MODIFICATION
C -- Weapon System Support and Analysis - Updated Draft PWS
- Notice Date
- 4/26/2013
- Notice Type
- Modification/Amendment
- NAICS
- 541330
— Engineering Services
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, AFLCMC / AFSC / AFNWC - HILL AFB, ., Hill AFB, Utah, 84056, United States
- ZIP Code
- 84056
- Solicitation Number
- FA8202-13-R-0553
- Archive Date
- 3/12/2013
- Point of Contact
- Michelle Carpenter, Phone: 801777-3559, Nathan Lee, Phone: 801-775-4928
- E-Mail Address
-
michelle.carpenter@hill.af.mil, nathan.lee@hill.af.mil
(michelle.carpenter@hill.af.mil, nathan.lee@hill.af.mil)
- Small Business Set-Aside
- N/A
- Description
- PWS Updated 26 April 2013 **DRAFT** REQUEST FOR INFORMATION A-10 Weapon System Support and Analysis NAICS: 541330 NOTICE: This is not a solicitation but rather a Request For Information (RFI) to determine potential sources for information and planning purposes only. ***PLEASE SEE NEW ATTACHED DRAFT PWS and DD2345 INSTRUCTIONS BELOW UNDER RESPONSES*** The purpose of this RFI is to conduct market research to determine if responsible sources exist, to assist in determining if this effort can be competitive and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 541330, Engineering Services, Military and Aerospace Equipment and Military Weapons which has a corresponding size standard of $35.5M. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small businesses to include 8(a), Service-Disabled Veteran-Owned, Hub zone, and Women-Owned small business concerns. The government requests that interested parties respond to this notice if applicable and identify your small business status to the identified NAICS code. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming arrangements should delineate between the work that will be accomplished by the prime and the work accomplished by the teaming partners. DESCRIPTION The Air Force is seeking potential contractors who are interested in providing engineering services to the A-10 System Program Office (SPO). This notification is a request for information to identify potential contractors who have the skills, experience, data or data-rights, and knowledge required to successfully complete this effort for the A-10 SPO at Hill Air Force Base, Utah and does not constitute a commitment, implied or otherwise, that a procurement will be accomplished. This is not a request for proposal or invitation for bid. To be considered as a potential source for this requirement, a Contractor will be required to submit data in response to the future solicitation, verifying capabilities to meet the requirements on solicitation. The contractor is requested to respond to this RFI as identified in the "Responses" section of this RFI. Based on the "Notes" section of this RFI, it shall not be construed that the Government for contractor responses to this RFI. BACKGROUND The A-10 SPO is the primary integrator for all modifications and sustainment changes for the weapon system and the current and anticipated dynamic battlefield environments drive many modernization and sustainment changes to the A-10 legacy aircraft, creating unique requirements to maintain the A-10 throughout its life cycle. Modifications affecting all A-10 functional areas and interfaces to include mechanical, structural, electrical, avionics, weapons, support equipment and operational flight programs (OFP), continue to evolve at an unprecedented pace. Starting with the A-10 Wing Replacement Program (WRP), the A-10 SPO has implemented Siemens Product Lifecycle Management (PLM) products for configuration and control of 3D models and all associated technical data. The currently owned and used products are the basic TeamCenter Configuration Management Module and the TeamCenter In-service (Maintenance, Repair and Overhaul (MRO)) module. As a result of the success on the WRP, the A-10 SPO is expanding the use of Siemens PLM technology and processes for other elements and lifecycle processes of the A-10 aircraft. The A-10 WRP TeamCenter Steering Committee has developed an implementation outline including such capabilities to include but not limited to additional functionality for engineering, interfaces with USAF systems, support for commodities, supplier interaction, and depot support. As the use of TeamCenter PLM technology and processes spreads beyond the WRP's current release, a more detailed implementation strategy, roadmap and plan is required. This plan needs to consider and dovetail with the Air Force PLM Initiative (PLMi) strategy plan, the A-10 SPO realignment with Air Force Life Cycle Management Center (AFLCMC) Fighters and Bombers Program Executive Office (PEO) and the Siemens PLM product roadmap. A-10 SPO requires support to develop and execute such an implementation strategy, roadmap, and plan. The goal of the new A-10 SPO Process, System Design and Implementation Support services is threefold: a. Refine/Develop a Strategy and Implementation Plan for the continual improvement and expansion of the current TeamCenter environment for configuration management across the rest of the weapon system. b. Refine/Develop, map and document standard logistics and engineering processes and procedures and their information technology interfaces for the sustainment of the A-10 in the AF inventory. c. Further develop standard engineering processes and policy (tools, templates and training) for efficient future acquisition and sustainment of the A-10 aircraft. OBJECTIVE This effort is to acquire engineering services to identify new and developing technologies that can support the accomplishment of A-10 missions and either eliminate or minimize operational and/or sustainability gaps. The Contractor will have to perform integrated systems engineering to deconflict and integrate A-10 baselines, architecture, programs and processes. These include the necessary tools, templates and training for efficient future acquisition and sustainment of the A-10 aircraft. Specific tasks include the provision of a deconfliction matrix, updates, integration and support of products, views or documents called out in the Performance Work Statement (PWS), the analysis for the Support Equipment Roadmap, baseline maintenance, A-10 Weapon System Management Environment (AWSME) maintenance, TeamCenter software support, and configuration technical support. The Contractor must obtain applied knowledge of current Air Force Systems and maintenance engineering processes, as well as logistics management best practices using ERP/APS processes in governmental agencies. Additional knowledge specifically related to Department of Defense (DoD) and Air Force logistics goals, objectives, and current practices is also required. The Contractor must be familiar with the DoD Architecture Framework (DODAF) 2.0, as well as the documents listed in the Appendices of the PWS. TASK REQUIREMENTS See attached PWS (Draft) **NEW AS OF 26 April 2013** RESPONSES The following steps must occur to acquire the data referred to in the PWS, via CD. The distribution of the data is authorized and restricted to DoD and U.S. DoD contractors with a valid form DD 2345 only, for Administrative or Operational use. I.Fill out completed the AF form 2345, Military Critical Technical Data Agreement, at the link: http://www.dlis.dla.mil/JCP and send to the appropriate office listed at the top of the form. The process may take up to 5 working days for approval. II. After the form is signed by DoD official and returned to Offeror, send completed form with a request for CD to point of contacts in solicitation via e-mail. III. Please check the form DD 2345, in block 4, where it lists "the description of relevant business activity", that the offeror has certification in the areas of aircraft sustainment or any of the aircraft component systems. IV. CD will be sent to Offeror after Contracting receives e-mail and form DD 2345 at the time the RFP is released. Please note that the Government will not exclude any specific contractor from competition on this requirement, unless a contractor is automatically excluded as a result of a regulatory exclusion of certain type of contractors (e.g. small business set-aside). NOTES This is not a request for proposal (RFP) or an invitation for bid, nor is it to be construed as a commitment by the Government. The Government does not intend to make an award on the basis of this sources sought synopsis/RFI for information or otherwise pay for the information solicited herein. Copies of the submitted information will be reproduced and review may be used to develop a request for proposal. Only non-classified information shall be provided in your response, and your response should be reviewed to assure that there are not any operational sensitivities identified. Contract performance may also involve data that is subject to export control laws and regulations. Only contractors who are registered and certified with the Defense Logistics Services Center, and have an approved DD Form 2345, will be provided copies of any related solicitation (including DRAFT RFP) or other data subject to foreign disclosure restrictions. CONTACT INFORMATION Primary points of contact are: • Michelle Carpenter, Contract Negotiator at michelle.carpenter@hill.af.mil • Nathan Lee, Contracting Officer at nathan.lee@hill.af.mil • Keith Lewis, Program Office at keith.lewis@hill.af.mil Address: Department of the Air Force, Air Force Materiel Command, OO-ALC/WWAK, 6072 Fir Ave, Bldg 1233 Hill AFB, UT, 84056 NOTE: Our office intends to hold an Industry Day prior to the end of February; thus, we request all responses by 8 February 2013 to allow time for further clarifications before the Industry Day. A separate announcement will be sent to each responder and posted on FedBizOpps announcing the official Industry Day and details. At that time, interested parties must submit the names of all people planning on coming to Industry Day to Michelle Carpenter (contact information listed above). There will be a maximum of three persons allowed for each party attending Industry Day. An Industry Day has been scheduled for 6 March 2013. Please see the attached document pertaining to the Industry Day.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OOALC/FA8202-13-R-0553/listing.html)
- Place of Performance
- Address: Department of the Air Force, Air Force Materiel Command, OO-ALC/WWAK, 6072 Fir Ave, Bldg 1233, Hill AFB, Utah, 84056, United States
- Zip Code: 84056
- Zip Code: 84056
- Record
- SN03046605-W 20130428/130426234142-2aa9c81f821e96eb48b473a127240d8e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |