SOLICITATION NOTICE
61 -- 3-PHASE PORTABLE POWER
- Notice Date
- 7/30/2013
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334515
— Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
- Contracting Office
- Department of Commerce, National Institute of Standards and Technology (NIST), Acquisition Management Division, 100 Bureau Drive, Building 301, Room B129, Mail Stop 1640, Gaithersburg, Maryland, 20899-1640, United States
- ZIP Code
- 20899-1640
- Solicitation Number
- SB1341-13-RQ-0686
- Archive Date
- 8/27/2013
- Point of Contact
- Lynda M Roark, Phone: 3019753725, Todd D Hill, Phone: 301-975-8802
- E-Mail Address
-
Lynda.Roark@nist.gov, todd.hill@nist.gov
(Lynda.Roark@nist.gov, todd.hill@nist.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. THE SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION PROCEDURES. This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-68. The associated North American Industrial Classification System (NAICS) code for this procurement is 334515 with a small business size standard of 500 employees. This procurement is being set aside 100 percent for small businesses. In accordance with the non-manufacturer rule, the contractor shall be a small business under the applicable size standard and shall provide either its own product or that of another domestic small business manufacturing or processing concern. See FAR 19.102(f) for additional information Background: The National Institute of Standards and Technology (NIST), Physical Measurement Laboratory Quantum Measurement Division (QMD) has a requirement for a 3-Phase Portable Power and Energy Standard for the power lab at NIST. The Quantum Measurement Division (QMD) provides measurement and data support for a broad range of national needs, conducts metrology research enabling more accurate determination of SI units and fundamental constants, performs basic electrical, mass, force and torque calibrations, distributes its findings widely and effectively, and maintains an active schedule of services, partnerships and collaborations with industry, academe and government. In addition, the division's work contributes directly to the development and global dissemination of constantly improved international standards. Through the Committee on Data for Science and Technology (CODATA, an interdisciplinary unit of the Scientific Committee of the International Council for Science) and other avenues, QMD conducts basic research to support CODATA, and to develop measurement science for future technologies in the areas of quantum information science (a working quantum computer is one near-term goal), quantum-based measurements, and quantum materials and post-CMOS technology. The strategy of the Quantum Measurement Division is to develop and apply quantum physics research methods, including the interaction between atoms and electromagnetic fields, to achieve fundamental advances in measurement science - some at the quantum limit - relevant to industry and the technical community, and to produce and critically compile physical reference data. 1352.215-72 Inquiries (Apr 2010) Offerors must submit all questions concerning this solicitation in writing to Lynda.Roark@nist.gov. Questions should be received no later than 10 calendar days after the issuance date of this solicitation. Any responses to questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, only the question responses included in the amendment to the solicitation will govern performance of the contract. (End of Provision) Requirement: Line Item 0001, a quantity of one (1), 3-Phase Portable Power and Energy Standard, meeting or exceeding the following minimum specifications: 1. Must have measurement functions of Whrs, Volts, Amps, VARhrs, VAhrs, Qhrs, Watts, VARs, VA, Phase Angle, Power Factor and Frequency; 2. Must have voltage ranges of 60 to 600 volts; 3. Must have current ranges of 0.025 to 200 amps; 4. Must have frequency ranges of 45 to 65 hertz; 5. Must have pulse output proportional to input measurement function with a minimum pulse width of 180 nS; 6. Must have serial interface for simultaneous output of all measurement functions; 7. Must have energy measurement uncertainty of 0.01 percent for all measurement ranges; 8. Harmonic waveform measurement and analysis capability of 60th harmonic of the fundamental frequency with built in analysis software. Warranty: The contractors commercial warranty shall commence upon receipt and acceptance by the Government. Delivery: Delivery shall be completed in accordance with the standard commercial delivery timeframe. Due Date for Quotations: All quotations shall be sent to the National Institute of Standards and Technology, Acquisition Management Division, Attn: Lynda Roark, 100 Bureau Drive, Stop 1640, Gaithersburg, MD 20899-1640. Email: Lynda.Roark@Nist.gov All offerors shall ensure the RFQ number is visible on the outermost packaging. Submission must be received not later than 2:30 p.m. local time on August 12, 2013. FAX quotations shall not be accepted. E-mail quotations shall be accepted. Offerors' quotations shall not be deemed received by the Government until the quotation is entered into the e-mail address inbox set forth above. Because of heightened security, FED-EX, UPS, or similar delivery methods are the preferred method of delivery of quotes. If quotes are hand delivered, delivery shall be made on the actual due date through Gate A, and a 48 hour (excluding weekends and holidays) prior notice shall be provided to Lynda Roark, Contract Specialist on 301-975-3725. NIST is not responsible for late delivery due to the added security measures. In addition, quoters who do not provide 48-hour notification in order to coordinate entrance to the NIST campus shall assume the risk of not being able to deliver quotes on time. ADDENDUM TO 52.212-1, QUOTATION PREPARATION INSTRUCTIONS (REQUIRED SUBMISSIONS) 1) Price Quotation: The offeror shall submit an original and four copies of the completed price schedule (if the quotation is submitted electronically, additional copies are not required). The offeror shall propose a firm-fixed-price for each CLIN. Price quotations shall remain valid for a period of 90 days from the date quotations are due. 2). Technical Quotation: The offeror shall submit an original and four copies of the technical quotation. If the quotation is submitted electronically, additional copies are not required. The technical quotation shall address the following: Technical Capability: The offeror shall submit a technical description or product literature for the equipment it is proposing, which clearly identifies the manufacturer, make and model. The offeror must demonstrate that its proposed equipment meets or exceeds each minimum requirement described in the statement of work by providing a citation to the relevant section of its technical description or product literature. If applicable, evidence that the Offeror is authorized by the original equipment manufacturer to provide the item(s) in the quotation should be included. 3) Acceptance of Terms and Conditions (Addendum to FAR 52.212-1 (b)(11)): This is an open-market solicitation for equipment as defined herein. The Government intends to award a Purchase Order as a result of this solicitation that will include the terms and conditions that are set forth herein. In order to facilitate the award process, ALL quotes shall include one of the following statements: "The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition." OR "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following: Offeror shall list exception(s) and rationale for the exception(s) Please note that this procurement is not being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If an offeror submits a quotation based upon an FSS or GWAC contract, the Government will accept the quoted price. However, the terms and conditions stated herein will be included in any resultant Purchase Order, not the terms and conditions of the offeror's FSS or GWAC contract, and the statement required above shall be included in the quotation. Evaluation Factors: Award shall be made to the offeror whose quotation meets the minimum requirements and is lowest priced. The Government will evaluate quotations based on the following evaluation criteria: 1) Technical Capability and Price. 1. Technical Capability: No prototypes, demonstration models, used or refurbished instruments will be considered. Evaluation of technical capability shall be based on the information provided in the quotation. NIST will evaluate whether the offeror has demonstrated that its proposed equipment meets or exceeds all minimum requirements. Quotations that do not demonstrate the proposed equipment meets all requirements will not be considered further for award. If an offeror does not indicate whether its proposed equipment meets a certain minimum requirement, NIST will determine that it does not. 2. Price The price will be evaluated for realism and reasonableness. The full text of a FAR provision or clause may be accessed electronically at http://acquisition.gov/comp/far/index.html. The following provisions apply to this acquisition: 52.212-1 Instructions to Offerors-Commercial Items; 52.212-3 Offerors Representations and Certifications- Commercial Items. 1352.233-70 Agency Protests 1352.233-71 GAO and Court of Federal Claims Protest Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction Under Any Federal Law (Class Deviation) (March 2012) (1) In accordance with Sections 543 and 544 of Public Law 112-55 Commerce, Justice, Science, and Related Agencies Appropriations Act 2012, Title V (General Provisions) none of the funds made available by that Act may be used to enter into a contract with any corporation that- (a) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government. (b) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government. (2) The Offeror represents that, as of the date of this offer- (a) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months. (b) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreements with the authority responsible for collecting the tax liability. (End of provision) Offerors must complete annual representations and certifications on-line at www.sam.gov in accordance with FAR 52.212-3 Offerors Representations and Certifications- Commercial Items. If paragraph (j) of the provision is applicable, a written submission is required. The following clauses apply to this acquisition: 52.212-4 Contract Terms and Conditions-Commercial Items; 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items including subparagraphs: 52.204-10, Reporting Executive compensation and First-Tier Subcontract Awards (Jul 2010); 52.209-6, Protecting the Government' Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Dec 2010) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations 52.219-6, Notice of Total Small Business Aside (June 2003) 52.219-28, Post-Award Small Business Program Re-Representation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.223-18, Contractor Policy to Ban Text Messaging While Driving; 52.225-3, Buy American Act-Free Trade Agreements-Israeli Trade Act; 52.225-13 Restriction on Certain Foreign Purchases (E.O. 12722, 12724, 13059, 13067, 13121, and 13129; and 52.232-33, Payment by Electronic Funds Transfer--Central Contractor Registration; and Department of Commerce Agency-Level Protest Procedures Level above the Contracting Officer is also incorporated. It can be downloaded at www.nist.gov/admin/od/contract/agency.htm. 52.247-34, FOB Destination 52.232-99 -- Providing Accelerated Payment to Small Business Subcontractors (DEVIATION) 52.204-99 System for Award Management Registration (Class Deviation from 52.204-7) (September 2012) (DEVIATION) (a) Definitions. As used in this clause- "Central Contractor Registration (CCR) database" means the primary Government repository for Contractor information required for the conduct of business with the Government. "Commercial and Government Entity (CAGE) code" means- (1) A code assigned by the Defense Logistics Agency (DLA) Logistics Information Service to identify a commercial or Government entity; or (2) A code assigned by a member of the North Atlantic Treaty Organization that DLA records and maintains in the CAGE master file. This type of code is known as an "NCAGE code." "Data Universal Numbering System (DUNS) number" means the 9-digit number assigned by Dun and Bradstreet, Inc. (D&B) to identify unique business entities. "Data Universal Numbering System+4 (DUNS+4) number" means the DUNS number means the number assigned by D&B plus a 4-character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.) This 4-character suffix may be assigned at the discretion of the business concern to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see the FAR at Subpart 32.11) for the same concern. "Registered in the SAM database" means that- (1) The Contractor has entered all mandatory information, including the DUNS number or the DUNS+4 number, into the SAM database; (2) The Contractor's CAGE code is in the SAM database; and (3) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification Number (TIN) with the Internal Revenue Service (IRS), and has marked the record "Active". The Contractor will be required to provide consent for TIN validation to the Government as a part of the SAM registration process. "System for Award Management (SAM)" means the primary Government repository for prospective federal awardee information and the centralized Government system for certain contracting, grants, and other assistance related processes. It includes- (1) Data collected from prospective federal awardees required for the conduct of business with the Government; (2) Prospective contractor submitted annual representations and certifications in accordance with FAR Subpart 4.12; and (3) The list of all parties suspended, proposed for debarment, debarred, declared ineligible, or excluded or disqualified under the nonprocurement common rule by agencies, Government corporations, or by the Government Accountability Office. (b)(1) The Contractor shall be registered in the SAM database prior to submitting an invoice and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation. (2) The SAM registration shall be for the same name and address identified on the contract, with its associated CAGE code and DUNS or DUNS+4. (3) If indicated by the Government during performance, registration in an alternate system may be required in lieu of SAM. (c) If the Contractor does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one. (1) A Contractor may obtain a DUNS number- (i) Via the internet at http://fedgov.dnb.com/webform or if the offeror does not have internet access, it may call Dun and Bradstreet at 1-866-705-5711 if located within the United States; or (ii) If located outside the United States, by contacting the local Dun and Bradstreet office. The offeror should indicate that it is an offeror for a U.S. Government contract when contacting the local Dun and Bradstreet office. (2) The Contractor should be prepared to provide the following information: (i) Company legal business name. (ii) Tradestyle, doing business, or other name by which your entity is commonly recognized. (iii) Company physical street address, city, state and Zip Code. (iv) Company mailing address, city, state and Zip Code (if separate from physical). (v) Company telephone number. (vi) Date the company was started. (vii) Number of employees at your location. (viii) Chief executive officer/key manager. (ix) Line of business (industry). (x) Company Headquarters name and address (reporting relationship within your entity). (d) Reserved. (e) Processing time, for registration in SAM, which normally takes five business days, should be taken into consideration when registering. Contractors who are not registered should consider applying for registration at least two weeks prior to invoicing. (f) The Contractor is responsible for the accuracy and completeness of the data within the SAM database, and for any liability resulting from the Government's reliance on inaccurate or incomplete data. To remain registered in the SAM database after the initial registration, the Contractor is required to review and update on an annual basis from the date of initial registration or subsequent updates its information in the SAM database to ensure it is current, accurate and complete. Updating information in the SAM does not alter the terms and conditions of this contract and is not a substitute for a properly executed contractual document. (g)(1)(i) If a Contractor has legally changed its business name, "doing business as" name, or division name (whichever is shown on the contract), or has transferred the assets used in performing the contract, but has not completed the necessary requirements regarding novation and change-of-name agreements in Subpart 42.12, the Contractor shall provide the responsible Contracting Officer sufficient documentation to support the legally changed name of its intention to: (A) Change the name in the SAM database; (B) Comply with the requirements of Subpart 42.12 of the FAR; and (C) Agree in writing to the timeline and procedures specified by the responsible Contracting Officer. (ii) If the Contractor fails to comply with the requirements of paragraph (g)(1)(i) of this clause, or fails to perform the agreement at paragraph (g)(1)(i)(C) of this clause, and, in the absence of a properly executed novation or change-of-name agreement, the SAM information that shows the Contractor to be other than the Contractor indicated in the contract will be considered to be incorrect information within the meaning of the "Suspension of Payment" paragraph of the electronic funds transfer (EFT) clause of this contract. (2) The Contractor shall not change the name or address for EFT payments or manual payments, as appropriate, in the SAM record to reflect an assignee for the purpose of assignment of claims (see FAR Subpart 32.8, Assignment of Claims). Assignees shall be separately registered in the SAM database. Information provided to the Contractor's SAM record that indicates payments, including those made by EFT, to an ultimate recipient other than that Contractor will be considered to be incorrect information within the meaning of the "Suspension of payment" paragraph of the EFT clause of this contract. (h) Contractors may obtain information on registration and annual confirmation requirements via the SAM accessed through https://www.acquisition.gov or by calling 1-866-606-8220 or 334-206-7828 for international calls. (End of Clause) 1352.201-70: Contracting Officers Authority; 1352.209-73: Compliance with Laws; 1352.209-74: Organization Conflict of Interest; 1352-246-70: Place of Acceptance
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOC/NIST/AcAsD/SB1341-13-RQ-0686/listing.html)
- Place of Performance
- Address: 100 Bureau Drive, Gaithersburg, Maryland, 20899, United States
- Zip Code: 20899
- Zip Code: 20899
- Record
- SN03131664-W 20130801/130730235849-a94ed3c2271fbbe773de5114a729279c (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |