SOLICITATION NOTICE
J -- Maintenance, repair & rebuilding of equipment
- Notice Date
- 6/18/2013
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 811211
— Consumer Electronics Repair and Maintenance
- Contracting Office
- Department of the Navy, United States Marine Corps, Marine Corps Base Camp Lejeune - RCO, PO Box 8368, MCB Camp Lejeune, North Carolina, 28547-8368
- ZIP Code
- 28547-8368
- Solicitation Number
- M6700113Q2006
- Archive Date
- 8/3/2013
- Point of Contact
- Howard D. Bouldin, Phone: 2296396250
- E-Mail Address
-
howard.bouldin@usmc.mil
(howard.bouldin@usmc.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined solicitation/synopsis for commercialk p[roducts and services prepared in accordance with FAR 16.603. The Marine Corps Logistics Base, Contracts Dept. Albany, GA has a requirement to upgrade an Audio Video System/Video Teleconferencing System, which will include all necessary products, materials and installation services. This will be a Total Small Business Aside. All interested vendors should email their quotes to Howard.Boudlin@usmc.mil not later than July 19, 2013. You must include all contact information, CAGE Code, Tax identification Number and best delivery schedule with your quote. Please address any questions or concerns via email. 1. NSN: N/A 2. DESCRIPTION: The contractor shall provide all labor and materials for successful AV/VTC (Audio Visual/Video Teleconferencing) installation for both classified and unclassified, point-to-point, and multipoint VTC capability, utilizing ISDN and IP-based classified and unclassified networks/phone networks. Installation shall be accomplished at Building 3500, Wing 400, Room 403. The contractor shall perform an on-site survey to confirm all work layouts, equipment, materials, colors, open items, etc. System must interconnect with existing audio visual equipment which will be available for view at the mandatory site visit. Primary installation shall be both ISDN and IP capable in order to integrate the system with Marine Corps standards and requirements. The contractor shall install, program and test all equipment for the creation of a fully functioning audiovisual and videoconferencing system. The subsystems will be integrated into a single conference room to provide audiovisual and videoconferencing system capability. The contractor shall place all proposed wiring within existing walls and ensure work is compliant with any applicable codes (i.e. low voltage code and classified wiring separation/plenum rated wiring, etc.). All wiring shall be concealed in a manner that matches existing color of walls/conduit unless approved by the customer. Carpet shall not be used to conceal any wiring. The contractor shall dispose of all replaced wiring and debris. The following Brand Name or Equal products provide continuity with MCLB Albany Configuration Management controls. Should the contractor provide OR EQUAL products, the products shall describe thoroughly how the proposed product meets all the characteristics and functionality. QUANTITY PART # ROOM 403 AV/VTC UPGRADES 2 SMSG-MON Re-Purpose of Existing Samsung Monitors from Carson Conference Room 1 CR-TP Crestron 12" V-Panel Touchpanel 1 CR-PRO2 Crestron Pro2 Dual Bus Processor 1 CR-75 Crestron 75 Watt Power Supply 1 CR-8SW Crestron DigitalMedia 8 X 8 Matrix Switch w/Audio 2 CMP-INT Computer Interfaces for Computer/Laptop Connectivity at Conference Table/Workstation 1 BA-NEXVC BiAmp Nexia VC Digital Signal Processor 1 DVD-PLYR Blu-Ray/DVD Player for Distance Learning 1 CR-280A Crown 280A Audio Amplifier 2 SH-MICS Shure Microphones - Integrated into Existing Conference Table 4 CR-SPKRS Crestron In-Ceiling Speakers 1 M-HDW Miscellaneous Hardware/Cables/Connectors 1 DE-INSTALL De-Installation of Existing AV System Components (AMX, Clearone, Extron, etc.) that will be replaced with Equipment Above 1 INFRS-MOD Modification of Existing Infrastructure to Accommodate Samsung Monitors 1 CSTM-INSTALL Custom Installation of AV/VTC System Components 1 CSTM-PRGM Custom Programming of AV/VTC System Components (includes Jabber Integration) 1 1YR-MNT 1 Year 24 X 7 Maintenance Services * Installation schedule shall be submitted with quote. 1. Programming - The AV/VTC system shall be programmed with functionality and ease of use as a priority. The system will be utilized by a variety of users requiring the programming interface be intuitive and easy to use, requiring minimal training, if any. The control system shall, at a minimum, control the following functions: Screen Up/Down Projector On/Off Plasma Monitors On/Off VCR/DVD Player On/Off VCR Player Control DVI/RGBHV/VGA Source Select and Destination Control Video Source select and Destination Control Camera Controls VTC Codec Control Audio Conferencing Dial Up, Connect, Disconnect, Mute, and Volume Control Program Audio Level Control Lighting Controls 2. Programming - Shall be such that an initial screen for startup is available to all users. When selected, the system shall go through a start up process which powers up all equipment to an "on" status and a ready state. During start up, the users shall not be able to make any inputs via the touch panel. A similar screen shall be displayed during the shut down process. The shut down screen shall prevent the system from being restarted until all devices have had time to reset and are again available for start up. The program design for the touch panel control interface shall be coordinated with and approved by the COR during the design phase, and shall include either conceptual drawings or screen shots for approval prior to final design. The final design of the user interface shall be reviewed and approved in writing by the COR prior co installation. 3. Programming - All programming source code will be provided to COR at the end of project. Final acceptance of the installation must meet Video Teleconference Security Technical Implementation Guide (STIG) as outlined by DISA Network Video Services (DVS) and Marine Corps standards. The VTC STIG can be found on the internet at: http://iase.disa.mil/stigs/downloads/pdf/vtc_stig_v1r1_010807_final.pdf The System must be able to be certified by Marine Corps and DOD agencies to do both classified and non-classified video conferencing. All components must meet TIA/EIA standards and be labeled accordingly. All Equipment Racks and Cabinets will be installed level and in accordance to manufacturer's specifications. All rack mounted equipment will be securely fastened using recommended manufacturer's fasteners. The contractor must provide configuration diagrams in the MS Visio and CAD formats to include any source code (if applicable). Continuity book (manual) to include: Configuration diagrams, room equipment diagrams, equipment lists, testing results (if any), and training (How to) must be provided in both hard and soft copies. The contractor shall provide documentation and plan to test the system and demonstrate, to the government, complete functionality of all components and capabilities of the integrated system. As a minimum, the documents below are required at completion of installation: - Installation Drawings - Wiring diagrams - Applicable Warranty Information - Maintenance Support Documentation - "As-built" schematics - Component Lists - Manufacturer References - User documentation for all products and services provided identified in the contract - Software programming codes and particulars to the integrated system The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the MCLB Albany/CISD via a secure data collection site. The contractor is required to completely fill in all required data fields using the following web address https://doncmra.nmci.navy.mil. Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk, linked at https://doncmra.nmci.navy.mil. All on-site work will be performed on MCLB Albany. The contractor shall follow Occupational Safety and Health Administration (OSHA) safety standards. Contractor access onto the base will be during normal duty hours, between 0700 and 1630, Monday through Friday. The contractor shall provide technical phone support twenty-four (24) hours per day, seven (7) days a week, with trained in-house staff or technicians. All routine repairs are to be performed on MCLB Albany, during normal duty hours, between 0700 and 1630, Monday through Friday. Service calls will be placed on an "as-needed" basis, to the telephone number provided by the contractor. Response time will be within eight (4) hours for both Routine and Emergency repairs. Resolution of the problem will be will be within 48 hours following receipt of the service call (not withstanding extraordinary circumstances). All system components are third party manufacturer items, not stock items, and repair times may vary. Repairs to equipment are to be done on site, or the defective item will be replaced with contractor-owned "loaner" equipment. Contractor will ensure that in most cases and within reason, the maximum time the system will be down will be 24 hours or less. PLACE OF PERFORMANCE: Communication Systems and Information Division Bldg 3500, Wing 500 Albany GA 31704 CONTRACTING OFFICE Address: MCLB 814 Radford Blvd Bldg 3500, Room 19 Albany Ga 31704 POINT OF CONTACT: Howard D. Bouldin (229) 639-6250 Howard.Bouldin@usmc.mil FAX: (229) 639-6294
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/USMC/M67001/M6700113Q2006/listing.html)
- Place of Performance
- Address: Communication Systems and Information Division, 814 Radford Blvd, Albany, Georgia, 31704, United States
- Zip Code: 31704
- Zip Code: 31704
- Record
- SN03092537-W 20130620/130618234936-14e10a86201c58ac9f3712364495ccbe (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |