VERIFICATIONS The Contractor shall submit test results performed and certified by the pipe manufacturer, or have required material tests and analyses performed and certified by an approved laboratory, to demonstrate that materials are in conformity with the specifications. These tests and analyses shall be performed and certified at the Contractor's expense. Tests, inspections, and verifications shall conform to the requirements of the particular sections of these specifications for the respective items of work unless otherwise specified or authorized. The Contractor shall furnish specimens and samples for additional independent tests and analyses upon request by the Contracting Officer. Specimens and samples shall be properly labeled and prepared for shipment. 2.2.1 Nondestructive Testing When doubt exists as to the soundness of any material part such part may be subjected to any form of nondestructive testing determined by the Contracting Officer. This may include ultrasonic, magnetic particle, dye penetrant, x-ray, gamma ray or any other test that will thoroughly investigate the part in question. The cost of such investigation will be borne by the Government. Any defects will be cause for rejection and rejected parts shall be replaced and retested at the Contractor's expense. PART 3 EXECUTION 3.1 PROTECTION OF FINISHED WORK Machined shall be thoroughly cleaned of foreign matter. All finished surfaces shall be protected by suitable means. 3.2 WORKMANSHIP Workmanship shall be of the highest grade and in accordance with the best modern practices to conform with the specifications for the item of work being furnished.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA35/W911XK-13-T-0072/listing.html)
- Place of Performance
- Address: St. Marys Falls Canal, 119 East Water Street, Sault Sainte Marie, Michigan, 49783, United States
- Zip Code: 49783
- Zip Code: 49783
- Record
- SN03152675-W 20130818/130816235354-4fa277735ba70e5312d8e8e1f6999b5a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |