SOLICITATION NOTICE
59 -- TMDE Requirement
- Notice Date
- 7/1/2013
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- 2133 Cushing St., Bldg. 61801, Fort Huachuca, AZ 85613
- ZIP Code
- 85613
- Solicitation Number
- W91RUS-13-T-0278
- Response Due
- 7/8/2013
- Archive Date
- 1/4/2014
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- N/A
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W91RUS-13-T-0278 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-66. The associated North American Industrial Classification System (NAICS) code for this procurement is 335999 with a small business size standard of 500.00 employees.This requirement is unrestricted and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2013-07-08 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be in the Place of Performance. The APG - Huachuca Installation requires the following items, Brand Name or Equal, to the following: LI 001: Biddle MJI59 Part # 212159 Salient Characteristics for Biddle MJ159 Ohmmeter A portable, self-contained tester used to test the insulation of electrical circuits. It should have the following characteristics. -Insulation Resistance: 0.1 Ohm - 2000 Ohm -Nominal Test Voltages of 100 V, 250 V, 500 V, 1000 V -Open circuit Test voltage: 3 V ?0.2 V -Powered by a low voltage brushless a.c. generator with a Cranking speed between 130 rpm and 170 rpm -Meets the safety requirement for double insulation to IEC 1010-1(1995), EN 61010 (1995) to installation Category II, 300 V phase to earth (ground), 600 V installation Category I -Sixe is approximately 5.H x 4 W x 7 L in + 2 inches -Weighs less than 3 lbs -To reduce additional shipping support costs and defer maintenance availability, manufacturer MUST have calibration and maintenance support in all the following countries: United States, Korea, Japan, Australia, and Germany. Physical address of calibration and maintenance support centers is required. Brand Name or Equal, 1, EA; LI 002: Ideal Ind LanTEK II-350 Part # 33-991 Salient Characteristics for Ideal Industries LanTEK II 350 Cable certifier A portable, tester used to test and certify copper communication cabling. It should have the following characteristics: -Handset Dimensions Height/Width/Depth: 10in/5in/2in plus or minus 2 inches -Handset weight w/ battery Display: under 3lbs/ Remote: under 3lbs -Battery Lithium ion, 12V DC adapter; Typical operating time: 18 hours Input -4 to 5 in wide screen TFT -Adapter ports: 168 pin ultra low crosstalk, mini-USB device port, USB host port, four pin serial port -Frequency range 1-350MHz -Memory Non-volatile flash, storage capacity for 1700 TIA-Cat 6 tests with graphs. Tests can be copied to USB flash drive, up to 64GB. -Length measurement 0-2000 ft.; -Supported cable types TIA/EIA Category 3, 4, 5, 5E, 6 and 6A: 100O ISO/IEC Class C, D, E, EA, F, FA: 100O Cat 6/6A Class E/EA RJ-45 permanent link adapters: shielded and un-shielded cable, - -Supported connectors GG45, ARJ45, TERA, EC7 (MMCPRO3000), Coax 50-75O (BNC connector), M12 industrial -Tone generator Integrated into display and remote handset, compatible with standard analog inductive probes, selectable tone (high/low/warble) 500/600 Hz, selectable pin output. Supports multiple languages -To reduce additional shipping support costs and defer maintenance availability, manufacturer MUST have calibration and maintenance support in all the following countries: United States, Korea, Japan, Australia, and Germany. Physical address of calibration and maintenance support centers is required. Brand Name or Equal, 8, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, APG - Huachuca Installation intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. APG - Huachuca Installation is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. It is also required any contractor doing business with the government under contract be registered in the System for Award Management (SAM) website url: https://www.sam.gov/portal/public/SAM/ QUOTES/BIDS are to be submitted on FedBid ONLY or they will not be accepted.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/e2de5c9dd0dc3d70ee03b38d947a0b9a)
- Place of Performance
- Address: See Place of Performance.
- Zip Code: -
- Record
- SN03103979-W 20130703/130701234312-e2de5c9dd0dc3d70ee03b38d947a0b9a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |