SOLICITATION NOTICE
71 -- Customized Workbenches, Worktables, and Bins RFQ
- Notice Date
- 8/15/2013
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 337214
— Office Furniture (except Wood) Manufacturing
- Contracting Office
- US Army Medical Research Acquisition Activity, ATTN: MCMR-AAA, 820 Chandler Street, Frederick, MD 21702-5014
- ZIP Code
- 21702-5014
- Solicitation Number
- W81XWH-13-T-0317
- Response Due
- 8/26/2013
- Archive Date
- 10/14/2013
- Point of Contact
- Roman Laterza, 3016199208
- E-Mail Address
-
US Army Medical Research Acquisition Activity
(roman.e.laterza.civ@mail.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. OBJECTIVE The U.S. Army Aeromedical Research Laboratory (USAARL) has a need for three (3) customized Workbenches, two (2) customized Worktables, and ninety (90) bins. The brand name in this solicitation is FormaSpace. All brand name or equal proposals shall satisfy and comply with all the Minimal Essential Characteristics (MEC's) which are provided in the Statement of Need (SON). The supplies recommended by the contractor will be evaluated in how they satisfy all of the Minimal Essential Characteristics listed below. All quotations submitted with equivalent supplies shall provide a matrix that directly point back to all MEC's. MINIMAL ESSENTIAL CHARACTERISTICS (MEC) 1. One (1) Workbench with the following characteristics is required (Brand Name or Equal to FormaSpace CLINs 1-6): Required dimensions: 78 quote mark W x 36 quote mark D x 36 quote mark H Frame material requirement: Steel. Required load capacity of 1000-pounds. Wire management capabilities required. Ability to level Work surface requirements: Black in color - not glossy Easy to clean Durable (hard material) Non-absorbent Moisture resistant Heat resistant Chemically resistant Two (2) shelves above the work surface are required: Each shelf must be 15-inches deep, adjustable height; load capacity a minimum 200lbs; color: black. oThe bottom shelf must have a minimum of a 3-foot light mounted to the underside. A bin rail above the work surface and the length of the work surface is required: Must be capable of holding containers of various sizes for storage. Two (2) 5-drawer tool boxes with a lock mechanism are required below the work surface; one (1) on the right side and one (1) on the left side: Each tool box must have: oThree (3) single depth drawers; minimum of 3-inch height, maximum of 4-inch height oTwo (2) double depth drawers; minimum of 5-inch height, maximum of 8-inch height Each tool box must have a total width between 20- and 30-inches. Each tool box must have a total depth between 20- and 30-inches. Each tool box must have a total height between 26- and 34-inches. 2. One (1) Workbench with the following characteristics is required (Brand Name or Equal to FormaSpace CLINs 7-13): Required dimensions: 78 quote mark W x 36 quote mark D x 36 quote mark H Frame material requirement: Steel. Required load capacity of 1000-pounds. Wire management capabilities required. Ability to level Work surface requirements: Black in color - not glossy Easy to clean Durable (hard material) Non-absorbent Moisture resistant Heat resistant Chemically resistant Two (2) shelves above the work surface are required: Each shelf must be 15-inches deep, adjustable height; load capacity a minimum 200lbs; color: black. The bottom shelf must have a minimum of a 3-foot light mounted to the underside. A bin rail above the work surface and the length of the work surface is required: Must be capable of holding containers of various sizes for storage. One (1) 5-drawer tool box with a lock mechanism is required below the work surface on the left side: The tool box must have: oThree (3) single depth drawers; minimum of 3-inch height, maximum of 4-inch height oTwo (2) double depth drawers; minimum of 5-inch height, maximum of 8-inch height The tool box must have a total width between 20- and 30-inches. The tool box must have a total depth between 20- and 30-inches. The tool box must have a total height between 26- and 34-inches. One (1) set of three (3) black vertically stacked drawers is required below the work surface on the right side: Each drawer must be 24-inches wide and 30-inches deep. Each drawer must be capable of partitioning. 3. One (1) Workbench with the following characteristics is required (Brand Name or Equal to FormaSpace CLINs 14-20): Required dimensions: 78 quote mark W x 36 quote mark D x 36 quote mark H Frame material requirement: Steel. Required load capacity of 1000-pounds. Wire management capabilities required. Ability to level Work surface requirements: Black in color - not glossy Easy to clean Durable (hard material) Non-absorbent Moisture resistant Heat resistant Chemically resistant Two (2) shelves above the work surface are required: Each shelf must be 15-inches deep, adjustable height; load capacity a minimum 200lbs; color: black. The bottom shelf must have a minimum of a 3-foot light mounted to the underside. A bin rail above the work surface and the length of the work surface is required: Must be capable of holding containers of various sizes for storage. One (1) set of three (3) black vertically stacked drawers is required below the work surface on the left side: Each drawer must be a 24-inches wide and 30-inches deep. Each drawer must be capable of partitioning. One (1) black shelf is required below the work surface on the right: Shelf must be 48-inches wide and 18-inches deep. 4. One (1) Work table with the following characteristics is required (Brand Name or Equal to FormaSpace CLINs 21-23): Required dimensions: 72 quote mark W x 48 quote mark D x 30 quote mark H-42 quote mark H/adjustable Height adjustment is required to be electronic (not manual) with a 12-inch range and a load capacity of a minimum of 1000-pounds. Frame material requirement: Steel. Required load capacity of 1000-pounds. Full swivel, locking casters required. Work surface requirements: Black in color - not glossy Easy to clean Durable (hard material) Non-absorbent Moisture resistant Heat resistant Chemically resistant One (1) black shelf is required below work surface: The shelf must be the width of the table (72-inches) and half the depth (24-inches). 5. One (1) Work table with the following characteristics is required (Brand Name or Equal to FormaSpace CLINs 24-26): Required dimensions: 72 quote mark W x 48 quote mark D x 42 quote mark H Frame material requirement: Steel. Required load capacity of 1000-pounds. Full swivel, locking casters required. Work surface requirements: Black in color - not glossy Easy to clean Durable (hard material) Non-absorbent Moisture resistant Heat resistant Chemically resistant Two (2) power strips below the work surface is required: Power requirements: UL approved power strips with a minimum of 4 outlets needed below work surface along the 48 quote mark D dimension on the left and right sides. One (1) black shelf is required below the work surface: The shelf must be the width of the table (72-inches) and the depth of the table (48-inches). 6. Ninety (90) Bins that are compatible with the bin rail above work surfaces on the above workbenches are required (Brand Name or Equal to FormaSpace CLIN 27): The quantity, dimension, and color required are summarized in the below table. Required Quantity Width (inches)Depth (inches)Height (inches)Color 104 1/85 3/83Blue 104 1/85 3/83Green 104 1/85 3/83Yellow 104 1/87 3/83Blue 104 1/87 3/83Green 104 1/87 3/83Yellow 101110 7/85Blue 101110 7/85Green 101110 7/85Yellow Quotations shall be prepared in accordance with FAR 52.212-1. All quotations shall be evaluated in accordance with FAR 52.212-2. Due to the difficulties in receipt of mail through normal postal services, proposals shall be sent via e-mail to the Point of Contact (POC) for this solicitation, Roman Laterza, at roman.e.laterza.civ@mail.mil. The Offeror is responsible for ensuring receipt by the POC. Please refer to the attached W81XWH-13-T-0317. Responses to this RFQ are due 26 August, 2013 1400 EST.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/USAMRAA/DAMD17/W81XWH-13-T-0317/listing.html)
- Place of Performance
- Address: US Army Medical Research Acquisition Activity ATTN: MCMR-AAA-MA, 820 Chandler Street Frederick MD
- Zip Code: 21702-5014
- Zip Code: 21702-5014
- Record
- SN03151276-W 20130817/130816000430-4b484ac514afe1a7bb42d6930f991e3f (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |